Subfossil oribatid mite communities indicate Holocene permafrost dynamics in Canadian mires

Permafrost thaw in peatlands is one of the most widespread and worrying consequences of climate warming in the sub-Arctic area. To predict future climate feedbacks, it is important to study the history of permafrost aggradation and thaw. Plant macrofossil analysis with radiocarbon dating has been widely used in detecting past permafrost dynamics in peatlands, however, due to a lack of permafrost-specific plant indicator species, determining the exact timing of permafrost aggradation remains a challenge. In this study, we investigated if oribatid mites can be used to determine Holocene permafrost aggradation and degradation in Canadian mires. Based on analyses of subfossil oribatid mite assemblages of Holocene peat profiles from two mires in the Hudson Bay Lowlands area, our results suggest that two species, Carabodes labyrinthicus and Neoribates aurantiacus, are useful bioindicators, which can be used in palaeoecological studies determining permafrost histories. Moreover, our results show that subfossil oribatid mite remains can reveal periods of permafrost, which cannot be determined with certainty based on plant macrofossils alone.     

Where Am I? Investigating Map Matching During Self‐Localization With Mobile Eye Tracking in an Urban Environment

Self‐localization is the process of identifying one's current position on a map, and it is a crucial part of any wayfinding process. During self‐localization the wayfinder matches visually perceptible features of the environment, such as landmarks, with map symbols to constrain potential locations on the map. The success of this visual matching process constitutes an important factor for the success of self‐localization. In this research we aim at observing the visual matching process between environment and map during self‐localization with real‐world mobile eye tracking. We report on one orientation and one self‐localization experiment, both in an outdoor urban environment. The gaze data collected during the experiments show that successful participants put significantly more visual attention to those symbols on the map that were helpful in the given situation than unsuccessful participants. A sequence analysis revealed that they also had significantly more switches of visual attention between map symbols and their corresponding landmarks in the environment, which suggests they were following a more effective self‐localization strategy.     

The frequency of window damage caused by bolide airbursts: A quarter century case study

We have empirically estimated how often fireball shocks produce overpressure (∆P) at the ground sufficient to damage windows. Our study used a numerical entry model to estimate the energy deposition and shock production for a suite of 23 energetic fireballs reported by U.S. Government sensors over the last quarter century. For each of these events, we estimated the peak ∆P on the ground and the ground area above ∆P thresholds of 200 and 500 Pa where light and heavy window damage, respectively, are expected. Our results suggest that at the highest ∆P, it is the rare, large fireballs (such as the Chelyabinsk fireball) which dominate the long-term areal ground footprints for heavy window damage. The height at the fireball peak brightness and the fireball entry angle contribute to the variance in ground ∆P, with lower heights and shallower angles producing larger ground footprints and more potential damage. The effective threshold energy for fireballs to produce heavy window damage is ~5–10 kT; such fireballs occur globally once every 1–2 years. These largest annual bolide events, should they occur over a major urban center with large numbers of windows, can be expected to produce economically significant window damage. However, the mean frequency of heavy window damage (∆P above 500 Pa) from fireball shock waves occurring over urban areas is estimated to be approximately once every 5000 yr. Light window damage (∆P above 200 Pa) is expected every ~600 yr.     

Palaeosurfaces in central West Greenland as reference for identification of tectonic movements and estimation of erosion

Landform analysis of basement rocks has been undertaken with the aid of digital elevation data, aerial photographs and field observations in central West Greenland (69°15′N–66°00′N). Palaeosurfaces have been identified, dated relatively to each other, used to quantify uplift and fault movements and also used to estimate differential erosion. Two types of palaeosurfaces were mapped across the Precambrian basement: a surface at low elevation with distinct hills (hilly relief), and two planation surfaces formed across different types of basement rocks. The hilly relief surface emerges as an inclined surface from Cretaceous cover rocks in Disko Bugt and is interpreted as a stripped late Mesozoic etch surface. This surface is cut off towards the south by a less inclined planation surface, which is younger and thus of Cenozoic age. It is similar to the post-Eocene (Miocene?) planation surfaces identified on Disko and Nuussuaq in other studies. The planation surface splits in two southwards towards high areas around Nordre Isortoq and Sukkertoppen Ice Cap. The upper planation surface forms near-summit areas of tectonic blocks dipping in different directions and with different tilts. The uplift centres define the crests of two mega blocks, separated by the ‘Sisimiut Line’ which coincides with the Precambrian Ikertôq thrust zone. A partially developed lower planation surface indicates a first uplift of maximum 500 m followed by a second uplift of maximum 1000 m. We infer that these uplift events occurred during the late Neogene based on correlation with similar surfaces on Nuussuaq and the timing of exhumational events estimated from apatite fission track analyses of samples from a deep borehole on Nuussuaq (reported elsewhere). The difference between a reconstruction of the upper planation surface across the entire area and the present topography was used as an estimate of erosion of basement rock since the formation of the upper planation surface. The erosion is unevenly distributed and varies from almost none on the well-preserved planation surfaces to 800–1300 m along valleys, and even more in the fjords. Erosion is less within areas of gneiss in granulite facies, than in areas of gneiss in amphibolite facies.     

