The alleged kimberlite-carbonatite relationship: evidence from ilmenite and spinel from Premier and Wesselton mines and the Benfontein sill,South Africa

Carbonate-rich, SiO₂-poor residua are developed in some kimberlites solidifying as ocelli, layers, or discrete dikes which satisfy petrographic definitions of carbonatite. Arguments that these rocks have mineralogies, antecedents, and comagmatic rocks differing from those of the carbonatites in alkaline rock complexes, including the specific observation that kimberlites and carbonatites contain ilmenites and spinels of different composition, have been used to refute the alleged kimberlite-carbonatite relationship. New microprobe analyses of ilmenites and spinels from carbonate-rich rocks associated with kimberlites in three South African localities correspond to spinels and ilmenites of carbonatites from alkalic complexes, or have characteristics intermediate between those of carbonatites and kimberlites. The ilmenites are distinguished from kimberlite ilmenites by higher MnO, FeTiO₃, and Nb₂O₅, and by negligible Cr₂O₃. The spinels are distinguished from kimberlite spinels by their Al₂O₃ and Cr₂O₃ contents. There is clearly a genetic relationship between the kimberlites and the carbonate-rich rocks, despite the observation that their ilmenites and spinels are distinctly different, which indicates that the same observation is not a valid argument against a petrogenetic relationship between kimberlites and carbonatites. These rocks are among the diverse products from mantle processes influenced by CO₂, and we believe that the petrogenetic links among them are forged in the upper mantle. We see insufficient justification to deny the name carbonatite to carbonate-rich rocks associated with kimberlites if they satisfy the petrographic definition in terms of major mineralogy.     

Tectonic and magmatic ridges in the eltanin fault system,South Pacific

A Seabeam reconnaissance of the 400 km-long fast-slipping (88 mm yr^-1) Heezen transform fault zone and the 55 km-long spreading center that links it to Tharp transform defined and bathymetrically described several types of ridges built by tectonic uplift and volcanic construction. Most prominent is an asymmetric transverse ridge, at which abyssal hills adjacent to the fault zone have been raised 2–3 km above normal rise-flank depths. Topographic and petrologic evidence suggests that this uplift, which has produced a 5400 m scarp from the crest of the ridge to the floor of a 10 km-wide transform valley, is caused by rapid serpentinization of upper mantle which has been exposed to hydrothermal circulation by fault-zone fracturing of an unusually thin crust. Transverse ridges have been thought atypical of fast-slipping transforms. One class of volcanic ridge more common at these sites is the overshot ridge, formed by prolongation of spreading-center rift zones obliquely across the transform. Overshot ridges are well developed at Heezen transform, especially at the eastern end where an eruptive rift zone extending 60 km from the southern tip of the East Pacific Rise has built a transform-parallel ridge that fills the eastern transform valley. Obliteration of fault-zone structure by ridges overshooting from the spreading center intersections means that the topography of the aseismic fracture zones is not just inherited from that of the active transform fault zone. The latter has several en echelon and overlapping fault traces, linked by short oblique spreading axes that generally form pull-apart basins rather than volcanic ridges. Interpretation of the origin and pattern of the fault zone's tectonic and volcanic relief requires refinement of the plate geography and history of this part of the Pacific-Antarctic boundary, using new Seabeam and magnetic traverses to supplement and adjust the existing geophysical data base.     

Basement imaging with Side-Looking Seismics

The multistreamer Side-Looking Seismic system presented in this paper makes a sonograph of uncovered or buried crustal topography, thus revealing the structural fabric of the oceanic basement, even when this is covered with a sedimentary layer. Major elements of the system are an airgun as a sound source, five single-channel parallel streamers and two minicomputers for signal capture and processing.The system is used simultaneously for enhanced single-channel seismic profiling and for side-looking seismics. A vertical section with an improved signal-to-noise ratio and a suppression of side-echoes is produced on a digital seismic recorder. Primary side-looking seismic output in the form of 5 profiles with different angles of incidence is obtained within 10 seconds. This part of the processing can be done in real time.In sediment-covered areas the low frequencies used cause the slanted profiles (the side beams in the primary output) to be side-looking sonar images of buried topography. The projection process yielding final side-looking output corrects for slant range deformation caused by the water column and, if necessary, for deformation caused by refraction within the sedimentary column. The result approaches a conformal map of the structure of the traversed basement. Swath width is mainly determined by water depth and refraction effects in the sediment. In Madeira abyssal plain a swath width of 8000 m was attained in a water depth of 5000 m.Within the swath, oceanic basement structures are recognized in the form of elongate more or less parallel reflectors. They are interpreted as buried spreading topography. The lack of side-echoes within fracture zones combined with typical wall signatures can be used to trace fracture zones. These features are demonstrated for an area in Madeira abyssal plain.     

