Integrated chronostratigraphy of Proterozoic-Cambrian boundary beds in the western Anabar region, northern Siberia

Carbonate-rich sedimentary rocks of the western Anabar region, northern Siberia, preserve an exceptional record of evolutionary and biogeochemical events near the Proterozoic/Cambrian boundary. Sedimentologically, the boundary succession can be divided into three sequences representing successive episodes of late transgressive to early highstand deposition; four parasequences are recognized in the sequence corresponding lithostratigraphically to the Manykal Formation. Small shelly fossils are abundant and include many taxa that also occur in standard sections of southeastern Siberia. Despite this coincidence of faunal elements, biostratigraphic correlations between the two regions have been controversial because numerous species that first appear at or immediately above the basal Tommotian boundary in southeastern sections have first appearances scattered through more than thirty metres of section in the western Anabar. Carbon- and Sr-isotopic data on petrographically and geochemically screened samples collected at one- to two-metre intervals in a section along the Kotuikan River, favour correlation of the Staraya Reckha Formation and most of the overlying Manykai Formation with sub-Tommotian carbonates in southeastern Siberia. In contrast, isotopic data suggest that the uppermost Manykai Formation and the basal 26 m of the unconformably overlying Medvezhya Formation may have no equivalent in the southeast; they appear to provide a sedimentary and palaeontological record of an evolutionarily significant time interval represented in southeastern Siberia only by the sub-Tommotian unconformity. Correlations with radiometrically dated horizons in the Olenek and Kharaulakh regions of northern Siberia suggest that this interval lasted approximately three to six million years, during which essentially all 'basal Tommotian' small shelly fossils evolved.     

Trace Element and Isotope Geochemistry of the Volcanic Rocks of Bequia, Grenadine Islands, Lesser Antilles Arc: a Study of Subduction Enrichment and Intra-crustal Contamination

Pliocene volcanics on the island of Bequia comprise two interbeddedsuites of basalts and andesites. The isotopically homogeneoussuite (IHS) has a limited range of Sr—Nd—Pb isotopes(⁸⁷Sr/⁸⁶Sr 0.7040–0.7046, ¹⁴³ Nd/¹⁴⁴ Nd 0.5130 and ²⁰⁶Pb/²⁰⁴Pb 19.36–19.51), and mantle-like ¹⁸O values (5.5in clinopyroxene). The isotopically diverse suite (IDS) is characterizedby much wider ranges of radiogenic isotopes (⁸⁷ Sr/⁸⁶Sr 0.7048–0.7077,¹⁴³ Nd/¹⁴⁴ Nd 0.5128–0.5123 and ²⁰⁶ Pb/²⁰⁴ Pb 19.7–20.2),in which all of the Sr and Pb ratios are higher and Nd ratiosare lower than those of the IHS. The IDS is also characterizedby high ¹⁸ O values, up to 7.6 in clinopyroxene. The Sr andPb isotope ratios are too high, and the Nd isotope ratios aretoo low in the IDS for any of these lavas to be derived fromunmodified depleted mantle. Both suites are petrologically very similar and their majorelement compositions and phenocryst contents suggest that theywere formed largely by fractional crystallization of a hydroustholeiitic melt at pressures <3 kbar. The isotopic ratiosand enrichments in large ion lithophile elements (LILE), andto some extent light rare earth elements (LREE), as comparedwith mid-ocean ridge basalts (MORB), of the IHS lavas suggestthat they were derived from a depleted mantle source which hadbeen re-enriched by the addition of 1–4% of a subductioncomponent. This component probably comprised a mixture of dehydrationfluids, and perhaps minor siliceous melts, released from subductingsediments and mafic crust. The extreme isotopic ranges, largeenrichments in incompatible elements, more fractionated LREEpatterns and higher ¹⁸ O values of the IDS lavas are interpretedas resulting from 10–55% assimilation—fractionalcrystallization of sediments, derived from the Guyana Shield,which are present in the arc crust, by IHS type melts. KEY WORDS: trace elements; radiogenic isotopes; arc lavas; Lesser Antilles ^*Corresponding author.     

