The role of archaeological and cultural-historical records in long-range coastal fisheries resources management strategies and policies in the Pacific Islands

The usefulness of conventional fisheries science for long-term fisheries management and policies in the resource-poor islands of the Pacific is very limited. Fishery managers can, however, make use of such alternative sources of information as archaeological and historical data to develop fishery management initiatives. Most Pacific Islands were settled by humans over the last three millennia, although human settlement in Western Melanesia dates from the late Pleistocene, a period of about 40 millennia. Archaeological studies over the past half-century contain information on the long-term subsistence exploitation of fish and invertebrates from nearshore coral reefs and lagoons. Molluscs appear to have been a very important food source for early human colonists in the Pacific Islands, but declines in abundance through harvest pressure and environmental changes forced a greater reliance on fin-fish capture and on agriculture. There is no firm evidence from the archaeological record to suggest that long-term subsistence exploitation of reef fish populations has had any serious negative effects on abundance or structure of reef fish communities. Sources for more recent historical information are also exemplified and briefly examined for their usefulness in assessing the impacts of commercial fishing. It is argued that fishery managers who adopt a data-less approach to fishery management could profitably use these sources of information to enrich their assessment of the impacts of various management scenarios.     

Chevron Ridges and Runup Deposits in the Bahamas from Storms Late in Oxygen-Isotope Substage 5e

Landward-pointing V-shaped sand ridges several kilometers long are common along the windward margin of the Bahama Islands. Their axes share a northeast–southwest trend. Internally, the ridges contain low-angle oolitic beds with few erosional truncations. Commonly interbedded are tabular, fenestrae-rich beds such as those formed by the sheet flow of water over dry sand. Defined here as “chevron ridges,” these landforms appear to have originated in the rapid remobilization of bank margin ooid bodies by the action of long-period waves from a northeasterly source. Deposits along adjacent coastlines also preserve evidence of the impact of large waves. Reworked eolian sand bodies preserve beach fenestrae and hydraulic scour traces up to +40 m on older ridges. On cliffed coasts, 1000-ton boulders have been thrown well inland, recording the impact of large waves. Amino acid ratios confirm a correlation of the ridges across the archipelago, while stratigraphy, spacing, and cross-cutting relationships indicate emplacement as sea level fell rapidly from the substage 5e maximum at or above +6 m.     

Development of a Capillary Zone Electrophoretic Method for the Rapid Separation and Detection of Hepatotoxic Microcystins

Analysis of trace amounts of various hepatotoxic microcystins in marine and freshwater samples is very important since these toxins, especially microcystin-LR, have been demonstrated to have tumour-promoting activity. In this study, instead of measuring the total amount of microcystins, we developed a capillary zone electrophoretic method for the separation and detection of individual toxin standards. No additives were used for enhancement of resolution. This technique is characterized by a high separation efficiency, short analysis time and small sample volume. In order to improve the detection sensitivity, a laser-induced fluorescence detector was used, and the labelling of microcystins was accomplished through a two-step procedure. First, the microcystin standards were converted into cysteine conjugates, followed by derivatization with Fluorescein 5-Isothiocyanate (FITC). After derivatization, the FITC-labelled microcystins were directly injected, separated and detected in 8 min. This method was shown to be a promising technique for sensitive and rapid analysis of individual microcystin toxins.     

Quaternary volcanism near the Valley of Mexico: implications for subduction zone magmatism and the effects of crustal thickness variations on primitive magma compositions

The Valley of Mexico and surrounding regions of Mexico and Morelos states in central Mexico contain more than 250 Quaternary eruptive vents in addition to the large, composite volcanoes of Popocatépetl, Iztaccíhuatl, and Nevado de Toluca. The eruptive vents include cinder and lava cones, shield volcanoes, and isolated andesitic and dacitic lava flows, and are most numerous in the Sierra Chichináutzin that forms the southern terminus of the Valley of Mexico. The Chichináutzin volcanic field (CVF) is part of the E-W-trending Mexican Volcanic Belt (MVB), a subduction-related volcanic arc that extends across Mexico. The crustal thickness beneath the CVF (∼50 km) is the greatest of any region in the MVB and one of the greatest found in any arc worldwide. Lavas and scoriae erupted from vents in the CVF include alkaline basalts and calc-alkaline basaltic andesites, andesites, and dacites. Both alkaline and calc-alkaline groups contain primitive varieties that have whole rock Mg#, MgO, and Ni contents, and liquidus olivine compositions (≤Fo₉₀) that are close to those expected of partial melts from mantle peridotite. Primitive varieties also show a wide range of incompatible trace element abundances (e.g. Ba 210–1080 ppm; Ce 25–100 ppm; Zr 130–280 ppm). Data for primitive calc-alkaline rocks from both the CVF and other regions of the MVB to the west are consistent with magma generation in an underlying mantle wedge that is depleted in Ti, Zr, and Nb and enriched in large ion lithophile (K, Ba, Rb) and light rare earth (La, Ce) elements. Extents of partial melting estimated from Ti and Zr data are lower for primitive calc-alkaline magmas in the CVF than for those from the regions of the MVB to the west where the crust is thinner. The distinctive major element compositions (low CaO and Al₂O₃, high SiO₂) of the primitive calc-alkaline magmas in the CVF indicate a more refractory mantle source beneath this region of thick crust. In contrast, primitive alkaline magmas from the CVF and other regions of the MVB show compositional similarities to intraplate-type alkali basalts erupted behind the arc in the Mexican Basin and Range province. These similarities are consistent with the hypothesis that slab-induced convection in the mantle wedge beneath the MVB causes advection of asthenospheric mantle from behind the arc to the region of magma generation. Trace element systematics of primitive magmas in the MVB reveal substantial variability in both the extent of mantle wedge enrichment by subduction processes and in the composition of mantle heterogeneities that are related to previous extraction of alkaline to sub-alkaline basaltic melts. Received: 23 June 1998 / Accepted: 23 December 1998     