The Southern Antarctic Circumpolar Current Front: physical and biological coupling at South Georgia

The coupling of physics and biology was examined along a 160 km long transect running out from the north coast of South Georgia Island and crossing the Southern Antarctic Circumpolar Current Front (SACCF) during late December 2000. Surface and near surface potential TS properties indicated the presence of three water types: a near-shore group of stations characterised by water which became progressively warmer and fresher closer to South Georgia, an offshore grouping in which sea surface temperatures and those at the winter water level were relatively warm (1.8°C and 0.5°C, respectively), and a third in which surface and winter water temperatures were cooler and reflected the presence of the SACCF. The transect bisected the SACCF twice, revealing that it was flowing in opposite directions, north-westward closest to South Georgia and south-eastwards at its furthest point from the island. The innermost limb was a narrow intense feature located just off the shelf break in 2000–3500 m of water and in which rapid surface baroclinic velocities (up to 35 cm s⁻¹) were encountered. Offshore in the outermost limb, shown subsequently to be a mesoscale eddy that had meandered south from the retroflected limb of the SACCF, flow was broader and slower with peak velocities around 20 cm s⁻¹. Chlorophyll a biomass was generally low (<1 mg m⁻³) over much of the transect but increased dramatically in the region of the innermost limb of the SACCF, where a deepening of the surface mixed layer was coincident with a subsurface chlorophyll maximum (7.4 mg m⁻³) and elevated concentrations down to 100 m. The bloom was coincident with depleted nutrient concentrations, particularly silicate, nitrate and phosphate, and although ammonium concentrations were locally depleted the bloom lay within an elevated band (up to 1.5 mmol m⁻³) associated with the frontal jet. Increased zooplankton abundance, higher copepod body carbon mass and egg production rates all showed a strong spatial integrity with the front. The population structure of the copepods Calanoides acutus and Rhincalanus gigas at stations within the front suggested that rather than simply resulting from entrainment and concentration within the jet, increased copepod abundance was the result of development in situ. Estimates of bloom duration, based on silicate and carbon budget calculations, set the likely duration between 82 and 122 d, a figure supported by the development schedule of the two copepod species. Given this timescale, model outputs from FRAM and OCCAM indicated that particles that occurred on the north side of South Georgia in December would have been in the central-southern Scotia Sea 2–3 months earlier, probably in sea ice affected regions.     

Spatial variability in petrophysical properties in Upper Maastrichtian chalk outcrops at Stevns Klint, Denmark

The spatial variability of porosity and permeability was determined for a section in the uppermost Maastrichtian chalk exposed in the Sigerslev quarry at Stevns Klint. The aims were threefold: (1) to quantify the spatial variability pattern and its link to geology by applying systematic variogram analysis procedure, (2) to detect potential cyclicity in the petrophysical properties in this pure and overtly homogeneous chalk, and (3) to compare the section with chalk reservoirs in the North Sea in order to asses to what extent this onshore sequence has a potential as an analogue of the offshore, more deeply buried chalk reservoirs. The interval is of comparable stratigraphic age to the uppermost reservoir zones in the Tor Formation of the North Sea chalk reservoirs. The variability and spatial correlation of porosity and permeability in both horizontal and vertical directions are interpreted in a geological context and show indications of small-scale heterogeneity at 15–25 cm scale, but the clear cyclic layering described from other chalk deposits is not recognised at this locality. The investigated outcrop is not a close analogue to North Sea reservoir chalk, but some aspects are common including basic material properties, porosity/permeability trends and the variability pattern. The outcrop has a potential as analogue for some of the onshore subsurface chalk successions at shallow burial depth that form important aquifers.     

