A model of an exploding,radiating star in general relativity

In a previous paper Adams, Cary and Cohen (1994) presented a model of a supernova. In that paper the equations of General Relativity describing the evolution of a spherically symmetric, radiating star were solved analytically. The evolution of the star was determined by the application of boundary conditions at the center and at the edge. Due to lmitations in the presupernova model, only the very slow inward motion of an unstable, degenerate core could be considered. The solution was also limited by the need to exclude a runaway term, one that increased exponentially with time. Without the exclusion of the runaway, the luminosity would have increased without bound and the mass would have become negative.This paper presents a completely analytic solution to the equations of General Relativity describing the evolution of a Type II supernova. Professor S.E. Woosley kindly gave us data on the physical variables of a 12M ₀ presupernova star. In our model the core collapses within 1 s, leaving a 1.3M ₀ remnant. Shortly afterward 10.6M ₀ is ejected to infinity, and 0.17M ₀ is radiated away in the form of neutrinos. The distance of the edge from the center increases proportionally to the two-thirds power of the time. The luminosity decreases proportionally to the inverse four-thirds power.Although the runaway solution was modified by the exploding rather than a static envelope, it must still be excluded by adjusting initial conditions. Its character is changed from an exponential to a very large power (55) of time. The removal of a degree of freedom by this exclusion leads to physically non-sensical results such as negative luminosity. The inclusion of a term describing motion of the mantle due to neutrino interactions provides the additional degree of freedom necessary for physically reasonable results.     

A deep-sea in-situ suspended sediment sampling system: Comment

A recent article by Beer et al. (1974) in Marine Geology describes an in-situ suspended sediment sampling system which utilizes a pump/motor unit, filter holders, and a lead-acid battery power source. Two aspects of their article may be misleading: the use of certain filter material as X-ray diffraction mounts, and the technique by which an oil-filled battery case may be operated.     

Spectral development of a solar X-ray burst observed on OSO-7

The UCSD solar X-ray instrument on the OSO-7 satellite observes X-ray bursts in the 2–300 keV range with 10.24 s time resolution. Spectra obtained from the proportional counter and scintillation counter are analyzed for the event of November 16, 1971, at 0519 UT in terms of thermal (exponential spectrum) and non-thermal (power law) components. The energy content of the approximately 20 × 10⁶K thermal plasma increased with the 60 s duration hard X-ray burst which entirely preceded the 5 keV soft X-ray maximum. If the hard X-rays arise by thick target bremsstrahlung, the nonthermal electrons above 10 keV have sufficient energy to heat the thermally emitting plasma. In the thin target case the collisional energy transfer from non-thermal electrons suffices if the power law electron spectrum is extrapolated below 10 keV, or if the ambient plasma density exceeds 4 × 10¹⁰ cm^–3.Formerly at UCSD.     

中尺度流域土地利用/土地覆盖变化评估--以伊洛河中部地区为例

将规范分析与实证分析相结合，提出了一个评估区域各点位土地利用／土地覆盖变化的新方法：（1）采用相对原则观察一时段内的变化方向；（2）物理模型与统计模型相结合，基于区域实际情况建立生境适宜性参照基准；（3）用多变量分析方法量度各点位与参照基准的差异。结合GIS和遥感技术，这种方法被应用于伊洛河中部地区的研究中。     

Geochemistry and origin of the Proterozoic ultrapotassic rocks of the Churchill Province,Canada

Summary Early Proterozoic ultrapotassic dikes, lava flows, and pyroclastic rocks of the Christopher Island Formation (CIF) erupted throughout an area 600 × 300 km within the Churchill Province of the Canadian Shield at 1.84 Ga. The rocks range from mafic lamprophyres (mg # 60; SiO₂ 47–54%, mean K₂O/Na₂O > 4) with phenocrysts of phlogopite + diopside + apatite ± olivine ± magnetite, to phenocryst-poor felsic rocks and sanidine porphyries (SiO₂55–69%). All samples have high incompatible element contents and display large depletions of high field strength elements relative to K, Rb, Sr, Ba, and Th. The CIF has geochemical and petrographic characteristics of both minettes and lamproites, but overall most closely resembles young Mediterranean lamproites. Felsic rocks of the CIF were produced by crystal fractionation and crustal contamination of mafic ultrapotassic magma, and include both high-silica lamproites strongly enriched in Zr, U, and Th, and weakly potassic to sodic rocks of trachytic composition. Flows and feeder dikes have relatively homogeneous _{Nd, 1840 Ma} (–6 to –11) but highly variable ES., 1840 Ma (–40 to + 100); samples classified as lamproites have higher average _Sr. Dike samples have highly variable present-day Pb isotope compositions, ranging from moderately to strongly nonradiogenic. Geochemical and isotopic data are consistent with contributions from depleted Archean lithospheric mantle, and OIB-type convecting mantle, both metasomatized by subduction-related processes during the Early Proterozoic. The lithospheric mantle probably contained Archean enriched domains as well. Proterozoic enrichment may have accompanied shallow underplating of subducted oceanic lithosphere beneath the Churchill Province during amalgamation of the Laurentian supercontinent. There are strong analogies in isotopic composition, and interpreted source region history, between the CIF and lamproites and minettes of the Wyoming Province and western Greenland, which suggest the existence of a Laurentian ultrapotassic superprovince.

