利用斜井钻孔破裂观测值约束深井和深矿中的全应力张量——在两个复杂实例中的应用

经过15年时间我们发展出一套技术,即利用钻孔井壁的非致命性破裂,包括压性破裂、钻探诱发的张性破裂以及与切穿井孔断层的滑动有关的应力扰动观测值,来确定任意向井和钻孔中的全应力张量。这些技术已延伸应用到石油工业中,也应用到矿山开采的钻孔岩芯取样中,以取得开采区周围应力集中影响的区域内外的应力状态。条件允许时,可用水压致裂法估计最小主应力值,但不能估计最大水平主应力值。作者在文中先回顾了这套方法的概念,然后对两个复杂实例进行了研究。第1个实例涉及到圣安德烈斯断层深部观测站（San Andreas Fault Observatory at Depth,SAFOD）计划第1阶段钻探应力状态的确定,SAFOD计划是一个钻穿加州中部圣安德烈斯断层的科学钻井计划。第2个实例涉及到确定南非一个极深矿周围的地壳应力状态。这些研究表明,在相当大的深度范围内,斜井钻孔破裂观测值与应力大小和方向是一致的。     

U–Pb and Th–Pb dating of apatite by LA-ICPMS

Apatite is a common U- and Th-bearing accessory mineral in igneous and metamorphic rocks, and a minor but widespread detrital component in clastic sedimentary rocks. U–Pb and Th–Pb dating of apatite has potential application in sedimentary provenance studies, as it likely represents first cycle detritus compared to the polycyclic behavior of zircon. However, low U, Th and radiogenic Pb concentrations, elevated common Pb and the lack of a U–Th–Pb apatite standard remain significant challenges in dating apatite by LA-ICPMS, and consequently in developing the chronometer as a provenance tool.This study has determined U–Pb and Th–Pb ages for seven well known apatite occurrences (Durango, Emerald Lake, Kovdor, Mineville, Mud Tank, Otter Lake and Slyudyanka) by LA-ICPMS. Analytical procedures involved rastering a 10 μm spot over a 40 × 40 μm square to a depth of 10 μm using a Geolas 193 nm ArF excimer laser coupled to a Thermo ElementXR single-collector ICPMS. These raster conditions minimized laser-induced inter-element fractionation, which was corrected for using the back-calculated intercept of the time-resolved signal. A Tl–U–Bi–Np tracer solution was aspirated with the sample into the plasma to correct for instrument mass bias. External standards (Ple?ovice and 91500 zircon, NIST SRM 610 and 612 silicate glasses and STDP5 phosphate glass) along with Kovdor apatite were analyzed to monitor U–Pb, Th–Pb, U–Th and Pb–Pb ratiosCommon Pb correction employed the ²⁰⁷Pb method, and also a ²⁰⁸Pb correction method for samples with low Th/U. The ²⁰⁷Pb and ²⁰⁸Pb corrections employed either the initial Pb isotopic composition or the Stacey and Kramers model and propagated conservative uncertainties in the initial Pb isotopic composition. Common Pb correction using the Stacey and Kramers (1975) model employed an initial Pb isotopic composition calculated from either the estimated U–Pb age of the sample or an iterative approach. The age difference between these two methods is typically less than 2%, suggesting that the iterative approach works well for samples where there are no constraints on the initial Pb composition, such as a detrital sample. No ²⁰⁴Pb correction was undertaken because of low ²⁰⁴Pb counts on single collector instruments and ²⁰⁴Pb interference by ²⁰⁴Hg in the argon gas supply.Age calculations employed between 11 and 33 analyses per sample and used a weighted average of the common Pb-corrected ages, a Tera–Wasserburg Concordia intercept age and a Tera–Wasserburg Concordia intercept age anchored through common Pb. The samples in general yield ages consistent (at the 2σ level) with independent estimates of the U–Pb apatite age, which demonstrates the suitability of the analytical protocol employed. Weighted mean age uncertainties are as low as 1–2% for U- and/or Th-rich Palaeozoic–Neoproterozoic samples; the uncertainty on the youngest sample, the Cenozoic (31.44 Ma) Durango apatite, ranges from 3.7–7.6% according to the common Pb correction method employed. The accurate and relatively precise common Pb-corrected ages demonstrate the U–Pb and Th–Pb apatite chronometers are suitable as sedimentary provenance tools. The Kovdor carbonatite apatite is recommended as a potential U–Pb and Th–Pb apatite standard as it yields precise and reproducible ²⁰⁷Pb-corrected, ²³²Th–²⁰⁸Pb, and common Pb-anchored Tera–Wasserburg Concordia intercept ages.     

