Late Quaternary chironomid community structure shaped by rate and magnitude of climate change

Much is known about how climate change impacts ecosystem richness and turnover, but we have less understanding of its influence on ecosystem structures. Here, we use ecological metrics (beta diversity, compositional disorder and network skewness) to quantify the community structural responses of temperature-sensitive chironomids (Diptera: Chironomidae) during the Late Glacial (14 700–11 700 cal a bp ) and Holocene (11 700 cal a bp to present). Analyses demonstrate high turnover (beta diversity) of chironomid composition across both epochs; however, structural metrics stayed relatively intact. Compositional disorder and skewness show greatest structural change in the Younger Dryas, following the rapid, high-magnitude climate change at the Bølling–Allerød to Younger Dryas transition. There were fewer climate-related structural changes across the early to mid–late Holocene, where climate change was more gradual and lower in magnitude. The reduced impact on structural metrics could be due to greater functional resilience provided by the wider chironomid community, or to the replacement of same functional-type taxa in the network structure. These results provide insight into how future rapid climate change may alter chironomid communities and could suggest that while turnover may remain high under a rapidly warming climate, community structural dynamics retain some resilience.     

On the Application of the Novel Thin Spray-on Liner (TSL): A Progress Report in Mining Operations

Stability is the main problem in underground excavations that can result in rock-related accidents or closure of mines. This is often controlled by the geological condition of the rockmass and the in situ stress field where excavation is being carried out. Over the years, conventional support systems such as bolts, shotcrete and mesh have been the standard support systems used in difficult ground conditions to maintain stability of underground openings. The novel Thin Spray Liner (TSL) is a technology with an improvement in terms of support capabilities for difficult geological conditions. This technology is predicted to replace conventional support systems, as it offers a significant yielding capacity that is better than that of the traditional techniques of controlling strata. The performance of the TSL lies between that of shotcrete and wire mesh. The TSL has numerous advantages regarding rock reinforcement such as rapid curing period, fast application, high tensile strength, high adhesion properties that prevent movement of rock keyblocks, improved cycle times, reduction in material-handling compared to shotcrete, and a significant ability to penetrate joints. These advantages increase the allowance for mechanisation and improvement of safety in excavations. Despite various benefits of TSLs, there are shortcomings which make end-users to be sceptical about the technology. This study provides a detailed review of the mechanism, properties, composition and types, as well as the general and mining applications of TSLs. It also describes the challenges faced by the mining industry and other end-users in accepting the technology as a solution for stability issues in underground openings. In addition, some insightful suggestions are made as recommendations for future work on the development of suitable, effective and efficient thin surface rock support technology within limitations/constraints.

     

Identification of Mineralization in Geochemistry Along a Transect Based on the Spatial Curvature of Log-Ratios

Detecting subcropping mineralizations but also deeply buried mineralizations is one important goal in geochemical exploration. The identification of useful indicators for mineralization is a difficult task, as mineralization might be influenced by many factors, including location, investigated media and depth. Here, a statistical method is proposed which indicates chemical elements related to mineralization along a transect. Moreover, the method determines the potential area of the deposit along a transect. The identification is based on general additive models (GAMs) for the element concentrations across the spatial coordinate(s). The log-ratios of the GAM fits are taken to compute the curvature, where high and narrow curvature is supposed to indicate the mineralization area. By defining a measure for the quantification of high curvature, the log-ratios can be ranked, and elements can be identified that are indicative of the anomaly patterns.

     

Resistivity of reservoir sandstones and organic rich shales on the Barents Shelf:Implications for interpreting CSEM data

Marine controlled source electromagnetic(CSEM)data have been utilized in the past decade during petroleum exploration of the Barents Shelf,particularly for de-risking the highly porous sandstone reservoirs of the Upper Triassic to Middle Jurassic Realgrunnen Subgroup.In this contribution we compare the resistivity response from CSEM data to resistivity from wireline logs in both water-and hydrocarbon-bearing wells.We show that there is a very good match between these types of data,particularly when reservoirs are shallow.CSEM data,however,only provide information on the subsurface resistivity.Careful,geology-driven interpretation of CSEM data is required to maximize the impact on exploration success.This is particularly important when quantifying the relative re-sistivity contribution of high-saturation hydrocarbon-bearing sandstone and that of the overlying cap rock.In the presented case the cap rock comprises predominantly organic rich Upper Jurassic-Early Cretaceous shales of the Hekkingen Formation(i.e.a regional source rock).The resistivity response of the reservoir and its cap rock become merged in CSEM data due to the transverse resistance equivalence principle.As a result of this,it is imperative to understand both the relative contributions from reservoir and cap rock,and the geological sig-nificance of any lateral resistivity variation in each of the units.In this contribution,we quantify the resistivity of organic rich mudstone,i.e.source rock,and reservoir sandstones,using 131 exploration boreholes from the Barents Shelf.The highest resistivity(＞10,000 Ωm)is evident in the hydrocarbon-bearing Realgrunnen Subgroup which is reported from 48 boreholes,43 of which are used for this study.Pay zone resistivity is primarily controlled by reservoir quality(i.e.porosity and shale fraction)and fluid phase(i.e.gas,oil and water saturation).In the investigated wells,the shale dominated Hekkingen Formation exhibits enhanced resistivity compared to the background(i.e.the underlying and overlying stratigraphy),though rarely exceeds 20Ωm.Marine mudstones typically show good correlation between measured organic richness and resistivity/sonic velocity log signatures.We conclude that the resistivity contribution to the CSEM response from hydrocarbon-bearing sandstones out-weighs that of the organic rich cap rocks.     

