Measurement of wall friction in direct shear tests on soft soil

If the free vertical movement of the upper rigid part of the shear box is hindered during shearing, a frictional force is mobilized between the specimen and the vertical walls of the shear box. This causes either unloading (for contractant soils) or additional loading (for dilatant soils) of the specimen during shearing. If no correction of the applied vertical load with respect to the wall friction is taken into account, the resulting shear strength can be either underestimated (for contractant soils) or overestimated (for dilatant soils). For example, in a particular investigation of a normally consolidated soil, the measured friction angle from a direct shear test was almost 8° smaller than the angle from a triaxial test. This paper, therefore, presents a method for direct measurement of the frictional force at the contact between the vertical walls of the box and a fine-grained soil. If the wall friction is taken into account, the friction angle from the shear box coincides well with the angle from triaxial tests. If the wall friction cannot be measured during the test, a sufficiently large vertical gap should be adjusted in case of soft soils, in order to enable non-restrained settlement of the upper part of the box during specimen contraction.     

Regional stratigraphy and distribution of epigenetic stratabound celestine, fluorite, barite and Pb–Zn deposits in the MVT province of northeastern Mexico

Northeastern Mexico hosts numerous epigenetic stratabound carbonate-hosted low-temperature hydrothermal deposits of celestine, fluorite, barite and zinc-lead, which formed by replacement of Mesozoic evaporites or carbonate rocks. Such deposits can be permissively catalogued as Mississippi Valley-type (MVT) deposits. The deposits studied in the state of Coahuila are associated with granitic and metasedimentary basement highs (horsts) marginal or central to the Mesozoic Sabinas Basin. These horsts controlled the stratigraphy of the Mesozoic basins and subsequently influenced the Laramide structural pattern. The Sabinas Basin consists of ~6,000-m-thick Jurassic to Cretaceous siliciclastic, carbonate and evaporitic series. The MVT deposits are mostly in Barremian and in Aptian-Albian to Cenomanian formations and likely formed from basinal brines that were mobilized during the Laramide orogeny, although earlier diagenetic replacement of evaporite layers (barite and celestine deposits) and lining of paleokarstic cavities in reef carbonates (Zn–Pb deposits) is observed. Fluid inclusion microthermometry and isotopic studies suggest ore formation due to mixing of basinal brines and meteoric water. Homogenization temperatures of fluid inclusions range from 45°C to 210°C; salinities range from 0 to 26 wt.% NaCl equiv., and some inclusions contain hydrocarbons or bitumen. Sulfur isotope data suggest that most of the sulfur in barite and celestine is derived from Barremian to Cenomanian evaporites. Regional geology and a compilation of metallogenic features define the new MVT province of northeastern Mexico, which comprises most of the state of Coahuila and portions of the neighboring states of Nuevo León, Durango and, perhaps extends into Zacatecas and southern Texas. This province exhibits a regional metal zonation, with celestine deposits to the south, fluorite deposits to the north and barite and Zn–Pb deposits mostly in the central part.     

Surface changes on crystalline stones due to salt crystallisation

This study assesses the changes on the surface of crystalline stones due to salt crystallisation. Efflorescence was forced to grow on the surface of granite and marbles through 60 cycles of salt crystallisation with sodium sulphate. Changes on surface roughness, gloss and colour were measured every 15 cycles and the specimens were examined with naked eye and SEM. Sodium sulphate produces damage which depends on mineral composition. Results show that granites experience a mechanical decay with an increase in roughness. Peaks of mica can be observed on the surface and cracks widen and grow deeper. Colour and gloss do not show any significant change, although gloss decreases with an increase in surface roughness. In marbles, the decay is mainly chemical. Surface roughness increases due to dissolution of the calcite. White marbles exhibit yellowing. Gloss decreases during the first cycles—as grain boundaries become more visible—but tends to regain almost its initial value as the number of cycles increases. In this case, gloss does not show any relation with surface roughness.     

New ichnospecies of scratching traces from phosphatic nodules (Cenomanian, England)

Surfaces of phosphorite nodules and pebbles from the “Cambridge Green Sand” (Cenomanian, South England) yielded several discernible types of scratches. These originated before the burial of nodules/pebbles as evidenced by fossil epibiotic oysters cemented to cover the scratches. The individual forms of scratches differ in size and shape; therefore, the set of “scratching instruments” also had to be different. The scratches described differ from scratches generated by glacial processes, namely by the regularity of length and intervals, parallel orientation, existence of recurrent forms and placement along the nodule edges. We interpret the scratches as trace fossils of the ichnogenus Machichnus. Three new species, namely M. normani, M. harlandi and M. jeansi, are erected for them herein. The series of scratches originated probably by teeth on a couple of jaws; the makers possibly scraped bacterial or algal film off the surface of nodules that were covered with the phosphate gel. Both homodont and heterodont animals (probably fish) were involved.     

Determination of ecological significance based on geostatistical assessment: a case study from the Slovak Natura 2000 protected area

The Sitno Natura 2000 Site covers an area of 935,56 hectares. The Sitno region is significant due to the number of rare and endangered species of plants, and as a result is considered a location of great importance to the maintenance of floral gene pools. The study area suffers human impacts in the form of tourism. The main purpose of this study is to the measure landscape elements, determine the ecological significance of habitats within the Sitno area, and from this data, organize the study area into conservation zones. The results of this landscape quantification are numerical values that can be used to interpret the quality of ongoing ecological processes within individual landscape types. Interpretation of this quantified data can be used to determine the ecological significance of landscapes in other study areas. This research examines the habitats of Natura 2000 Sites by a set of landscape metrics for habitat area, size, density, and shape, such as Number of patches (NP), Patch density (PD), Mean patch size (MPS), Patch size standard deviation (PSSD) and Mean shape index (MSI). The classification of land cover patches is based on the Annex Code system.     

