Improved in situ gamma-ray transmission densitometer for marine sediments

The first-generation University of Illinois gamma-ray transmission densitometer, designed for the in situ measurement of sediment bulk density, was modified by incorporating in the detector probe (1) an Americium-241 alpha particle pulser and an anti-walk gain stabilization control to maintain better temperature stability and (2) a small power supply and a IC preamplifier to eliminate the need for a high-voltage coaxial cable between the detector and external signal conditioning electronics package. This second-generation Lehigh University system has been successfully deployed since 1971 in routine use from ships and submersibles in the Atlantic and Pacific Oceans and the Gulf of Mexico. Results are presented of system operations to (1) measure bulk density over the range of 1.2–1.8 Mg/m³ in the Hudson Canyon, (2) penetrate 1.9 m into the seafloor in the San Diego trough and, (3) be lowered to a water depth of 3.6 km in the Gulf of Mexico.     

Transverse vibrations of a rectangular cantilever plate with thickness varying in a discontinuous fashion

A numerical solution is obtained for the title problem by means of the popular finite element method. An experimental investigation of the problem is also presented for plates of square planform. The agreement between theoretical and experimental values is very good in the case of the fundamental frequency, and reasonably good when the second and third normal modes of transverse vibration are considered. It is concluded that beneficial effects are obtained in the sense that one generates a lighter structural element with higher fundamental frequency of transverse vibration. Hence, dynamic stiffening is achieved.     

Experimental investigation of the combustive sound source

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source     

Time-domain simulation of large-amplitude response of floating platforms

Two numerical simulation models to predict large-amplitude motions of floating platforms are presented. The first method is based on the application of the relative-velocity formulation of Morison's equation for force calculations. The second method developed in this work uses the three-dimensional potential theory in time domain. In this method, both the Froude-Krylov and scattering forces are calculated by considering finite wave amplitude effects in random waves. The effect of various nonlinearities on the low-frequency motions and high-frequency tether-tension response of a tension leg platform are studied using these simulation models in conjunction with power spectral methods. The presence of current and the nonlinear drag force are observed to have a significant effect on the low-frequency motions and tether tensions.     

The directional radiation of long waves from bottom deformations of finite duration

The process of generation of two-dimensional (2D) wave motions during small elliptical displacements of the bottom which occur for a finite time interval is considered within the framework of the linear theory of long waves in a basin of constant depth. The spatial structure and the amplitudinal and energy characteristics of the emerging directional surface wave are analysed for bottom deformations of a special form.Translated by Mikhail M. Trufanov.     

The study of intermittent hydrophysical fields in the vicinity of the frontal zone

CTD data provided by the MGI-4204 and MARK-III probes are used to study the quasistationary subpolar front structure in the north-western Sea of Japan. In order to provide further insights into the intermittent scalar hydrophysical fields, the method of inhomogeneity identification using temperature pulsations calculated by the moving interval is suggested. The experimentally-derived inhomogeneity distribution is satisfactorily approximated by the exponential law.Translated by V. Puchkin.     

Geochemistry of suspended matter from the Baltic Sea 2. Results of bulk trace metal analysis by AAS

In 1984, on a transect covering the whole Baltic Sea and parts of the adjacent North Sea, 160 water samples were taken and analysed for their concentrations of particulate and dissolved metals. In addition, the suspended materials were investigated for their elemental bulk composition.The particulate fractions represented from about 5% (Cd, Cu and Ni) to 50% (Fe and Pb) of the total (particulate plus dissolved) concentrations. For some elements (Ba, Cd, Cu, Pb and Zn), the particulate matter from the surface microlayer was enriched with respect to those suspended materials taken from 0.2 m depth. This could reflect the atmospheric input of metal-rich aerosols. In anoxic deep waters, maximum contents of Zn (6400 μg g⁻¹), Cu (1330 μg g⁻¹) and Cd (12 μg g⁻¹) were observed in the particulate matter, indicating sulphidic forms. On the other hand, under oxic conditions the distribution coefficients (K_d) decreased with the water depth (Cd, Fe and Pb).Relative to global background levels, the particulate matter contained metal “excesses” amounting to more than 90% of the total contents (Cd, Mn, Pb and Zn). Automated electron probe X-ray microanalysis (EPXMA) revealed that the elemental composition of sediments is mainly governed by post-depositional processes of early diagenesis and is only weakly related to the composition of suspended matter in the overlying water body. For instance, in relation to surface mud sediments of the central Baltic net-sedimentation basins, Zn, Cd, Cu and Mn had 30–100% higher levels in the suspended materials. The general pattern of metal contents of particulate matter taken from 10 m depth on a transect between the Bothnian Bay and the North Sea were—possibly as a result of anthropogenic inputs—rather similar for Pb, Zn and Cu. For Fe and Mn, the distribution patterns along the transect were probably governed by the natural loading characteristics and by the biogeochemistry of those elements.