---

Geochemie und Entstehung der Proterozoischen ultrapotassischen Gesteine der Churchill Provinz, Kanada

Zusammenfassung Altproterozoische, ultrapotassische Gänge, Lavaströme und pyroklastische Gesteine der Christopher Island Formation (CIF), eruptierten in einem Gebiet von 600 × 300 km in der Churchill Provinz des Kanadischen Schildes vor 1.84 Ga. Die Zusammensetzung dieser Gesteine variiert von mafischen Lamprophyren (mg > 60; SiO₂ = 47–54%, durchschnittliches K₂O/Na₂O > 4) mit Phänokristallent von Phlogopit + Diopsid + Apatit + Olivin + Magnetit, bis zu phänokristallarmen felsischen Gesteinen und Sanidinporphyren (SiO₂ = 55–69%). Alle Proben zeigen hohe Gehalte an inkompatiblen Elementen und zeigen beträchtliche Verarmung an high field strength Elementen relativ zu K, Rb, Sr, Ba und Th. Die CIF hat geochemische und petrographische Eigenschaften sowohl von Minetten wie von Lamproiten, aber im allgemeinen ähnelt sie am stärksten jungen mediterranen Lamproiten. Felsische Gesteine der CIF wurden durch Fraktionierung und Krustenkontamination aus mafischen ultrapotassischen Magmen gebildet. Letztere umfassen sowohl siliziumreiche Lamproite, die deutlich an Zr, U und Th angereichert sind und schwach potassische bis sodische Gesteine von trachytischer Zusammensetzung. Lavenergüsse und zufuhrgänge zeigent ein relativ homogenes _{Nd, 1840 Ma} (–6 bis –11) aber ein sehr variables _{Sr, 1840 Ma} (-40 bis + 100); Proben die als Lamproite klassifiziert wurden, zeigent höhere durchschnittliche _Sr-Werte. Proben von Gängen haben sehr variable Bleiisotopen-Zusammensetzungen, die von mäßig bis stark nichtradiogen variieren. Geochemische und Isotopendaten weisen auf Beiträge aus verarmtem archaischen lithosphärischen Mantel und aus konvektierendem OIB-Typ Mantel hin, die beide während des Alproterozoikums durch Subduktions-Vorgänge metasomatisiert wurden. Der lithosphärische Mantel enthielt wahrscheinlich auch angereicherte archaische Domänen. Proterozoische Anreicherungsvorgänge dürften seichtes Underplating subduzierter ozeanischer Lithosphäre unter der Churchill Provinz während der Amalgamation des laurentischen Superkontinentes begleitet haben. Es gibt starke Analogien in der Isotopenzusammensetzung und in der interpretierten Geschichte der Ursprungsregion, zwischen den CIF und Lamproiten und Minetten der Wyoming Provinz, und des westlichen Grönland. Diese weisen auf die Existenz einer laurentischen ultrapotassischen Superprovinz hin.

---

---

With 7 Figures     

A real-time software backend for the GMRT

The new era of software signal processing has a large impact on radio astronomy instrumentation. Our design and implementation of a 32 antennae, 33 MHz, dual polarization, fully real-time software backend for the GMRT, using only off-the-shelf components, is an example of this. We have built a correlator and a beamformer, using PCI-based ADC cards and a Linux cluster of 48 nodes with dual gigabit inter-node connectivity for real-time data transfer requirements. The highly optimized compute pipeline uses cache efficient, multi-threaded parallel code, with the aid of vectorized processing. This backend allows flexibility in final time and frequency resolutions, and the ability to implement algorithms for radio frequency interference rejection. Our approach has allowed relatively rapid development of a fairly sophisticated and flexible backend receiver system for the GMRT, which will greatly enhance the productivity of the telescope. In this paper we describe some of the first lights using this software processing pipeline. We believe this is the first instance of such a real-time observatory backend for an intermediate sized array like the GMRT.     

