Application of the Single-Bubble Airgun Technique for OBS-Data Acquisition Across the Jan Mayen Ridge,North Atlantic

A 140 km long wide-angle seismic profile has been acquired by use of 6 Ocean Bottom Seismographs across the Jan Mayen Ridge, North Atlantic. The profile was acquired twice; once with a traditionally tuned standard source and secondly with a somewhat smaller source tuned on the first bubble pulse. Analysis of the frequency content of the data reveals that the single-bubble source within the 10-15 Hz frequency range generates a signal with a level about 5 db above that of the standard source. These differences can partly be related to differences in airgun depth. The higher output level for these frequencies enables the single-bubble source to resolve intra-crustal structures with a higher degree of certainty, when compared to the data acquired by use of the standard source array. The standard source seems to generate slightly more energy for frequencies around 6 Hz, probably due to the use of a large 1200 in/sup3 gun in this array. These low frequencies a re of importance for mapping of lower crustal and upper mantle structures, and it is recommended that this is taken into account when seismic sources for mapping of deep crustal and upper mantle structures are designed.     

Improving the Coastal Mean Dynamic Topography by Geodetic Combination of Tide Gauge and Satellite Altimetry

Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.     

Size distribution of colloidal trace metals and organic carbon during a coastal bloom in the Baltic Sea

The physico-chemical speciation of organic carbon and selected metals was measured during a coastal bloom in Ekhagen Bay, Baltic Sea, using ultrafiltration.One important objective with the study was to see if any depletion of trace metals could be measured in the directly bioavailable fraction (<1000 Da, the soluble low molecular weight fraction, LMW) during a plankton bloom. Filters with five different cut-offs were used (1 kD (1000 Da), 5 kD, 10 kD, 100 kD and 0.22 μm) in order to delineate the size distribution of colloidal organic carbon (COC) and trace metals.During the bloom in May, LMW Al, Co, Cu, Mn and Ni concentrations decreased although the colloidal and particulate concentrations were relatively high. Data show that desorption of colloidal and particulate bound trace metals to the LMW fraction was slower than the process depleting the LMW fraction.Estimates of the maximum active uptake of Cu, Ni and Mn by the phytoplankton, and the loss of non-bioactive Al from the LMW fraction, indicate that processes other than active uptake by phytoplankton must contribute to the observed depletion of trace metals in the LMW fraction. Hence, in order to estimate the bioavailable pool of trace metals for plankton during bloom conditions, these other processes must be understood and quantified.Transparent Exopolymeric Particles (TEP, reflecting sugar-rich phytoplankton exudates) increased around eight times during the plankton bloom. We hypothesize that the formation of TEP is a process that might be important for the transfer of trace metals from the LMW to the particulate fraction during the phytoplankton bloom, but the significance of TEP for this depletion in Baltic Sea surface water remains to be shown.     

Die nordschwedischen Eisenerze und verwandte Lagerstätten als Beispiele eruptiver Spaltungsprozesse

Zusammenfassung Seit einem früheren Stadium der geologischen Erforschung der nordschwedischen Eisenerzlagerstätten vom Typus Kiruna — meistens apatitreiche Magnetiterze — war es den damit beschäftigten Forschern klar, daß die Substanz der Erze im magmatischen Stadium von dem Magma der begleitenden Porphyrgesteine abgespaltet wurde. Die Natur und die Ursachen dieses Abspaltens müssen nach dem geologischen Befund beurteilt werden, denn es handelt sich um spätmagmatische Ereignisse in einem experimentell noch nicht erforschbaren Gebiet. Mineralparagenese, Struktur, Kontaktverhältnisse usw. deuten auf Kristallisation aus einem an leichtflüchtigen Gemengteilen reichen Magma (pneumotektische Gebilde). Der spätmagmatische oder restmagmatische Charakter der Erzbildung wird auch durch Übergänge nach Erztypen, die bei niedrigeren Temperaturen gebildet sind, klargelegt. Die Trennung zwischen Erz und Gestein erscheint ebenso scharf wie in den Fällen, in denen erzbildende Lösungen gasförmig abgeschieden worden sind. Die Abscheidung muß auch bei den hier behandelten spätmagmatischen Erzen auf die Wirkung der leichtflüchtigen Gemengteile (Magmagase) zurückgeführt werden. Genetisch verwandt sind sulfidische Erze, deren Anknüpfung an den Kirunatypus aus ihrem Apatit- und Magnetitgehalt hervorgeht, und die sich entweder aus pneumotektischen Magmen oder aus gasförmigen Lösungen kristallisierten. Mehr entfernt von der magmatischen Kristallisation folgen gewisse metasomatische Erze ähnlicher Zusammensetzung. Eigentümlicherweise zeigen aber die kontaktmetasomatischen Eisenerze in Kalkstein eine wesentlich andere Zusammensetzung der aus dem Magma stammenden Gemengteile, obgleich auch ihr Material aus dem Magma in Gasform entwich. Besonders auffallend ist der hohe Kieselsäuregehalt und die Seltenheit des Apatits. Diese Eigenschaften findet man auch in den Lagerstätten von diesem Typus, die in demselben Gebiet wie die Kiruna-Erze auftreten, und die mit den dortigen Tiefengesteinen verbunden sind.     