Blind Source Separation for Compositional Time Series

Many geological phenomena are regularly measured over time to follow developments and changes. For many of these phenomena, the absolute values are not of interest, but rather the relative information, which means that the data are compositional time series. Thus, the serial nature and the compositional geometry should be considered when analyzing the data. Multivariate time series are already challenging, especially if they are higher dimensional, and latent variable models are a popular way to deal with this kind of data. Blind source separation techniques are well-established latent factor models for time series, with many variants covering quite different time series models. Here, several such methods and their assumptions are reviewed, and it is shown how they can be applied to high-dimensional compositional time series. Also, a novel blind source separation method is suggested which is quite flexible regarding the assumptions of the latent time series. The methodology is illustrated using simulations and in an application to light absorbance data from water samples taken from a small stream in Lower Austria.

     

Modeling and Fitting of Three-Dimensional Mineral Microstructures by Multinary Random Fields

Mathematical Geosciences - Modeling a mineral microstructure accurately in three dimensions can render realistic mineralogical patterns which can be used for three-dimensional processing...     

Sea-level rise impacts on longitudinal salinity for a low-gradient estuarine system

Climatic Change - Salinity response to sea-level rise is evaluated for a low-gradient, tidally active estuary, the lower St. Johns River, Florida. A high-resolution numerical model is forced by...     

Chemical Composition of Ancient Celadon Material （1127-1279 A.D.） from Zhejiang, China and Its Implication

The microprobe EDXRF equipment was used for analysis of the major and trace elements in glaze layer-transitive layer-body layer of the celadon from the Altar Yao （Kiln） and Laohudong Yao in the Southern Song Dynasty （1127-1279 A.D.）, Zhejiang, China. The K values of the discriminant factor for the celadon wares are larger than 8, which means the celadon of the Altar Yao and Laohudong Yao are different from that of the Longquan Yao. The former two belong to the Guan Yao system （the Chinese imperial kilns）, but the latter to the Min Yao system （the Chinese popular kilns）. The principle component analysis shows their relationship between the Altar and Laohudong wares with provenance postulation. The thickness of the transitive layer in the Altar and Laohudong wares is obviously different, which reveals the microstructure characteristics of the celadon even though both kinds of wares belong to the imperial kiln system.     

Aspects of dinantian sedimentation in the edale basin,north derbyshire

The Dinantian Edale Basin is located to the north of the Derbyshire carbonate platform and underlies the Upper Carboniferous of the central Pennines. The Edale Basin was thought to be part of a large basin which extended from the Derbyshire carbonate platform to the Askrigg Block. The presence of aggregate grains and ooids in the Alport Borehole suggests that a carbonate platform, possibly located on the Holme structural high, was present underneath the central Pennines. This platform is called the Holme Platform. The Arundian to early Asbian section of the Alport Borehole represents deposition of resedimented shallow-water carbonates with occasional bioturbated periplatform carbonates and basinal shales on the middle part of a carbonate ramp. Volcaniclastic sediments may have been derived from a volcanic centre within the Edale Basin. A change in sedimentation during the mid-Asbian to the deposition of basinal shales and distal carbonate turbidites is attributed to starvation of the basin. This may have been caused by a combination of the development of accretionary rimmed carbonate shelves and the repeated emergence of shelf carbonates deposited on surrounding carbonate platforms. The late Asbian/early Brigantian section of the Edale Borehole is interpreted as a distal equivalent of the ‘Beach Beds’ which outcrop at the north margin of the Derbyshire carbonate platform. The ‘Beach Beds’ represent bioclastic turbidites derived from the Derbyshire carbonate platform. Throughout the Brigantian, sedimentation in the Edale Basin was dominated by the deposition of distal carbonate turbidites and basinal shales. Variation of dip through the Alport Borehole indicates the common occurrence of slumps throughout the sequence and the presence of either an angular unconformity or a fault within the early Brigantian section.