The New SCIAMACHY Reference Solar Spectral Irradiance and Its Validation

This paper describes a new reference solar spectrum retrieved from measurements of the satellite instrument SCIAMACHY in the wavelength region from \(0.24~\upmu\mbox{m}\) to \(2.4~\upmu\mbox{m}\) and its comparison with several other established solar reference spectra. The SCIAMACHY reference spectrum was recorded early in the mission before substantial optical degradation due to the harsh space environment sets in. The radiometric calibration of SCIAMACHY, applied in this study, includes a physical model of the scanner unit. Furthermore, SCIAMACHY’s internal white light source (WLS) is used to correct for on-ground to in-flight changes. The resultant calibrated solar spectrum from SCIAMACHY is in good agreement with several available solar spectral irradiance (SSI) references in the visible spectral range. Strong throughput losses due to detector icing in the near infrared (NIR) are now adequately accounted for. Nevertheless, a deficit with respect to the ATLAS-3 composite and SORCE/SIM SSI is observed in the NIR. However, the SCIAMACHY solar reference spectrum agrees well with the recently re-evaluated SOLAR/SOLSPEC-ISS and recent ground measurements taken at Mauna Loa in the NIR.     

A New Solar Spectrum from 656 to 3088 nm

The solar spectrum is a key parameter for different scientific disciplines such as solar physics, climate research, and atmospheric physics. The SOLar SPECtrometer (SOLSPEC) instrument of the Solar Monitoring Observatory (SOLAR) payload onboard the International Space Station (ISS) has been built to measure the solar spectral irradiance (SSI) from 165 to 3088 nm with high accuracy. To cover the full wavelength range, three double-monochromators with concave gratings are used. We present here a thorough analysis of the data from the third channel/double-monochromator, which covers the spectral range between 656 and 3088 nm. A new reference solar spectrum is therefore obtained in this mainly infrared wavelength range (656 to 3088 nm); it uses an absolute preflight calibration performed with the blackbody of the Physikalisch-Technische Bundesanstalt (PTB). An improved correction of temperature effects is also applied to the measurements using in-flight housekeeping temperature data of the instrument. The new solar spectrum (SOLAR–IR) is in good agreement with the ATmospheric Laboratory for Applications and Science (ATLAS?3) reference solar spectrum from 656 nm to about 1600 nm. However, above 1600 nm, it agrees better with solar reconstruction models than with spacecraft measurements. The new SOLAR/SOLSPEC measurement of solar spectral irradiance at about 1600 nm, corresponding to the minimum opacity of the solar photosphere, is 248.08 ± 4.98 mW?m^?2?nm^?1 (1?\(\sigma\)), which is higher than recent ground-based evaluations.     

Strategies to Make Methods Based on Flow Injection Analysis Greener

The implementation of flow injection analysis (FIA) systems and correlated techniques in the laboratory routine provides an increase of analytical throughput and the reduction of risks of analyte losses and contamination. Naturally, it contributes to the reduction of reagent consumption and minimization of waste generation. This paper presents and discusses an overview of the main strategies adopted to make methods based on FIA systems more environmentally friendly, and offers a review of these methods that covers the period from January 2002 to December 2019. Strategies based on reagent management (adoption of procedures without reagents, replacement of toxic reagents, recycling and reuse of reagents and, use of immobilized reagents), the online waste treatment, and the improvements of FIA systems (flow system configurations that avoid reagent wastage, use of green detectors, automation, and miniaturization) are approached in this perspective.     

Wave observations from an array of directional buoys over the southern Brazilian coast

It is well known that the majority of buoy measurements are located around the US coast and along some Europeans countries. The lack of long-term and densely spaced in situ measurements in the Southern Hemisphere in general, and the South Atlantic in particular, hinders several investigations due to the lack of detailed metocean information. Here, we present an effort to overcome this limitation, with a dense network of buoys along the Brazilian coast, equipped with several meteorological and oceanographic sensors. Out of ten currently operational buoys, three are employed to present the main characteristics of waves in the Southern part of the network. For the first time, sensor characteristics and settings are described, as well as the methods applied to the raw wave data. Statistics and distributions of wave parameters, swell propagating events, comparison with a numerical model and altimeters and a discussion about the occurrence of freak waves are presented.     

