A nitrate and silicate budget in the equatorial Pacific Ocean: a coupled physical–biological model study

A coupled physical–biological model was developed to simulate the low-silicate, high-nitrate, and low-chlorophyll (LSHNLC) conditions in the equatorial Pacific Ocean and used to compute a detailed budget in the Wyrtki box (5°N–5°S, 180–90°W) for the major sources and cycling of nitrogen and silicon in the equatorial Pacific. With the incorporation of biogenic silicon dissolution, NH₄ regeneration from organic nitrogen and nitrification of ammonia in the model, we show that silicon recycling in the upper ocean is less efficient than nitrogen. As the major source of nutrients to the equatorial Pacific, the Equatorial Undercurrent provides slightly less Si(OH)₄ than NO₃ to the upwelling zone, which is defined as 2.5°N–2.5°S. As a result, the equatorial upwelling supplies less Si(OH)₄ than NO₃ into the euphotic zone in the Wyrtki box, having a Si/N supply ratio of about 0.85 (2.5 vs. 2.96 mmolm⁻² day⁻¹). More Si(OH)₄ than NO₃ is taken up with a Si/N ratio of 1.17 (2.72 vs. 2.33 mmolm⁻² day⁻¹) within the euphotic zone. The difference between upwelling supply and biological uptake is balanced by nutrient regeneration and horizontal advection. Excluding regeneration, the net silicate and nitrate uptakes are nearly equal (1.76 vs. 1.84 mmolm⁻² day⁻¹). However, biogenic silica export production is slightly higher than organic nitrogen (1.74 vs. 1.59 mmolm⁻² day⁻¹) following a 1.1 Si/N ratio. In the central equatorial Pacific, low silicate concentrations limit diatom growth; therefore non-diatom new production accounts for most of the new production. Higher silicate supply in the east maintains elevated diatom growth rates and new production associated with diatoms dominate upwelling zone. In contrast, the new production associated with small phytoplankton is nearly constant or decreases eastward along the equator. The total new production has a higher rate in the east than in the west, following the pattern of surface silicate. This suggests that silicate regulates the diatom production, total new production, and thereby carbon cycle in this area. The modeled mean primary production is 48.4 mmolCm⁻² day⁻¹, representing the lower end of direct field measurements, while new production is 15.0 mmolCm⁻² day⁻¹, which compares well with previous estimates.     

黄、渤海沿岸海冰测点代表性浅析

通过分析１９８０年以后的海冰资料和卫星云图照片，对黄、渤海沿岸１１个海冰测点的历史变迁进行了评述，浅析了测点的优劣及使用资料时应注意的事项。     

大鹏澳海域水体磷的形态及其分布特征

根据１９９２年１２月（冬季）和１９９３年７月（夏季）对大鹏澳海域２４ｈ定点连续观测和夏季大面调查，统计了该海域各种形态磷的变化范围和平均含量；计算了各种形态磷分别占总磷（ＴＰ）和总溶解磷（ＴＤＰ）的百分比；讨论了各种形态磷之间的相互关系；分析了影响ＴＰ和ＴＤＰ分布的环境因素。     

Molecular identification of bloom-forming species Phaeocystis globosa (Pryninesiophyta) and its dispersal based on rDNA ITS sequence analysis

The colony-forming Phaeocystis species are causative agents of dense bloom occurrences in coastal waters worldwide. It is difficult to separate them because of the different morphologies associated with their colonial stages. In this study we applied molecular approaches to analyze the genetic variation of Phaeocystis globosa and Phaeocystis pouchetii from several geographic regions, and to assist in tracing the dispersal of bloom-forming Phaeocystis species in coastal waters of China. The sequences of the internal transcribed spacers (ITS1 and ITS2) of rDNA and the 5.8S ribosomal RNA gene of Phaeocystis strains were determined. Sequence comparison shows that P.globosa was the most divergent to P. pouchetii, exhibiting sequence divergence higher than 0.08. However, lower genetic divergences existed between strains of P.globosa. The sequence comparison of the Phaeocystis rDNA ITS clearly shows that the species isolated from the southeast coast of China is identified as P.globosa rather than P. cf. pouchetii or other species. Furthermore, the significance of rDNA variation in distinct global populations of P.globosa suggested it might have had sufficient time to accumulate detectable mutations at the rDNA locus, supporting the hypothesis of ancient dispersal of P.globosa to many areas, meaning that P.globosa blooms in the coastal waters of China are endemic rather than a newly introduced species or a foreign source. Finally, based on the high divergent region of rDNA ITS, a pair of species-specific primers for P.globosa were designed, they could be useful to detect the presence of this species in mixed plankton assemblages or flagellate stages that are recognized with diffculties by means of conventional microscopy.     