Behaviour of particle-laden flows into the ocean: experimental simulation and geological implications

The behaviour of subaerial particle-laden gravity currents (e.g. pyroclastic flows, lahars, debris flows, sediment-bearing floods and jökulhlaups) flowing into the sea has been simulated with analogue experiments. Flows of either saline solution, simple suspensions of silicon carbide (SiC) in water or complex suspensions of SiC and plastic particles in methanol were released down a slope into a tank of water. The excess momentum between subaerial and subaqueous flow is dissipated by a surface wave. At relatively low density contrasts between the tank water and the saline or simple suspensions, the flow mixture enters the water and forms a turbulent cloud involving extensive entrainment of water. The cloud then collapses gravitationally to form an underwater gravity current, which progresses along the tank floor. At higher density contrasts, the subaerial flow develops directly into a subaqueous flow. The flow slows and thickens in response to the reduced density contrast, which is driving motion, and then continues in the typical gravity current manner. Complex suspensions become dense flows along the tank floor or buoyant flows along the water surface, if the mixtures are sufficiently denser or lighter than water respectively. Flows of initially intermediate density are strongly influenced by the internal stratification of the subaerial flow. Material from the particulate-depleted upper sections of the subaerial flow becomes a buoyant gravity current along the water surface, whereas material from the particulate-enriched lower sections forms a dense flow along the tank floor. Sedimentation from the dense flow results in a reduction in bulk density until the mixture attains buoyancy, lifts off and becomes a secondary buoyant flow along the water surface. Jökulhlaups, lahars and debris flows are typically much denser than seawater and, thus, will usually form dense flows along the seabed. After sufficient sedimentation, the freshwater particulate mixture can lift off to form a buoyant flow at the sea surface, leading to a decoupling of the fine and coarse particles. Flood waters with low particulate concentrations (<2%) may form buoyant flows immediately upon entering the ocean. Subaerial pyroclastic flows develop a pronounced internal stratification during subaerial run-out and, thus, a flow-splitting behaviour is probable, which agrees with evidence for sea surface and underwater flows from historic eruptions of Krakatau and Mont Pelée. A pyroclastic flow with a bulk density closer to that of sea water may form a turbulent cloud, resulting in the deposition of much of the pyroclasts close to the shore. Dense subaqueous pyroclastic flows will eventually lift off and form secondary buoyant flows, either before or after the transformation to a water-supported nature.     

Dust injection into the Martian atmosphere

A mechanism for initiating global dust storms on Mars is proposed in which the diurnal variation of surface temperature results in the desorption of adsorbed CO₂, which under certain conditions can inject large amounts of fine (1–10 μm) dust into the atmosphere.     