Probable causes for cyanobacterial expansion in the Baltic Sea: Role of anoxia and phosphorus retention

This study corroborates the hypothesis that nitrogen-fixing cyanobacteria have probably occurred as an important component of the phytoplankton community in the Baltic Sea at least since brackish water conditions were initiated 8,500¹⁴C yr BP. Pigment analyses indicate that extensive occurrences started prior to a sharp increase in nutrient levels dated to 7,100¹⁴C yr BP. The cyanobacteria could have functioned as a natural trigger for eutrophication in the Baltic Sea by importing nitrogen. This is also verified by a contemporaneous drop in the δ¹⁵N values from 4‰ to around 2‰. We further conclude that the spreading of cyanobacteria was probably caused by a decrease in nitrogen∶phosphorus (N∶P) in the water mass that resulted from the intrusion of oceanic water with high P levels. The fractionation of P in sediments indicated that iron-bound P was efficiently sequestered under anoxic conditions that occurred as a consequence of the establishment of a stable stratification caused by the marine intrusion. This pool only showed minor variations around 3 μmol g⁻¹ at the freshwater-brackish water transition. All P pools except the CaCO₃ fraction showed a distinct increase around 9,300¹⁴C yr BP prior to the transition. We interpreted this increase as a change in preservation of organic matter or in the source of the sediment. Slightly after 4,000¹⁴C yr BP there was a dramatic drop in all P pools without any corresponding decreases in total N and carbon. Total P decreased from around 75 to 25–30 μmol g⁻¹. The most dramatic drop occurred in the organic bound and the detrital apatite fractions, which decreased by a factor of 3–4. We explain this as a preferential regeneration of P, especially organic P, compared to other nutrients due to more prevalent anoxic conditions.     

Filamentary structures in planetary nebulae

We have studied small-scale, filamentary features in 14 planetary nebulae and found that some structures are recurrent and shaped like the letters V and Y, with the apex or stem pointing toward the central parts of the nebula. Two such filaments containing dust, one in NGC 3132 and one in NGC 7293, were investigated in more detail. The mass and density of the filaments were obtained from extinction measurements, and their physical properties were derived. We propose that the structures are confined by magnetic fields, and derive magnetic field strengths of about 10⁻⁸ T, in line with earlier estimates. We also estimate the magnitude of the electric currents that we expect are generated in these dynamic systems. We propose a theory where the magnetic fields control the sculpting and evolution of small-scale filaments. This theory demonstrates how the substructures may form magnetized flux ropes that are twisted around each other, in the shape of double helices. Similar structures, and with similar origin, are found in many other astrophysical environments.     

Towards a 4D topographic view of the Norwegian sea margin

The present-day topography/bathymetry of the Norwegian mainland and passive margin is a product of complex interactions between large-scale tectonomagmatic and climatic processes that can be traced back in time to the Late Silurian Caledonian Orogeny. The isostatic balance of the crust and lithosphere was clearly influenced by orogenic thickening during the Caledonian Orogeny, but was soon affected by post-orogenic collapse including overprinting of the mountain root, and was subsequently affected by a number of discrete extensional events eventually leading to continental break-up in Early Eocene time. In the mid-Jurassic the land areas experienced deep erosion in the warm and humid climate, forming a regional paleic surface. Rift episodes in the Late Jurassic and Early Cretaceous, with differential uplift along major fault zones, led to more pronounced topographic contrasts during the Cretaceous, and thick sequences of clastic sediments accumulated in the subsiding basins on the shelf. Following renewed extension in the Late Cretaceous, a new paleic surface developed in the Paleocene. Following break-up the margin has largely subsided thermally, but several Cenozoic shortening events have generated positive contraction structures. On the western side of the on-shore drainage divide, deeper erosion took place along pre-existing weakness zones, creating the template of the present day valleys and fjords. In the Neogene the mainland and large portions of the Barents Sea were uplifted. It appears that this uplift permitted ice caps to nucleate and accumulate during the Late Pliocene northern hemisphere climatic deterioration. The Late Pliocene to Pleistocene glacial erosion caused huge sediment aprons to be shed on to the Norwegian Sea and Barents Sea margins. Upon removal of the ice load the landmass adjusted isostatically, and this still continues today.