Design of land-air parameterization scheme (LAPS) for modelling boundary layer surface processes

Summary A land-air parametrization scheme (LAPS) describes mass, energy and momentum transfer between the land surface and the atmosphere. The scheme is designed as a software package which can be run as part of an atmospheric model or a stand-alone scheme. A single layer approach is chosen for the physical and biophysical scheme background. The scheme has six prognostic variables: two temperatures (one for the canopy vegetation and one for soil surface), one interception storage, and three soil moisture storage variables. The scheme's upper boundary conditions are: air temperature, water vapour pressure, wind speed, radiation and precipitation at some reference level within the atmospheric boundary layer. The sensible and latent heat are calculated using resistance representation. The evaporation from the bare soil is parametrized using the scheme. The soil part is designed as a three-layer model which is used to describe the vertical transfer of water in the soil.The performances of the LAPS scheme were tested using the results of meteorological measurements over a maize field at the experimental site De Sinderhoeve (The Netherlands). The predicted partitioning of the absorbed radiation into sensible and latent heat fluxes is in good agreement with observations. Also, the predicted leaf temperature agrees quite well with the observed values.With 9 Figures     

Crystal-Mush Compaction and the Origin of Pegmatitic Segregation Sheets in a Thick Flood-Basalt Flow in the Mesozoic Hartford Basin, Connecticut

Where the Holyoke flood-basalt flow in the Mesozoic HartfordBasin in Connecticut is thick and contains coarse-grained, horizontalsegregation sheets in its central part, the lower part of theflow is strongly depleted in incompatible elements; where theflow is thin and contains no segregation sheets it is homogeneousthroughout. This chemical variation can be explained only throughcompaction of the partly crystallized basalt. The compositionof the segregation sheets shows that they separated from thebasalt following only 33% crystallization. The segregation sheets,however, are clearly intrusive into the basalt, which must thereforehave already formed a crystal mush with finite strength at thislow degree of crystallinity. The incompatible element concentrationsindicate that the partly crystallized basalt underwent as muchas 28% compaction in the lowest 60 m of the flow. Between 60and 130 m above the base of the flow, the crystal mush becamedilated, and eventually ruptured with formation of the segregationsheets. No segregation sheet has a composition indicating separationafter more than 33% crystallization of the basalt. This is interpretedto indicate that compaction ceased at this stage because ofthe increasing strength of the mush and the increasing densityof the fractionating interstitial liquid KEY WORDS: crystal-mush compaction; segregation shtets; flood basalt; tholeiitie; Connecticut ^*e-mail: philpotts{at}geol.uconn.edu     

Winter severity in Europe: The fourteenth century

The fourteenth century is known to include a period of winter cooling in Central and Western Europe, but its timing and magnitude are not clearly established. An attempt to obtain a coherent picture from verified documentary evidence yielded 2133 records from a region covering Central Europe and Northern Italy, mostly originating from the Monumenta Germaniae Historica. Temperatures were assessed using semi-quantitative indices on the basis of proxy information on snow-cover, ice and untimely activity of vegetation. Results: A run of cold winters from 1303 to 1328 was followed by a run of average winters up to 1354. Then winter temperatures were extremely variable up to 1375. For the rest of the century they fluctuated somewhat below the average of the twentieth century. The pattern in the first five decades is compared to that in the Late Maunder Minimum (1675–1715). The possible role of forcing factors (variations in solar output, North Atlantic Deep Water formation) is briefly discussed.     

Italian zeolitized rocks of technological interest

Large areas of Italian territory are covered by thick and widespread deposits of zeolite-bearing volcaniclastic products. The main zeolites are phillipsite and chabazite spread over the whole peninsula, and clinoptilolite recorded only in Sardinia. A trachytic to phonolitic glassy precursor accounts for the formation of the former zeolites characterized by low Si/Al ratios (3.00), while clinoptilolite is related to more acidic volcanism. The genesis of most of these zeolitized deposits is linked to pyroclastic flow emplacement mechanisms characterized by quite high temperatures and by the presence of abundant fluids. The main utilization of these materials has been and still is as dimension stones in the building industry. Currently, limited amounts are also employed in animal farming (dietary supplement, pet litter and manure deodorizer) and in agriculture as soil improvement and slow-release fertilizers. New fields of application have been proposed for these products on account of their easy availability, very low cost, their high-grade zeolites (50–70%), and good technological features such as high cation exchange capacities and adsorption properties.     