Morphology of riffle–pool sequences in the River Severn,England

Despite the occurrence of riffle–pool sequences in many rivers there are few data concerning riffle–pool unit morphology. Of many criteria proposed to identify riffle–pool units, only three methods can be regarded as objective and robust. These are the ‘zero‐crossing’, the ‘spectral analysis’ and the ‘control‐point’ methods. In this paper statistics are developed using the first two of these methods to describe the streamwise morphology of 275 riffles and 285 pools which form a continuous 32·1 km reach of the bed of the River Severn in Shropshire, England. Yalin's theoretical relationship between the average riffle:pool unit length ( λ _p) and channel width ( W ), λ _p = 3 W , applies to the River Severn. Reach‐average riffle height ( H ) is a constant proportion of bankfull depth ( h ); typically H ≅ 0·16 h . Riffle height is a positive function of riffle length. Pool depth is a positive function of pool length. However, both riffle length and pool length increase more rapidly than the bed‐level amplitude, such that long riffles or pools are relatively ‘flat’. As channel gradient reduces, bedforms flatten and become more asymmetric as riffle stoss sides and the proximal slope of pools lengthen at the expense of riffle lee sides and pool distal slopes. The statistical relationships between riffle steepness (H/L) and water depth are similar to those for equilibrium subaqueous dunes. The Severn data are consistent with Yalin's theoretical analysis relating riffle bedform length (L _r) to water depth, i.e. L _r = α2π h, wherein α ≅ 1 for steep near‐equilibrium bedforms but α ≅ 2 to 3 as the relative depth decreases and riffles become long, low features. Theoretical consideration and turbulence data indicate that the frequency of coherent turbulent‐flow structures associated with the riffle–pool mixing length in the Severn should be of the order of 50 to 100 s. The morphological similarity of the steepest River Severn riffles with dunes raises intriguing questions with respect to self‐similar, convergent organization of periodic alluvial bedforms and to bedform dynamic classification particularly. Copyright © 2000 John Wiley & Sons, Ltd.     

Conditional heavy-tail behavior with applications to precipitation and river flow extremes

This article deals with the right-tail behavior of a response distribution \(F_Y\) conditional on a regressor vector \({\mathbf {X}}={\mathbf {x}}\) restricted to the heavy-tailed case of Pareto-type conditional distributions \(F_Y(y|\ {\mathbf {x}})=P(Y\le y|\ {\mathbf {X}}={\mathbf {x}})\), with heaviness of the right tail characterized by the conditional extreme value index \(\gamma ({\mathbf {x}})>0\). We particularly focus on testing the hypothesis \({\mathscr {H}}_{0,tail}:\ \gamma ({\mathbf {x}})=\gamma _0\) of constant tail behavior for some \(\gamma _0>0\) and all possible \({\mathbf {x}}\). When considering \({\mathbf {x}}\) as a time index, the term trend analysis is commonly used. In the recent past several such trend analyses in extreme value data have been published, mostly focusing on time-varying modeling of location or scale parameters of the response distribution. In many such environmental studies a simple test against trend based on Kendall’s tau statistic is applied. This test is powerful when the center of the conditional distribution \(F_Y(y|{\mathbf {x}})\) changes monotonically in \({\mathbf {x}}\), for instance, in a simple location model \(\mu ({\mathbf {x}})=\mu _0+x\cdot \mu _1\), \({\mathbf {x}}=(1,x)'\), but the test is rather insensitive against monotonic tail behavior, say, \(\gamma ({\mathbf {x}})=\eta _0+x\cdot \eta _1\). This has to be considered, since for many environmental applications the main interest is on the tail rather than the center of a distribution. Our work is motivated by this problem and it is our goal to demonstrate the opportunities and the limits of detecting and estimating non-constant conditional heavy-tail behavior with regard to applications from hydrology. We present and compare four different procedures by simulations and illustrate our findings on real data from hydrology: weekly maxima of hourly precipitation from France and monthly maximal river flows from Germany.     

Effect of surface wave propagation in a four-layered oceanic crust model

Dispersion of Rayleigh type surface wave propagation has been discussed in four-layered oceanic crust. It includes a sandy layer over a crystalline elastic half-space and over it there are two more layers—on the top inhomogeneous liquid layer and under it a liquid-saturated porous layer. Frequency equation is obtained in the form of determinant. The effects of the width of different layers as well as the inhomogeneity of liquid layer, sandiness of sandy layer on surface waves are depicted and shown graphically by considering all possible case of the particular model. Some special cases have been deduced, few special cases give the dispersion equation of Scholte wave and Stoneley wave, some of which have already been discussed elsewhere.     

Generalised formulation of composite filters and their application to earthquake engineering test systems

This paper addresses the problem of generating unmeasured kinetic data—and/or providing improvements in existing data—for the enhancement of performance characteristics of earthquake engineering test systems, such as shaking tables, reaction walls and other custom‐made test rigs. The approach relies upon the use of composite filters (CF), a method of data fusion that was originally conceived via transfer function formulation. The current work generalises the CF concept and extends its formulation into the state‐space domain, thereby providing a wider basis for application to test systems and their controllers, including those of a multivariable (coupled, multi‐axis) nature. Comparative simulation studies of shaking table control are presented that demonstrate the design techniques for state‐space CF and also their effectiveness for signal synthesis, noise suppression and performance improvement. Specific examples include the use of CF for displacement demand signal generation, velocity feedback generation and acceleration control. In each case, the essential principles behind CF—output signals with zero bias and zero drift—are consistently upheld. Copyright © 2017 John Wiley & Sons, Ltd.