Reproductive life history stages sensitive to oil and naphthalene in Atlantic croaker

The reproductive effects of chronic exposure to water-soluble fractions (WSF) of diesel fuel oil and naphthalene in female Atlantic croaker during critical periods of their reproductive life history were investigated. Fish were repeatedly exposed to WSF of oil (2.5 or 5%) or naphthalene (0.5 or 1.0 ppm) for 5 or 8 weeks. Both pollutants blocked sexual maturation in some fish and impaired ovarian recrudescence in others. The majority of the oocytes in exposed fish were undeveloped and widespread oocyte atresia was evident at higher concentrations of these polycyclic aromatic hydrocarbons (PAH). The disruption of ovarian growth and oocyte development in croaker after PAH exposure was associated with alterations in reproductive endocrine function at multiple sites on the hypothalamus-pituitarygonadal axis. A third period of increased sensitivity to xenobiotics was observed during final oocyte maturation.     

Trace metal composition of colloidal organic material in marine environments

Marine colloidal material (1 kDa–0.2 μm) was isolated by cross-flow ultrafiltration followed by diafiltration and freeze-drying from surface waters of the Gulf of Mexico and the Middle Atlantic Bight (MAB), as well as from estuarine waters of Galveston Bay. Elemental characterization of isolated colloidal material included organic carbon (OC) and selected trace metal (Cu, Pb, Zn, Cd, Co, Ni, Cr, Be, Fe, Al, Mn, V, Ba, and Ti) determinations. It was found that levels of these metals in marine colloids ranged from <0.1 to 50 μg/g colloidal matter, except for Fe which generally had a concentration >120 μg/g. Most metals (Cu, Pb, Zn, Ni, Al, Mn, V, and Ti) had an average concentration >1 μg/g while concentrations of Cd, Co and Be were usually <1 μg/g. Metal concentrations (μg/g) in isolated colloids were, in general, higher in Galveston Bay than in the Gulf of Mexico, suggesting either high abundance of trace metals in estuarine waters or differences in organic matter composition. Higher colloidal metal concentrations in the MAB than in the Gulf of Mexico might be due to higher terrestrial inputs in the MAB. Colloidal metal concentrations (μg/g) were generally lower than those in average soils, continental crust and suspended particles. However, metal/aluminum ratios (Me/Al) in isolated marine colloids were significantly higher than those for average soils and continental crust. Most importantly, colloids had a metal composition and metal/OC ratio (Me/C) similar to humic substances and marine plankton, suggesting that marine colloids largely originate from planktonic sources and are composed of predominately organic components. The Me/C ratios of Galveston Bay colloids followed the sequence of Cu>Ni, Cr, Zn>Mn>Co>Pb, Cd, which is similar to the Irving–Williams order except for Mn, suggesting that the interaction of metals with marine colloids is determined by the affinity of metals for specific organic ligands.     

Observations of the Labrador Sea eddy field

This paper is an observational study of small-scale coherent eddies in the Labrador Sea, a region of dense water formation thought to be of considerable importance to the North Atlantic overturning circulation. Numerical studies of deep convection emphasize coherent eddies as a mechanism for the lateral transport of heat, yet their small size has hindered observational progress. A large part of this paper is therefore devoted to developing new methods for identifying and describing coherent eddies in two observational platforms, current meter moorings and satellite altimetry. Details of the current and water mass structure of individual eddy events, as they are swept past by an advecting flow, can then be extracted from the mooring data. A transition is seen during mid-1997, with long-lived boundary current eddies dominating the central Labrador Sea year-round after this time, and convectively formed eddies similar to those seen in deep convection modeling studies apparent prior to this time. The TOPEX / Poseidon altimeter covers the Labrador Sea with a loose “net” of observations, through which coherent eddies can seem to appear and disappear. By concentrating on locating and describing anomalous events in individual altimeter tracks, a portrait of the spatial and temporal variability of the underlying eddy field can be constructed. The altimeter results reveal an annual “pulsation” of energy and of coherent eddies originating during the late fall at a particular location in the boundary current, pinpointing the time and place of the boundary current-type eddy formation. The interannual variability seen at the mooring is reproduced, but the mooring site is found to be within a localized region of greatly enhanced eddy activity. Notably lacking in both the annual cycle and interannual variability is a clear relationship between the eddies or eddy energy and the intensity of wintertime cooling. These eddy observations, as well as hydrographic evidence, suggest an active role for boundary current dynamics in shaping the energetics and water mass properties of the interior region.     

Bioavailability: the organism as sensor

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.