著名科学家莱昂·诺波夫(Leon Knopoff)逝世

莱昂·诺波夫(1925~2011),是一位对物理学、地震学和音乐领域做出贡献的国际著名科学家,于2011年1月20日在妻子和3个孩子的陪伴下于家中辞世。莱昂·诺波夫1949年在加州理工学院获得物理学和数学博士学位,翌年开始在洛杉矶加州大学任教。1960年洛杉矶加州     

Phytoplankton abundance and contributions to suspended particulate matter in the Ohio,Upper Mississippi and Missouri Rivers

Main channel habitats of the Ohio, Missouri, and Upper Mississippi Rivers were surveyed during the summers of 2004, 2005 and 2006 using a probability-based sampling design to characterize inter-annual and inter-river variation in suspended chlorophyll a (CHLa) and related variables. Large (fivefold) differences in CHLa were observed with highest concentrations in the Upper Mississippi (32.3 ± 1.8 μg L⁻¹), intermediate values in the Missouri (19.7 ± 1.1 μg L⁻¹) and lowest concentrations in the Ohio (6.8 ± 0.5 μg L⁻¹). Inter-annual variation was small in comparison to inter-river differences suggesting that basin-specific factors exert greater control over river-wide CHLa than regional-scale processes influencing climate and discharge. The rivers were characterized by variable but generally low light conditions as indicated by depth-averaged underwater irradiance <4 E m⁻² day⁻¹ and high ratios of channel depth to euphotic depth (>3). Despite poor light conditions, regression analyses revealed that TP was the best single predictor of CHLa (R ² = 0.40), though models incorporating both light and TP performed better (R ² = 0.60). Light and nutrient conditions varied widely within rivers and were inversely related, suggesting that riverine phytoplankton may experience shifts in resource limitation during transport. Inferred grazing and sedimentation losses were large yet CHLa concentrations did not decline downriver indicating that growth and loss processes were closely coupled. The contribution by algae to suspended particulate organic matter in these rivers (mean = 41%) was similar to that of lakes (39%) but lower relative to reservoirs (61%).     

Reinterpreting the Importance of Oxygen‐Based Biodegradation in Chloroethene‐Contaminated Groundwater

Chlororespiration is common in shallow aquifer systems under conditions nominally identified as anoxic. Consequently, chlororespiration is a key component of remediation at many chloroethene‐contaminated sites. In some instances, limited accumulation of reductive dechlorination daughter products is interpreted as evidence that natural attenuation is not adequate for site remediation. This conclusion is justified when evidence for parent compound (tetrachloroethene, PCE, or trichloroethene, TCE) degradation is lacking. For many chloroethene‐contaminated shallow aquifer systems, however, nonconservative losses of the parent compounds are clear but the mass balance between parent compound attenuation and accumulation of reductive dechlorination daughter products is incomplete. Incomplete mass balance indicates a failure to account for important contaminant attenuation mechanisms and is consistent with contaminant degradation to nondiagnostic mineralization products like CO₂. While anoxic mineralization of chloroethene compounds has been proposed previously, recent results suggest that oxygen‐based mineralization of chloroethenes also can be significant at dissolved oxygen concentrations below the currently accepted field standard for nominally anoxic conditions. Thus, reassessment of the role and potential importance of low concentrations of oxygen in chloroethene biodegradation are needed, because mischaracterization of operant biodegradation processes can lead to expensive and ineffective remedial actions. A modified interpretive framework is provided for assessing the potential for chloroethene biodegradation under different redox conditions and the probable role of oxygen in chloroethene biodegradation.     

Tall building vibration control using a TM‐MR damper assembly: Experimental results and implementation

This paper summarizes the relevant results of the design, construction, testing, and implementation of a nominal 120 kN magnetorheological damper developed to control a free‐plan tall building in Santiago, Chile, equipped with two 160‐ton tuned masses. Cyclic as well as hybrid simulation tests were performed on the prototype damper. Global building responses using measured MR properties showed good correlation with analytical estimations. Also, a proposed physical controller for the MR damper was validated through hybrid and building pull‐back tests. Its performance is essentially equivalent to that of an LQR controller, but the information needed in its implementation is considerably less. Pull‐back tests of 10 cm amplitude were performed on one mass along the flexible edge of the building and its response controlled using the passive and controlled modes of the MR damper. The MR damper was capable of controlling the TM displacements very effectively, as well as the simulated building response for different ground motions and harmonic excitation. Copyright © 2010 John Wiley & Sons, Ltd.     