Granulometric selectivity in Liza ramado and potential contamination resulting from heavy metal load in feeding areas

The stomach contents of thin-lipped grey mullets Liza ramado were analysed in terms of granulometric composition and compared to the sediment of potential feeding areas in the Tagus estuary. Total organic matter (TOM) content and heavy metal content were determined in the surface sediment of three areas and eight trace elements were quantified: Cd, Co, Cr, Cu, Hg, Ni, Pb and Zn. The three sampled areas did not differ in TOM; and the heavy metal content was below Effects Range-Low level for most elements. The mean observed concentrations were present in the following sequence: Zn > Pb > Cr > Cu ≈ Ni > Co > Cd > Hg. Stomach contents granulometric composition provided information about the feeding selectivity of the mullets. Sediment fractions with particle size between 20 and 50 μm are preferred, independently of the fishes' length. Smaller standard length (SL) fishes have a higher positive selection of fine grained sediments than those with a larger SL. Finer fractions usually have higher concentration of heavy metals, which makes younger specimens of the thin-lipped grey mullet potentially more exposed to heavy metal load in the estuary. Metal concentration was not independent from the sampling point, presenting higher values near the margins and the estuary tidal drainage system. This means that during the first period of each tidal cycle, the mullets will feed first on the most contaminated areas, as a consequence of their movement following the rising tide to feed on previously exposed areas.     

Inputs of organic carbon from Ria de Aveiro coastal lagoon to the Atlantic Ocean

Land/ocean boundaries constitute complex systems with active physical and biogeochemical processes that affect the global carbon cycle. An example of such a system is the mesotidal lagoon named Ria de Aveiro (Portugal, 40°38′N, 08°45′W), which is connected to the Atlantic Ocean by a single channel, 350 m wide. The objective of this study was to estimate the seasonal and inter-tidal variability of organic carbon fluxes between the coastal lagoon and the Ocean, and to assess the contribution of the organic carbon fractions (i.e. dissolved organic carbon (DOC) and particulate organic carbon (POC)) to the export of organic carbon to the Ria de Aveiro plume zone. The organic carbon fractions fluxes were estimated as the product of the appropriate fractional organic carbon concentrations and the water fluxes calculated by a two-dimensional vertically integrated hydrodynamic model (2DH). Results showed that the higher exchanges of DOC and POC fractions at the system cross-section occurred during spring tides but only resulted in a net export of organic carbon in winter, totalling 85 t per tidal cycle. Derived from the winter and summer campaigns, the annual carbon mass balance estimated corresponded to a net export of organic carbon (7957 = 6585 t yr⁻¹ POC + 1372 t yr⁻¹ DOC). On the basis of the spring tidal drainage area, it corresponds to an annual flux of 79 g m⁻² of POC and 17 g m⁻² of DOC out of the estuary.     

Structural evolution of rutile-type and CaCl2-type germanium dioxide at high pressure

 Germanium dioxide was found to undergo a transition from the tetragonal rutile-type to the orthorhombic CaCl₂-type phase above 25 GPa. The detailed structural evolution of both phases at high pressure in a diamond anvil cell has been investigated by Rietveld refinement using angle-dispersive, X-ray powder-diffraction data. The square of the spontaneous strain (a−b)/(a+b) in the orthorhombic phase was found to be a linear function of pressure and no discontinuities in the cell constants and volume were observed, indicating that the transition is second-order and proper ferroelastic. Compression of the GeO₆ octahedra was found to be anisotropic, with the apical Ge-O distances decreasing to a greater extent than the equatorial distances and becoming shorter than the latter above 7 GPa. Above this pressure, the GeO₆ octahedron exhibits the common type of tetragonal distortion predicted by a simple ionic model and observed for most rutile-type structures such as those of the heavier group-14 dioxides and the metal difluorides. Above the phase transition, the columns of edge-sharing octahedra tilt about their two fold axes parallel to c and the rotation angle reaches 10.2(5)° by 36(1) GPa so as to yield a hexagonal close-packed oxygen sublattice. The compressibility increases at the phase change as is expected for a second-order transition at which an additional compression mechanism becomes available.     