Natural zeolites as cation exchangers for environmental protection

This study describes the state-of-the-art with regard to the use of natural zeolites in the protection of the environment. The review is made up of four main sections. The first introduces the possible cation exchange procedures that can be operated at an industrial level, together with the principles on which they are based. The second deals with removal of NH ₄ ⁺ from municipal and industrial wastewater, reporting operational results from the main industrial-scale plants, together with the most significant and recent laboratory data. The third points out the possibilities for use of natural zeolites for removal of heavy metals from water after laboratory experiments. The fourth shows how chemical and structural features make zeolites a very powerful tool for the decontamination of waters containing radionuclides.     

Trace metals in suspended particulate matter and in sediment trap material from a permanently anoxic fjord — Framvaren, South Norway

Geochemical studies of the trace metal concentrations in suspended particulate matter (SPM) and sediment trap material from a permanently anoxic fjord, Framvaren, South Norway in 1989 and 1993 indicate that extremely high concentrations of zinc (max = 183920 mg/kg), copper (max = 4130 mg/kg), lead (max = 2752 mg/kg), and cadmium (max= 8.1 mg/kg) sometimes (1993) occur in the SPM collected in the anoxic water layer. The highest concentrations of Zn occur just below the redoxcline at 22 m water depth (in 1993), and copper, lead and cadmium have maximum concentrations between 30 and 80 m depth, where the amount of total SPM is at a minimum (about 0.3 mg/L). On a mass per volume (g/L) basis, the maximum concentrations of Cd, Cu and Fe occur at the interface (21m) and those of Zn occur just below the redoxcline (22 m depth). The SPM and sediment trap data suggest that the metals are precipitated as sulfide minerals in the anoxic water. The presence of particulate sulfides was confirmed by SEM studies that show the occurrence of discrete metal (Cu, Fe, Pb, and Zn) sulfide particles in size from 10–20 m as well as framboidal pyrites (1–5 m in size). Higher levels of metal sulfides at intermediate depths rather than in the deep water of Framvaren (> 100 m), may be due to input of trace metals by water exchange over the sill in the upper part of the water column. In the deep water, less metal sulfide precipitation takes place due to depletion of trace metals, and the dilution of particulate metal concentrations by organic matter and by the chemogenic formation of calcite.     

The contact binary system YY Eri

Relatively new and unanalysed photometric data-sets of the contact binary system YY Eri are presented. The light curves have been analysed using information limit optimization techniques, and the Binary Maker program of Bradstreet (1992).Comparison of the results allows insight into determinacy questions affecting the W UMa type of light curve, which relates to our general understanding of contact binaries. A limiting contact configuration cannot be ruled out on the basis of empirical data-analysis alone.Very careful analysis of the photospheric flux distribution over the surface of the Sun may help establish appropriate values of the gravity brightening parameter for cool dwarf stars. At present, however, empirical photometric information on contact binaries is non-discriminatory: i.e. alternative cosmogonies can find alternative support from available evidence. The implication is then for more and better observational data to allow better real independent parameter determination.     

Motion of test particles in parabolic density distributions

A detailed study of the motion of test-particles [either having a nonzero rest-mass or zero rest-mass] has been carried out for Tolman's type VII solution with vanishing surface density, which is one of the few physically relevant exact solutions of Einstein's field equations for static and spherically symmetric mass distributions.The trapping angles, 0, at which the test-particles escape these configurations are calculated and the trajectories of test-particles are studied in detail. The types of trajectories found for this spacetime geometry are: (1) arc-like trajectories, (2) spiral-like trajectories ending into a circle of constant radius, (3) trajectories with a cusp at the minimum distance, (4) double-bounded trajectories, and (5) double-bounded trajectories with a cusp at the minimum distance. The test-particles following the trajectories of type (1) and type (3) escape the configuration while others are trapped within the structure. Besides the advancement of periastron of the orbits the retrogradation of periastrons are also observed.The stability of the structures is considered by using the variational method (Chandrasekhar, 1964a,b), and its is seen that the structures remain stable at least for a central redshift,z0, as large as 5.09.These studies may distinguish relativistic cluster from a Newtonian one and may find application to the local models of quasi-stellar objects (QSOs).