Analysis of limestone micromechanical properties by optical microscopy

Four dense Scandinavian limestones were analyzed to determine their mechanical properties. The generation of dust (? 10 μm) and fines (? 90 μm) during a closed circuit vertical roller mill comminution process was correlated with the calcite crystal size distributions of each limestone. Thin sections were analyzed and by means of stereology the calcite crystal size distributions for each limestone was measured. The dust generation of limestones is governed by a surface abrasive mechanism (R² = 0.99) and the production of fines is governed by the mechanical strength of limestones (R² = 0.99). The overall limestone degradation mechanism is predominantly controlled by the calcite cleavage planes which reduce the power consumption during the comminution process. This study is the first step in determining the influence of limestone texture on the wear rates in heterogenous raw mixes used in closed circuit comminution equipment.     

Characterisation of rock aggregate breakage properties using realistic texture‐based modelling

Realistic texture‐based modelling methods, that is microstructural modelling and micromechanical modelling, are developed to simulate the rock aggregate breakage properties on the basis of the rock actual microstructure obtained using microscopic observations and image analysis. The breakage properties of three types of rocks, that is Avja, LEP and Vandle taken from three quarries in Sweden, in single aggregate breakage tests and in inter‐aggregate breakage tests are then modelled using the proposed methods. The microstructural modelling directly integrates the microscopic observation, image analysis and numerical simulation together and provides a valuable tool to investigate the mechanical properties of rock aggregates on the basis of their microstructure properties. The micromechanical modelling takes the most important microstructure properties of rock aggregates into consideration and can model the major mechanical properties. Throughout this study, it is concluded that in general, the microstructure properties of rock aggregate work together to affect their mechanical properties, and it is difficult to correlate a single microstructure property with the mechanical properties of rock aggregates. In particular, for the three types of rock Avja, LEP and Vandle in this study, crack size distribution, grain size and grain perimeter (i.e. grain shape and spatial arrangement) show good correlations with the mechanical properties. The crack length and the grain size negatively affect the mechanical properties of Avja, LEP and Vandle, but the perimeter positively influences the mechanical properties. Besides, the modelled rock aggregate breakage properties in both single aggregate and inter‐aggregate tests reveal that the aggregate microstructure, aggregate shape and loading conditions influence the breakage process of rock aggregate in service. For the rock aggregate with the same microstructure, the quadratic shape and good packing dramatically improve its mechanical properties. During services, the aggregate is easiest to be fragmented under point‐to‐point loading condition, and then in the sequence of multiple‐point, point‐to‐plane and plane‐to‐plane loading conditions. Copyright © 2011 John Wiley & Sons, Ltd.     

Measuring ignitability for in situ burning of oil spills weathered under Arctic conditions: from laboratory studies to large-scale field experiments

This paper compares the ignitability of Troll B crude oil weathered under simulated Arctic conditions (0%, 50% and 90% ice cover). The experiments were performed in different scales at SINTEF’s laboratories in Trondheim, field research station on Svalbard and in broken ice (70-90% ice cover) in the Barents Sea. Samples from the weathering experiments were tested for ignitability using the same laboratory burning cell. The measured ignitability from the experiments in these different scales showed a good agreement for samples with similar weathering. The ice conditions clearly affected the weathering process, and 70% ice or more reduces the weathering and allows a longer time window for in situ burning. The results from the Barents Sea revealed that weathering and ignitability can vary within an oil slick. This field use of the burning cell demonstrated that it can be used as an operational tool to monitor the ignitability of oil spills.     

Depositional history of the North Taymyr ice‐marginal zone,Siberia—a landsystem approach

The sediment–landform associations of the northern Taymyr Peninsula in Arctic Siberia tell a tale of ice sheets advancing from the Kara Sea shelf and inundating the peninsula, probably three times during the Weichselian. In each case the ice sheet had a margin frozen to its bed and an interior moving over a deforming bed. The North Taymyr ice‐marginal zone (NTZ) comprises ice‐marginal and supraglacial landsystems dominated by thrust‐block moraines 2–3 km wide and large‐scale deformation of sediments and ice. Large areas are still underlain by remnant glacier ice and a supraglacial landscape with numerous ice‐walled lakes and kames is forming even today. The proglacial landsystem is characterised by subaqueous (e.g. deltas) or terrestrial (e.g. sandar) environments, depending on location/altitude and time of formation. Dating results (OSL, ¹⁴C) indicate that the NTZ was initiated ca. 80 kyr BP during the retreat of the Early Weichselian ice sheet and that it records the maximum limit of a Middle Weichselian glaciation (ca. 65 kyr BP). During both these events, proglacial lakes were dammed by the ice sheets. Part of the NTZ was occupied by a thin Late Weichselian ice sheet (20–12 kyr BP), resulting in subaerial proglacial drainage. Copyright © 2002 John Wiley & Sons, Ltd.     

There's a ratfish in our cellar!

A crushed fossil fish-head, discovered on a Lower Carboniferous flagstone from the Isle of Man, proves to be the only known articulated specimen of the early ratfish Psammodus . This is a major discovery, which promises to cast light on a key episode in the evolution of shark-like fishes.     