Geoheritage values of one of the largest maar craters in the Arabian Peninsula: the Al Wahbah Crater and other volcanoes (Harrat Kishb, Saudi Arabia)

Al Wahbah Crater is one of the largest and deepest Quaternary maar craters in the Arabian Peninsula. It is NW-SE-elongated, ～2.3 km wide, ～250 m deep and surrounded by an irregular near-perpendicular crater wall cut deeply into the Proterozoic diorite basement. Very few scientific studies have been conducted on this unique site, especially in respect to understanding the associated volcanic eruption processes. Al Wahbah and adjacent large explosion craters are currently a research subject in an international project, Volcanic Risk in Saudi Arabia (VORiSA). The focus of VORiSA is to characterise the volcanic hazards and eruption mechanisms of the vast volcanic fields in Western Saudi Arabia, while also defining the unique volcanic features of this region for use in future geoconservation, geoeducation and geotourism projects. Al Wahbah is inferred to be a maar crater that formed due to an explosive interaction of magma and water. The crater is surrounded by a tephra ring that consists predominantly of base surge deposits accumulated over a pre-maar scoria cone and underlying multiple lava flow units. The tephra ring acted as an obstacle against younger lava flows that were diverted along the margin of the tephra ring creating unique lava flow surface textures that recorded inflation and deflation processes along the margin of the post-maar lava flow. Al Wahbah is a unique geological feature that is not only a dramatic landform but also a site that can promote our understanding of complex phreatomagmatic monogenetic volcanism. The complex geological features perfectly preserved at Al Wahbah makes this site as an excellent geotope and a potential centre of geoeducation programs that could lead to the establishment of a geopark in the broader area at the Kishb Volcanic Field.     

Hydrogeological research on intensively exploited deep aquifers in the ‘Loma de Úbeda’ area (Jaén, southern Spain)

The intensive use of groundwater for irrigation in the area of Úbeda (‘Loma de Úbeda’, Jaén, southern Spain) has transformed an area of traditionally rain-fed dry farmland into fields with some of the highest olive oil productivity in the world. Early hydrogeological research studies, initiated just after the beginning of the groundwater exploitation, revealed that the water was collected from three different overlapping aquifers occupying an area of over 1,100 km², with the lower aquifers located at depths from 300 to over 700 m in an area of 440 km². Multidisciplinary research, based on geological characterization, and piezometric, hydrochemical and isotopic data, has led to a conceptual model of functioning in this complex hydrogeological system. The proposed model allows for the identification of the recharge areas, and the discharge, which is at present mainly associated with the groundwater pumping. Areas of mixing of waters from the different aquifers and the main hydrogeochemical processes affecting groundwater quality are described.     

Compartmented flow at the Bátaapáti site in Hungary

Integration of hydrogeological and geological data into a conceptual model is critical for site investigation programs, since this model is the basis for hydrogeological modeling and for engineering. In the Hungarian Radioactive Waste Disposal Investigation Program, several methods have been used to characterize the potential host rock (granite) at the Bátaapáti site for a repository for low and intermediate level radioactive waste. Hydrogeological data acquisition revealed some characteristic aspects of the site. One of the most important is the presence of extensive rock deformation zones (faults) with low hydraulic conductivity, which strongly reduce the direct hydraulic communication between adjacent blocks of rock (compartmentalization). This characteristic of the rock mass results in a mosaic-like distribution of rock compartments, each with an almost constant hydraulic head. Within the compartments, hydraulic tests have shown that transmissivity is strongly scale dependent: the larger the scale, the higher the measured transmissivity. The extensive highly transmissive zones cause very low hydraulic gradients within each block, thus the transport processes are strongly influenced by the low or average transmissivity zones and the rock matrix.     

Image analysis applied to quantitative evaluation of chromatic impact generated by open-pit quarries and mines

One of the most important environmental impacts resulting from opencast mining, and especially quarries, is the visual impact. Evaluation of this impact considers two aspects: first, the area occupied by the quarry as seen by an observer from a specific place, and, second, the chromatic contrast existing between landscape and exploitation. In this study we develop a methodology to assess the chromatic impact in an objective and comparable form. To assess this impact we developed a method based on image analysis that allows us to obtain from a picture or image its equivalent as a function of chromatic impact, according to the sensibility of the human eye to different wavelengths. The methodology was applied to the Martinenca limestone quarry (Alcanar, Tarragona) and to Cerro Kori Kollo mine, La Joya district (Bolivia).     

A powder diffraction quantification method (ALJOR) for atmospheric particulate matter

The percentage calculation of crystalline phases in atmospheric particulate matter samples by means of an adiabatic approach of the matrix-flushing method with preferred preparations that avoids preferential orientations, should never be interpreted as absolute values. On the contrary, it should be seen as an indicator of the significant differences between each and every analyzed sample. Factors such as the application of constants, which are only useful for preparations of polycrystalline samples free of preferential orientation, and/or like the deficient resolution shown by the diffraction diagrams for certain phyllosilicate phases, bring a high degree of uncertainty to these percentage calculations. An alternative method of crystalline and amorphous phase quantification is presented below. Once the majority phases in the samples were identified, appropriate pure phases corresponding to each of them were selected. Then, the corresponding calibration curves were built using corundum (number 676 NIST) as a reference pattern phase. After validating the obtained calibration curves, the constants corresponding to each phase and selected spacing were calculated. The ALJOR method has been used for the quantification of five samples.