Egg production of Calanus finmarchicus—A basin-scale study

Egg production of Calanus finmarchicus was studied during joint basin-scale surveys in April–June 2003 in the Norwegian Sea. Surveys covered the whole Norwegian Sea and were conducted from Norwegian, Icelandic and Faroese research vessels. Stations were classified as being in pre-bloom, bloom or post-bloom phase according to levels of chlorophyll a and nitrate. Individual egg production rates and population egg production rates were calculated and compared between areas. Both individual egg production rates (eggs female⁻¹ day⁻¹) and population egg production rates (eggs m⁻² day⁻¹) were significantly higher in bloom areas compared with pre-bloom and post-bloom areas. However, when integrated over an estimated duration of the three phases, the time-integrated egg production (eggs m⁻²) in most years was highest in the pre-bloom phase, and this was explained by the longer duration of this phase compared with the two other phases.     

Developing a Marine Information System by Integrating Existing Ocean Models Using Object-Oriented Technology

Information systems developed for different applications within the environmental domain have common characteristics, which can potentially be abstracted for sharing and reuse of design and software modules. This article presents an approach to designing for reuse by abstracting commonalities in the design of a Marine Information System (MIS), facilitating data management in a prototype operational monitoring, forecasting, and management system for the North Atlantic and the Nordic Seas. A detailed study of the requirements and data analysis was carried out, and Object-Oriented Technology (OOT) is employed to encapsulate abstractions and to promote reuse of code and design. This article identifies the Object-Oriented Frameworks (OOFW) required to build the MIS. It also provides guidelines to environmental scientists for restructuring legacy software and employing modern programming techniques.     

Management of a shallow temperate estuary to control eutrophication: The effect of hydrodynamics on the system’s nutrient loading

The Mondego estuary, a shallow warm-temperate intertidal system located on the west coast of Portugal, has for some decades been under severe ecological stress, mainly caused by eutrophication. Water circulation in this system was, until 1998, mainly dependent on tides and on the freshwater input of a small tributary artificially controlled by a sluice. After 1998, the sluice opening was effectively minimised to reduce the nutrient loading, and the system hydrodynamics improved due to engineering work in the upstream areas. The objective of the present study was to evaluate the effect of the mitigation measures implemented in 1998. Changes to the hydrodynamics of the system were assessed using precipitation and salinity data in relation to the concentrations of dissolved inorganic nutrients, as well as the linkage between dissolved N:P ratios and the biological parameters (phytoplankton chlorophyll a concentrations, green macroalgal biomass and seagrass biomass). Two distinctive periods were compared, over a ten year period: from January 1993 to January 1997 and from January 1999 until January 2003. The effective reduction in the dissolved N:P atomic ratio from 37.7 to 13.2 after 1998 is a result of lowered ammonia, but not the oxidised forms of nitrogen (nitrate plus nitrite), or increased concentrations of dissolved inorganic phosphorus. Results suggest that the phytoplankton is not nutrient limited, yet maximum and mean biomass of green macroalgae was reduced by one order of magnitude after the mitigation measures. This suggests that besides lowering the water residence time of the system, macroalgal growth became nitrogen limited. In parallel to these changes the seagrass-covered area and biomass of Zostera noltii showed signs of recovery.     

Longitudinal strength of a high-speed ferry

The longitudinal strength of the high-speed ferry was investigated by subjecting the ship's hull girder to long-term loads obtained from a frequency-domain panel code. Prior to the statistical analysis, linearly computed transfer functions were corrected for nonlinear effects, yielding two sets of transfer functions valid for different wave amplitudes. One set corresponded to the hogging condition; the other set, to the sagging condition. Two regular equivalent design waves were specified that resulted in loads representing the most severe global design load conditions. The still-water loading condition, yielding a still-water vertical bending moment in hogging, was superimposed on the wave-induced loads to obtain the total (design) loads in hogging. For the sagging condition only, additional impact-related loads were superimposed to obtain the total (design) loads in sagging. A finite element model of the ship's structure was subjected to pressure distributions according to the two regular design waves. For comparison with classification society rule values, a simple beam theory strength analysis of the ship's midship section was performed first, and then another finite element analysis was carried out, whereby the imposed loads were tuned to the rule values of vertical bending moments. Rule-based magnitudes of nominal maximum longitudinal stress deviated significantly (25–39%) from comparable stresses obtained by the panel code based finite element analysis. However, stresses obtained from the rule-based finite element analysis agreed more favorably, especially in hogging. In the uppermost deck, for example, the panel code based compressive stress was only 9% larger than the comparable stress from the rule-based finite element analysis.     

Simulating a heavy metal spill under estuarine conditions: Effects on the clam Scrobicularia plana

We describe the effect of heavy metals Zn, Cd, Pb and Cu on the induction of methallothioneins on the clam Scrobicularia plana along a salinity gradient simulated under laboratory conditions. The clams were exposed to constant heavy metal concentrations in a dynamic estuary simulator during a 15-day assay to investigate possible induction of metal-binding proteins in them. The concentration of heavy metals in water was analysed. Clams were analysed for methallothionein concentrations. The speciation of Zn, Cd, Pb and Cu along the salinity gradient was modelled. Zn showed the highest concentrations and its prevalent species was the free ion. Intersite differences have been observed in methallothionein concentration and related to the salinity gradient. It seems that synthesis of methallothioneins is the result of physiological forces acting in concert with the changes in the chemical speciation of metals, owing to the trace metals uptake is controlled by means of an interaction of physiology and physicochemistry.     

Dynamic properties of green water event in the overtopping of extreme waves on a fixed dock

A statistical model is developed to predict wave overtopping volume and rate of extreme waves on a fixed deck. The probability density function for the volume and rate of overtopping water are formulated based on the truncated Weibull distribution with the assumption of local sinusoidal profile for small amplitude waves. Sensitivity to the wave nonlinearity parameter and deck clearance is discussed. The statistical model is compared to laboratory data of the instantaneous free surface elevation measured in front of a fixed deck, and overtopping volume and overtopping rate measured at the leading edge of the deck. The statistical theory compared well with the measured exceedance probability seaward of the deck. The model prediction of the exceedance probability of deck overtopping gave qualitatively good agreement for large overtopping values.     

Observed foundation behaviour of concrete gravity platforms installed in the North Sea 1973–1978

Available measurements of foundation behaviour of the 13 concrete gravity platforms installed in the North Sea in the years 1973–1978 are presented. The measurements cover both the installation phase and the early part of the operation period. For the installation phase, measurements of dowel and skirt penetration resistance, base contact stresses, tilt, piping and erosion, are presented. For the operation period, the presentation includes measurements of settlements, pore water pressures, base contact stresses, permanent lateral displacements, cyclic displacements, dynamic behaviour and erosion. The measurements are used to back calculate soil properties and to evaluate the adequacy of the design procedures which have been used. The observations give valuable experience with respect to the foundation performance of offshore gravity platforms.     

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.