Intercomparison of Stratospheric Chemistry Models under Polar Vortex Conditions

Several stratospheric chemistry modules from box, 2-D or 3-D models, have been intercompared. The intercomparison was focused on the ozone loss and associated reactive species under the conditions found in the cold, wintertime Arctic and Antarctic vortices. Comparisons of both gas phase and heterogeneous chemistry modules show excellent agreement between the models under constrained conditions for photolysis and the microphysics of polar stratospheric clouds. While the mean integral ozone loss ranges from 4–80% for different 30–50 days long air parcel trajectories, the mean scatter of model results around these values is only about ±1.5%. In a case study, where the models employed their standard photolysis and microphysical schemes, the variation around the mean percentage ozone loss increases to about ±7%. This increased scatter of model results is mainly due to the different treatment of the PSC microphysics and heterogeneous chemistry in the models, whereby the most unrealistic assumptions about PSC processes consequently lead to the least representative ozone chemistry. Furthermore, for this case study the model results for the ozone mixing ratios at different altitudes were compared with a measured ozone profile to investigate the extent to which models reproduce the stratospheric ozone losses. It was found that mainly in the height range of strong ozone depletion all models underestimate the ozone loss by about a factor of two. This finding corroborates earlier studies and implies a general deficiency in our understanding of the stratospheric ozone loss chemistry rather than a specific problem related to a particular model simulation.     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

GGR Critical Review of Analytical Developments in 2004–2005

In 2005 Geostandards and Geoanalytical Research embarked upon a new initiative for its readers. Key researchers in various fields of geoanalytical technique development and their application were identified and invited to provide reviews pertinent to their expertise. As noted in the first of these publications "…instead of revisiting the historical context or decades of development in each analytical technique, the goal here has been to capture a snapshot of "hot topics" across a range of fields as represented in the… literature" (Hergt et al . 2005). Rather than prepare an annual review, a decision was taken earlier this year to provide a biennial summary of progress and accomplishments, in this case for the years 2004–2005. The principal techniques employed in Earth and environmental sciences are covered here, and include laser ablation and multicollector ICP-MS, ICP-AES, thermal ionisation and secondary ion mass spectrometry, as well as neutron activation analysis, X-ray fluorescence and atomic absorption spectrometry. A comprehensive review of the development of reference materials, often essential to these techniques, is also provided. The contributions assembled serve both to keep readers informed of advances they may be unfamiliar with, but also as a means of showcasing examples of the breadth and depth of work being conducted in these fields.     

WWATCH模式模拟南海海浪场的结果分析

利用美国NOAA/NCEP环境模拟中心海洋模拟小组近年新开发的一个准业务化的海浪数值模式WAVEWATCH Ⅲ(以下简称WWATCH),以每天4次的NOAA/NCEP再分析风场资料为输入,模拟了1996年的南海海域的海面风浪场,通过分析TOPEX/Poseidon(以下简称T/P)高度计的上升和下降轨道在南海海域的交叉点位置处的风、浪观测资料与NCEP风场和WWATCH模式模拟的有效波高大小,可以看出,NCEP风场基本与T/P高度计的风速观测结果一致,相应的模式模拟的有效波高也基本与卫星高度计的有效波高观测结果相一致,但从空间上看,在计算区域中心附近海域的结果一致性较好,靠近计算边界附近海域的结果相对较差,但这种因边界而影响模拟结果的范围很有限;从时间上看,冬季风期间的结果一致性较好,而夏季风期间的结果偏小的趋势明显,并且这种偏小主要出现在夏季风期间的极小风速值附近。     

The meso-scale drivers of temperature extremes in high-latitude Fennoscandia

Extreme temperatures are key drivers controlling both biotic and abiotic processes, and may be strongly modified by topography and land cover. We modelled mean and extreme temperatures in northern Fennoscandia by combining digital elevation and land cover data with climate observations from northern Finland, Norway and Sweden. Multivariate partitioning technique was utilized to investigate the relative importance of environmental variables for the variation of the three temperature parameters: mean annual absolute minima and maxima, and mean annual temperature. Generalized additive modeling showed good performance, explaining 84–95 % of the temperature variation. The inclusion of remotely sensed variables improved significantly the modelling of thermal extremes in this system. The water cover variables and topography were the most important drivers of minimum temperatures, whereas elevation was the most important factor controlling maximum temperatures. The spatial variability of mean temperatures was clearly driven by geographical location and the effects of topography. Partitioning technique gave novel insights into temperature-environment relationship at the meso-scale and thus proved to be useful tool for the study of the extreme temperatures in the high-latitude setting.