Environmental Radioxenon Levels in Europe: a Comprehensive Overview

Activity concentration data from ambient radioxenon measurements in ground level air, which were carried out in Europe in the framework of the International Noble Gas Experiment (INGE) in support of the development and build-up of a radioxenon monitoring network for the Comprehensive Nuclear-Test-Ban Treaty verification regime are presented and discussed. Six measurement stations provided data from 5 years of measurements performed between 2003 and 2008: Longyearbyen (Spitsbergen, Norway), Stockholm (Sweden), Dubna (Russian Federation), Schauinsland Mountain (Germany), Bruyères-le-Châtel and Marseille (both France). The noble gas systems used within the INGE are designed to continuously measure low concentrations of the four radioxenon isotopes which are most relevant for detection of nuclear explosions: ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe with a time resolution less than or equal to 24 h and a minimum detectable concentration of ¹³³Xe less than 1 mBq/m³. This European cluster of six stations is particularly interesting because it is highly influenced by a high density of nuclear power reactors and some radiopharmaceutical production facilities. The activity concentrations at the European INGE stations are studied to characterise the influence of civilian releases, to be able to distinguish them from possible nuclear explosions. It was found that the mean activity concentration of the most frequently detected isotope, ¹³³Xe, was 5–20 mBq/m³ within Central Europe where most nuclear installations are situated (Bruyères-le-Châtel and Schauinsland), 1.4–2.4 mBq/m³ just outside that region (Stockholm, Dubna and Marseille) and 0.2 mBq/m³ in the remote polar station of Spitsbergen. No seasonal trends could be observed from the data. Two interesting events have been examined and their source regions have been identified using atmospheric backtracking methods that deploy Lagrangian particle dispersion modelling and inversion techniques. The results are consistent with known releases of a radiopharmaceutical facility.     

Echo mapping of active galactic nuclei

Echo mapping makes use of the intrinsic variaibility of the continuum source in active galactic nuclei to map out the distribution and kinematics of line‐emitting gas from its light travel time‐delayed response to continuum changes. Echo mapping experiments have yielded sizes for the broad line‐emitting region in about three dozen AGNs. The dynamics of the line‐emitting gas seem to be dominated by the gravity of the central black hole, enabling measurement of the black‐hole masses in AGNs. We discuss requirements for future echo‐mapping experiments that will yield the high‐quality velocity–delay maps of the broad‐line region that are needed to determine its physical nature. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Guiding ecological principles for marine spatial planning

The declining health of marine ecosystems around the world is evidence that current piecemeal governance is inadequate to successfully support healthy coastal and ocean ecosystems and sustain human uses of the ocean. One proposed solution to this problem is ecosystem-based marine spatial planning (MSP), which is a process that informs the spatial distribution of activities in the ocean so that existing and emerging uses can be maintained, use conflicts reduced, and ecosystem health and services protected and sustained for future generations. Because a key goal of ecosystem-based MSP is to maintain the delivery of ecosystem services that humans want and need, it must be based on ecological principles that articulate the scientifically recognized attributes of healthy, functioning ecosystems. These principles should be incorporated into a decision-making framework with clearly defined targets for these ecological attributes. This paper identifies ecological principles for MSP based on a synthesis of previously suggested and/or operationalized principles, along with recommendations generated by a group of twenty ecologists and marine scientists with diverse backgrounds and perspectives on MSP. The proposed four main ecological principles to guide MSP—maintaining or restoring: native species diversity, habitat diversity and heterogeneity, key species, and connectivity—and two additional guidelines, the need to account for context and uncertainty, must be explicitly taken into account in the planning process. When applied in concert with social, economic, and governance principles, these ecological principles can inform the designation and siting of ocean uses and the management of activities in the ocean to maintain or restore healthy ecosystems, allow delivery of marine ecosystem services, and ensure sustainable economic and social benefits.     

MedFlux: Investigations of particle flux in the Twilight Zone

The MedFlux project was devised to determine and model relationships between organic matter and mineral ballasts of sinking particulate matter in the ocean. Specifically we investigated the ballast ratio hypothesis, tested various commonly used sampling and modeling techniques, and developed new technologies that would allow better characterization of particle biogeochemistry. Here we describe the rationale for the project, the biogeochemical provenance of the DYFAMED site, the international support structure, and highlights from the papers published here. Additional MedFlux papers can be accessed at the MedFlux web site (http://msrc.sunysb.edu/MedFlux/).