Bioturbation on a south‐east Australian hillslope: estimating contributions to soil flux

The contribution of bioturbation to downslope soil transport is significant in many situations, particularly in the context of soil formation, erosion and creep. This study explored the direct flux of soil caused by Aphaenogaster ant mounding, vertebrate scraping and tree‐throw on a wildfire‐affected hillslope in south‐east Australia. This included the development of methods previously applied to Californian gopher bioturbation, and an evaluation of methods for estimating the volume of soil displaced by tree‐throw events. All three bioturbation types resulted in a net downslope flux, but any influence of hillslope angle on flux rates appeared to be overshadowed by environmental controls over the spatial extent of bioturbation. As a result, the highest flux rates occurred on the footslope and lower slope. The overall contribution of vertebrate scraping (57.0 ± 89.4 g m^?1 yr^?1) exceeded that of ant mounding (36.4 ± 66.0 g m^?1 yr^?1), although mean rates were subject to considerable uncertainty. Tree‐throw events, which individually cause major disturbance, were limited in their importance by their scarcity relative to faunalturbation. However, tree‐throw might be the dominant mechanism of biotic soil flux on the mid‐slope provided that it occurs at a frequency of at least 2–3 events ha^?1 yr^?1. Although direct biotic soil flux appears to be geomorphologically significant on this hillslope, such transport processes are probably subordinate to other impacts of bioturbation at this site such as the enhancement of infiltration following wildfire. Copyright © 2011 John Wiley & Sons, Ltd.     

The ECORS-Truc Vert’08 nearshore field experiment: presentation of a three-dimensional morphologic system in a macro-tidal environment during consecutive extreme storm conditions

A large multi-institutional nearshore field experiment was conducted at Truc Vert, on the Atlantic coast of France in early 2008. Truc Vert’08 was designed to measure beach change on a long, sandy stretch of coast without engineering works with emphasis on large winter waves (offshore significant wave height up to 8 m), a three-dimensional morphology, and macro-tidal conditions. Nearshore wave transformation, circulation and bathymetric changes involve coupled processes at many spatial and temporal scales thus implying the need to improve our knowledge for the full spectrum of scales to achieve a comprehensive view of the natural system. This experiment is unique when compared with existing experiments because of the simultaneous investigation of processes at different scales, both spatially (from ripples to sand banks) and temporally (from single swash events to several spring-neap tidal cycles, including a major storm event). The purpose of this paper is to provide background information on the experiment by providing detailed presentation of the instrument layout and snapshots of preliminary results.     

Recovery from the impact of light reduction on the seagrass Amphibolis griffithii, insights for dredging management

A large-scale, manipulative experiment was conducted to examine the extent and rate of recovery of meadows of the temperate Australian seagrass, Amphibolis griffithii to different light-reduction scenarios typical of dredging operations, and to identify potential indicators of recovery from light reduction stress. Shade cloth was used to mimic different intensities, durations and start times of light reduction, and then was removed to assess the recovery. The meadow could recover from 3 months of light stress (5-18% ambient) following 10 months re-exposure to ambient light, even when up to 72% of leaf biomass was lost, much faster recovery rates than has previously been observed for large seagrasses. However, when the meadow had been shaded for 6-9 months and more than 82% of leaf biomass was lost, no recovery was detected up to 23 months after the light stress had ceased, consistent with other studies. Five potential indicators of recovery were recommended.     

Integration of the life of field seismic data with the reservoir model at the Valhall Field‡

The frequent time‐lapse observations from the life of field seismic system across the Valhall field provide a wealth of information. The responses from the production and injection wells can be observed through time‐shift and amplitude changes. These observations can be compared to modelled synthetic seismic responses from a reservoir simulation model of the Valhall Field. The observed differences between the observations and the modelling are used to update and improve the history match of the reservoir model. The uncertainty of the resulting model is reduced and a more confident prediction of future reservoir performance is provided. A workflow is presented to convert the reservoir model to a synthetic seismic response and compare the results to the observed time‐lapse responses for any time range and area of interest. Correlation based match quality factors are calculated to quantify the visual differences. This match quality factor allows us to quantitatively compare alternative reservoir models to help identify the parameters that best match the seismic observations. Three different case studies are shown where this workflow has helped to reduce the uncertainty range associated with specific reservoir parameters. By updating various reservoir model parameters we have been able to improve the match to the observations and thereby improve the overall reservoir model predictability. The examples show positive results in a range of different reservoir modelling issues, which indicates the flexibility of this workflow and the ability to have an impact in most reservoir modelling challenges.