水下智能潜器的神经网络运动控制

本文介绍一种基于神经网络的水下智能潜器的运动控制方法，该方法通过在线学习，融控制与滤波为一体。计算机仿真与水池实验验证表明，该方法的控制与滤波性能良好，对环境的学习与适应能力强。该方法事实上可用于一般动力系统的控制。     

碘－钒盐催化下合成的四溴邻苯二甲酸酐

报道一种新的有效催化剂－碘－钒盐和在一定条件下合成四溴邻苯二甲酸酐的方法。探讨催化剂的组成配比、用量、温度及废酸循环使用等因素对合成方法的影响。该催化剂的催化效果和常用的碘、碘－铁催化剂相同，适用于四溴邻苯二甲酸酐的合成。     

凡纳滨对虾咸淡水养殖系统内细菌群落组成的PCR-DGGE分析

采用PCR(polym erase chain reaction)-DGGE(denaturing grad ient gel electrophoresis)及传统的微生物培养方法对凡纳滨对虾Litopenaeus vannam ei咸淡水养殖系统内各种环境的细菌群落组成进行了比较研究。传统的微生物培养计数表明,从海湾水、养殖池水到对虾粪样,细菌和弧菌的数量表现出依次增加的趋势,粪样及肠壁中弧菌的数量高出外界水环境1—4个数量级。相对于外界水环境,粪样中有很高的芽孢杆菌孢子含量,但是肠壁定植细菌中不存在芽孢杆菌(孢子)。PCR-DGGE及聚类分析结果表明,从海湾沿岸、养殖池、对虾粪便到对虾肠壁,细菌群落的多样性由高到低,无论是在哪种环境,群落的优势种都十分明显,且只有2—4种。来自同一环境各样品间的细菌群落组成非常相似,来自不同环境的样品,其细菌群落组成差别较大。聚类图上各簇的排列顺序反映了样品在取样空间分布上的毗邻次序和它们的相似程度。     

一次台风尾流暴雨的多普勒雷达资料特征分析福

利用多普勒雷达加密资料对发生在闽南的一次台风尾流暴雨进行中尺度分析。结果表明 ,这次暴雨过程由两阶段暴雨组成 :第一阶段暴雨是由海上形成的中尺度气旋造成的 ;第二阶段暴雨是由切变线上的强辐合及切变线上形成的边界层中尺度气旋造成的。暴雨雨带的形成主要与“逆风区”、气流辐合、边界层急流、切变、地形有关。     

海桑属红树植物遗传多样性和引种关系研究

以海南东寨港红树林自然保护区内无瓣海桑(Sonneratia apetala)、海南海桑(S.hainanensis)、拟海桑(S.paracaseolaris)、杯萼海桑(S.abla)、大叶海桑(S.ovata)、海桑(S.caseolaris)等6种海桑属红树植物为材料,对15个有效引物进行RAPD分析,共扩增出512条带,其中多态性条带为297,占总扩增条带的58.01%.Nei指数法分析和UPGMA统计分析表明,6种海桑属红树植物分为A,B,C3个组,平均遗传距离为0.38.A组包括无瓣海桑、海南海桑、大叶海桑、怀萼海桑,其中无瓣海桑、海南海桑、大叶海桑处于同一个亚组.B组包括拟海桑.C组包括海桑.对海南和福建无瓣海桑种群进行RAPD分析.对Shannon表型多样性指数统计结果表明,福建种群为0.669,海南种群为0.671,各种群遗传变异较大,这与无瓣海桑种群广泛的适应性相一致.对种群间的Shannon表型多样性指数分析表明,种群内的遗传变异占整个遗传变异的93.3%,而种群间的遗传变异仅占6.7%.这表明无瓣海桑种群的大部分遗传变异存在于种群内,而种群间的遗传变异较小.由此可见,无瓣海桑基因组丰富的多样性,是使其由海南成功引种到福建的重要因素.     

海洋平台结构形状与拓扑优化设计

以实际环境荷载作用下的实际海洋导管架平台结构为对象，研究了海洋平台结构在风，流，海冰等多荷载模式和多荷载工况下的优化设计的理论方法和应用技术，建立了结构尺寸优化，形状优化和拓扑优化问题的统一模型。计算结果反映出形状优化比尺寸优化所得设计更优，而拓扑优化的设计效果最好。不同的荷载工况对应的最优拓扑形式不同，因此在实际设计中应考虑实际的荷载工况，选取不同的拓扑形式。