Climate change risks for severe storms in developing countries in the context of poverty and inequality in Cambodia

Least developed countries are generally regarded as particularly sensitive to climate change due to among other vulnerable locations and low adaptation capabilities. In the present study, we address climate change hazards in least developed countries by presenting a methodological framework, which is suitable for the estimation damage costs as a function of risk aversion, equality, income distribution and climate scenario using state-of-the-art climate model projections. As a case study, the methodology is applied to study severe storms in Cambodia based on two future climate scenarios and data on historical damages from storm events, which are used as a proxy in performing a sensitivity analysis on all input parameters. For the assumptions and parameter ranges used here, the study shows a high sensitivity to the income distribution (reflected by discount rates) and risk aversion and smaller effects from equality measures and extreme wind climate scenario. We emphasize that the assumptions on risk aversion reflecting consumption smoothing possibilities of low-income households clearly depicts that climate risks can be particularly high as a consequence of poverty and therefore recommend that context-specific vulnerabilities and equity concerns in climate risk studies should be included when making assessments for least developed countries.     

Effects of resuspension on benthic fluxes of oxygen,nutrients, dissolved inorganic carbon,iron and manganese in the Gulf of Finland,Baltic Sea

The effect of resuspension on benthic fluxes of oxygen (O₂), ammonium (NH₄⁺), nitrate (NO₃^?), phosphate (PO₄^3?), silicate (Si(OH)₄), dissolved inorganic carbon (DIC), total dissolved iron (Fe) and total dissolved manganese (Mn) was studied at three different stations in the Gulf of Finland (GoF), Baltic Sea during three cruises in June–July 2003, September 2004 and May 2005. The stations were situated on different bottom types in the western, central and eastern part, respectively, of the open GoF. The fluxes were measured in-situ using the autonomous Göteborg benthic lander. To simulate resuspension events, the stirring speed was increased in two of the four chambers of the lander after approximately half of the incubation time. The other two chambers were used as control chambers. Clear effects of resuspension were observed on the oxygen fluxes where an increase of the consumption was observed in 88% of the cases and on average with 59% (stdev=53). The NH₄⁺ fluxes were affected in 50% of the cases (4 out of 8 incubations) at stations with low bottom water oxygen concentrations, but in no cases where the bottom water was oxygenated (0 out of 9 incubations). The NH₄⁺ fluxes decreased by 26±27% in 2005 and by 114±19% in 2003. There was no clear effect of resuspension on the fluxes of any of the other solutes in this study. Thus, resuspension events did not play a significant role in release/uptake of NO₃^?, PO₄^3?, Si(OH)₄, DIC, Fe and Mn in GoF sediments. However, increased oxygen consumption as a result of resuspension may lead to spreading of anoxic/suboxic bottom water conditions, and thus indirectly to increased benthic release of phosphate, ammonium and iron.     

An OSL‐dated sediment sequence at Idre,west‐central Sweden,indicates ice‐free conditions in MIS 3

In central and northern Sweden, glacial sediments and landforms, formed during Early and Middle Weichselian stadials and their transition into interstadials, are often preserved in spite of having been overridden by later glacial advances. This study presents an OSL‐dated glacial stratigraphy from Idre in west‐central Sweden, expanding the area in which Middle Weichselian ice‐free conditions have been identified. Three sedimentary units were identified, with the lowermost unit consisting of glaciolacustrine sand, deposited in a stagnant water‐body. Nine OSL samples gave ages ranging from 54 to 41 ka, suggesting deposition during a deglacial phase in MIS 3. Normal faults and silt veins, formed after deposition, indicate that the area was ice‐free for a prolonged period, enabling the melting of buried stagnant ice. Above an erosional unconformity is a sediment unit characterized by gravels and sands deposited in a proximal braided‐river environment. OSL ages range from 180 to 41 ka, indicating poor sediment bleaching during deposition. We thus consider them to give a maximum age of the sedimentation, indicating deposition at or after 41 ka. The uppermost unit consists of a stacked succession of subglacial traction tills and glaciotectonite beds, representing the Late Weichselian glaciation of the area, probably during the inception phase with a wet‐based glacier regime. At the last deglaciation of the area there was extensive meltwater erosion, eroding all sedimentary units and forming a landscape with terraces and channels, and erosional remnants of the uppermost diamict as free‐standing hummocks.     

Social Change, Ecology and Climate in 20th-Century Greenland

Two great transitions, from seal hunting to codfishing, then from cod fishing to shrimp, affectedpopulation centers of southwest Greenland during the20th century. These economic transitionsreflected large-scale shifts in the underlying marineecosystems, driven by interactions between climate andhuman resource use. The combination of climaticvariation and fishing pressure, for example, provedfatal to west Greenland's cod fishery. We examine thehistory of these transitions, using data down to thelevel of individual municipalities. At this level,the uneven social consequences of environmental changeshow clearly: some places gained, while others lost. Developments in 20th-century Greenland resemblepatterns of human-environment interactions in themedieval Norse settlements, suggesting some generalpropositions relevant to the human dimensions ofclimatic change.