极地深部冰层取心钻探孔壁水压致裂研究

为了维护极地深部冰层取心钻探工作中钻孔的稳定,避免孔内事故的发生,冰层孔壁的水压致裂问题是亟待解决的重要科学问题之一。本文在深入分析国内外冰层钻探资料的基础上,结合冰盖动力学相关理论,计算得出了钻孔所在区域冰层的密度、温度及内部应力随深度的变化规律。在此基础上,结合油气资源勘探水力压裂技术与冰层钻进钻井液等相关理论,建立了合理的孔壁压差计算方法,深入探讨了适用于深部冰层钻探孔壁水压致裂机理。研制了冰层钻孔水压致裂模拟实验装置,可分析研究不同围压条件下冰样的脆性变形机理。结合我国Dome A深冰心钻探工程实际,提出钻孔可能发生水压致裂的深度区域及孔壁所需的起始裂纹长度判定,以期为后续的安全高效冰层钻进提供重要的理论依据。     

Data Assimilation Modeling of the Barotropic Tides in the Korea/Tsushima Strait

During 1999–2000, 13 bottom mounted acoustic Doppler current profilers (ADCPs) and 12 wave/tide gauges were deployed along two lines across the Korea/Tsushima Strait, providing long-term measurements of currents and bottom pressure. Tidally analyzed velocity and pressure data from the moorings are used in conjunction with other moored ADCPs, coastal tide gauge measurements, and altimeter measurements in a linear barotropic data assimilation model. The model fits the vertically averaged data to the linear shallow water equations in a least-squares sense by only adjusting the incoming gravity waves along the boundaries. Model predictions are made for the O₁, P₁, K₁, μ₂, N₂, M₂, S₂, and K₂ tides. An extensive analysis of the accuracy of the M₂ surface-height predictions suggests that for broad regions near the mooring lines and in the Jeju Strait the amplitude prediction errors are less than 0.5 cm. Elsewhere, the analysis suggests that errors range from 1 to 4 cm with the exception of small regions where the tides are not well determined by the dataset. The errors in the model predictions are primarily caused by bias error in the model’s physics, numerics, and/or parameterization as opposed to random errors in the observational data. In the model predictions, the highest ranges in sea level height occur for tidal constituents M₂, S₂, K₁, O₁, and N₂, with the highest magnitudes of tidal velocities occurring for M₂, K₁, S₂, and O₁. The tides exhibit a complex structure in which diurnal constituents have higher currents relative to their sea level height ranges than semi-diurnal constituents.     

Constraining genesis and geotectonic setting of metavolcanic complexes: a multidisciplinary study of the Devonian Vrbno Group (Hrubý Jeseník Mts., Czech Republic)

The low-grade metavolcanic/volcanosedimentary complex of the Devonian Vrbno Group (Silesicum, NE Bohemian Massif, Czech Republic) occurs in two ~NE–SW trending belts, separated by tectonic slices of Cadomian metagranitic paraautochton. (1) The basic–intermediate lavas of the calc-alkaline Western Volcanic Belt came from a moderately depleted mantle $ \left( {\varepsilon_{\text{Nd}}^{370} \sim + 3} \right) $ . Rare rhyolites (374.0 ± 1.7 Ma: 2σ, LA–ICP–MS U–Pb Zrn) were derived most likely from immature crust or by extensive fractionation of primary basaltic melts. The rock association is interpreted as a vestige of a deeply dissected continental arc. (2) The Eastern Volcanic Belt consists mainly of (nearly) contemporaneous (371.0 ± 1.4 Ma) felsic alkaline lavas with high HFSE contents, as well as high Ga/Al and Fe/Mg ratios, typical of within-plate igneous setting. The petrology and Nd–Sr isotopic data point to a high-T anatexis of a young metagranitic crust, resembling the Cadomian (Brunovistulian) basement, in a back-arc setting. The attenuated Brunovistulian lithosphere could have partially melted by the heat provided by the upwelling asthenosphere and/or underplating basic magma. (3) Finally, the region was penetrated by numerous subalkaline, MORB/EMORB-like dolerite sheets—a hallmark of the considerable crustal thinning.     

Optimization of ice cuttings transportation by cable-suspended core auger drills

Ice cores contain an abundance of information about the Earth''s climate in the past,and recovered from shallow drilling down to 300--350 m give sufficient information for reconstructing of the last climatic chan- ges and for monitoring of pollution from human being． Cable-suspended core auger drills use an armored cable with a winch to provide power to the down-hole motor system and to retrieve the down-hole unit． Because of their lightweight,convenient transportation and installation,high penetration rates and low power consumption, core auger drills are widely used for shallow drilling in ice． Nowadays at least 14 types of auger electromechani- cal drills were designed and tested in different foreign and national glaciological laboratories． However,auger options were usually determined by experience,and the main parameters (helix angle of the fights and rotational speed) are varied in a wide range from drill to drill． If parameters of auger are not chosen properly,poorly en- gineered drills had troubles with low efficiency of cuttings transportation,jam of ice cuttings,repeated fragmen- tation,cutters icing and stop penetration,abnormal power consumption,high rotation torques,and so on． Thus,this paper presents the method of optimization of ice cuttings transportation of cable-suspended core auger drill on the base of the theory of rotary auger． As the result,the optimal helix angle was determined correspond- ing to the rotational speed from the transportation efficiency point of view．     