Thermal history of inter-cluster relativistic electron gas heated by quasars

The thermal evolution of an inter-cluster gas of relativistic electrons heated by quasars with redshifts up toz=3 and 4 is studied in the framework of a Friedmann-Robertson-Walker universe. The gas cools by Compton scattering with the microwave backgroud radiation and by adiabatic cooling due to the universe expansion. Power and exponential laws of cosmological evolution of the comoving density of sources are considered. The obtained temperatures are sensitive to the form of these laws and to the heating epochs. Compared to the nonrelativistic models, the results obtained in the case of the power law present strong differences. These differences decrease when the exponential law is considered. Thermalization times are compared to the characteristic time of variation of the universe energy density and to the time-scales of energy loss by bremsstrahlung radiation and by Compton scattering. It is shown that, in some cases, nonequilibrium effects may be important. The time delay effects in the propagation of electromagnetic waves in cosmic plasma are shown to be very important for the analysis of theoretical models.     

Nature and origin of the BIF-hosted São Bento gold deposit, Quadrilátero Ferrífero, Brazil, with special emphasis on structural controls

The orogenic banded iron formation (BIF)-hosted Au mineralization at São Bento is a structurally-controlled, hydrothermal deposit hosted by Archean rocks of the Rio das Velhas greenstone belt, Quadrilátero Ferrífero region, Brazil. The deposit has reserves of 14.3 t Au and historical (underground) production of 44.6 t Au between 1987 and 2001. The oxide-facies São Bento BIF is mineralized at its lower portion, where in contact with carbonaceous, pelitic schists, particularly in the proximity of sulfide-bearing quartz veins. Shear-related Au deposition is associated with the pervasive, hydrothermal sulfidation (mainly arsenopyrite) of the Fe-rich bands of the São Bento BIF. Auriferous, sulfide- and quartz-rich zones represent proximal alteration zones. They are enveloped by ankerite-dominated haloes, which reflect progressive substitution of siderite and magnetite within the BIF by ankerite and pyrrhotite, respectively. The São Bento BIF was intensely and extensively deformed, first into open, upright folds that evolved into tight, asymmetric, isoclinal folds. The inverse limb of these folds attenuated and gave way to sheath folds and the establishment of ductile thrusts. Mineralized horizons at São Bento result from early structural modifications imposed by major transcurrent and thrusts faults, comprising the Conceição, Barão de Cocais and São Bento shear zones. Dextral movement on the SW–NE-directed Conceição shear zone may have generated splays at a compressional side-stepping zone, such as the São Bento shear zone, which is the structural locus for the São Bento gold mineralization. Relaxation of the Conceição shear zone under more brittle conditions resulted in the development of dilatational zones where gold–sulfide–quartz veins formed. These structures are considered to have been generated in the Archean. Geochronological data are scarce, with Pb–Pb analyses of refractory arsenopyrite and pyrite from bedded and remobilized ore plotting on a single-stage growth curve at 2.65 Ga. A later compressional, ductile deformation of unknown age overprinted, rotated and flattened the original, N60E-directed structure of the whole rock succession, with development of planar and linear fabrics that appear similar to Proterozoic-aged structures. Fluid inclusion studies indicate low salinity, aqueous fluids, with or without CO₂ and/or CH₄, with extremely variable CO₂/CH₄ ratios, of probable metamorphic origin. Fluid evolution shows a paragenetic decrease in the carbonic phase from 10–15% to 5%, and increase in the H₂O/(CO₂ + CH₄) and CO₂/CH₄ ratios, suggesting important interaction with carbonaceous sediment. Trapping conditions indicate a temperature of 300 °C at 3.2 kbar.