Late Glacial and Holocene Palaeoenvironmental Changes in the Rostov-Yaroslavl’ Area, West Central Russia

Three lake sediment sequences (lakes Nero, Chashnitsy, Zaozer’e) from the Rostov-Jaroslavl’ region north of Moscow were studied to provide information on palaeoclimatic and palaeoenvironmental changes during the past 15,000 cal yr. The multi-proxy study (i.e., pollen, macrofossils, mineral magnetic measurements, total carbon, nitrogen and sulphur) is chronologically constrained by AMS ¹⁴C measurements. Lake Nero provided the longest sedimentary record back to ca. 15,000 cal yr BP, while sediment accumulation began around ca. 11,000 cal yr BP in the two other lakes, possibly due to melting of permafrost. Limnic plant macrofossil remains suggest increased lake productivity and higher mean summer temperatures after 14,500 cal yr BP. While the late glacial vegetation was dominated by Betula and Salix shrubs and various herbs, it appears that Betula sect. Albae became established as early as 14,000 cal yr BP. Major hydrological changes in the region led to distinctly lower lake levels, starting 13,000 cal yr BP in Lake Nero and ca. 9000 cal yr BP in lakes Chashnitsy and Zaozer’e, which are situated at higher elevations. These changes resulted in sedimentary hiatuses in all three lakes that lasted 3500–4500 cal yr. Mixed broad-leaved – coniferous forests were widespread in the area between 8200 and 6100 cal yr BP and developed into dense, species-rich forests between 6100 and 2500 cal yr BP, during what was likely the warmest interval of the studied sequences. Agricultural activity is documented since 500 cal yr BP, but probably began earlier, since Rostov was a major capital by 862 A.D. This apparent gap may be caused by additional sedimentary hiatuses around 2500 and 500 cal yr BP.     

Replication of a terrain stability mapping using an Artificial Neural Network

Subjective geomorphic mapping is a method commonly used for landslide hazard zonation. This method relies heavily on the skills and experience of the mapper, and therefore, its major drawbacks are the high costs and lack of consistency between products generated by different terrain mappers. In this study a method for cost-effective and consistent replication of subjective geomorphic mappings is demonstrated, by using a type of Artificial Neural Network named Learning Vector Quantization. This paper presents a study conducted in the Canadian province of British Columbia employing a high-quality data set. By utilizing Learning Vector Quantization, stable and unstable terrains were delineated with a similarity of approximately 91%, compared to the mapping produced by terrain specialists. Also, in this process, slope, elevation, aspect, and existing geomorphic processes were identified as the terrain attributes that contributed most to the quality of the mapping.     

Comparison of Solar and Geomagnetic Activity Effects on the Northern Hemisphere Weather Changes

The changes of pressure and temperature fields in the winter lower troposphere observed in association with changes in solar and/or geomagnetic activity are compared. It is shown that the fact whether it was solar or geomagnetic activity was not so important as whether the levels of the two activities were high or low. The differences between the effects of solar/geomagnetic activity, however, are revealed, the pressure and temperature data being stratified according to the QBO phase. The relationship obtained are discussed from the viewpoint of mechanisms resting upon both the planetary wave propagation and the changes of atmospheric air currents in the global electric circuit.     

Stress indications in the Bohemian Massif: Reinterpretation of borehole televiewer data

Summary This paper presents the first results of stress determinations in the Bohemian Massif utilizing televiewer data from deeper boreholes. The televiewer survey was originally carried out by Geological Survey Ostrava for the purpose of studying fractures and bedding in coal basins to depths of 2 km. A reinterpretation of the amplitude logs reveal a large number of stress-induced borehole elongations (breakouts) which occur in a direction perpendicular to the maximum horizontal principal stress (S_H). The breakout analysis in the Upper Silesian, Meno and Kladno Basins indicates a dominant NW-SE direction of S_H which is consistent with the pattern of stress orientation in Western Europe. The NE-SW trend observed in the Plze Basin is less reliable. A model for stress magnitude determinations is formulated as a linear programming problem. If the a priori information on rock strength properties is limited, it reduces to explicit formulas for stress regime estimates. The model is applied to data from the Upper Silesian Basin for which a compressional stress regime is derived.     

2005年国家自然科学基金批准项目一览表(地球科学部分)

~~2005年国家自然科学基金批准项目一览表(地球科学部分)~~     

Correction to: Zeolite containing rocks of kudurs and reasons of geophagy within the territory of Sikhote-Alin Nature Zapovednik,Far East of Russia

This paper establishes a mechanical model of the stress distribution in front of the driving face during coal roadway excavation. Theoretical research shows that the stress state in the plastic zone of the driving face is consistent with the limit equilibrium equation, and the elastic zone is in accordance with the equilibrium equation based on elasticity mechanics. Based on this improved mechanical state solution model, different coal material constitutive hypotheses are used for the analysis. The width of the plastic zone calculated under the brittle-perfectly elastic model can reach 2–5 times the height of the roadway, and the stress concentration coefficient can reach two or more times. 3DEC numerical simulation software was used to simulate the stress distribution of the heading face. The results of the simulation are similar to those of the theoretical analysis. Compared with the elastic-perfectly plastic model, the calculated results of the brittle-perfectly elastic model are more consistent with the numerical simulation results. The heading face coal during roadway excavation shows obvious damage, and the strength characteristics of the coal decrease.