Effects of organochlorine compounds on cytochrome P450 aromatase activity in an immortal sea turtle cell line

Many classes of environmental contaminants affect the reproductive function of animals through interactions with the endocrine system. The primary components affected by endocrine active compounds (EACs) are the steroid receptors and the enzymes responsible for steroidogenesis. This study sought to develop an in vitro model for assessing EAC effects in sea turtles by examining their ability to alter cytochrome P450 aromatase (CYP19) activity. Aromatase is the enzyme responsible for the conversion of testosterone to estradiol. This enzyme is critical in the sexual differentiation of reptiles which demonstrate temperature-dependent sex determination. An immortal testis cell line GST-TS from a green sea turtle was grown in culture at 30 degrees C in RPMI 1640 media. The cells were exposed to three known aromatase inducers; dexamethasone (Dex), 8Br-cyclic AMP, or human chronic gonadotropin (HCG) and one aromatase inhibitor 4-androstenol-dione (4-OHA). In addition, the GST-TS cells were exposed to 0.1-30 microM atrazine and 3-100 microM 4,4'-DDE. The inducing compounds that have been shown to increase aromatase activity in other systems failed to induce aromatase activity in the GST-TS cells, yet exposure to the inhibiting compound, 4-OHA, did result in a significant reduction. Atrazine (0.1, 1.0 and 10 microM) significantly induced aromatase activity following a 24 h exposure, and 4,4'-DDE inhibited the activity but only at cytotoxic concentrations (100 microM). Based on these results, this in vitro model can be useful in examining the endocrine effects of EACs in sea turtles.     

The GEM project: An international collaboration to survey galactic radiation emission

The GEM (Galactic Emission Mapping) project is an international collaboration established with the aim of surveying the full sky at long wavelengths with a multi-frequency radio telescope. A total of 745 hours of observation at 408 MHz were completed from an Equatorial site in Colombia. The observations cover the celestial band 0 ^h <<24 ^h , and –24° 22<<+35° 37. Preliminary results of this partial survey will be discussed. A review of the instrumental setup and a 10° resolution sky map at 408 MHz is presented.Presented by S. Torres at the UN/ESA Workshop on Basic Space Sciences: From Small Telescopes to Space Missions, Colombo, Sri Lanka 11–14 January 1996     

An observational study of coronal hole rotation over the sunspot cycle

An analysis of the rotation of coronal holes (CHs) spanning 18 years was done based on data from theCatalogue of Coronal Holes (Sanchez-Ibarra and Barraza-Paredes, 1992). A differential rotation of CHs is confirmed for the totality of CHs, but a different behavior was found when those were separated as equatorial or isolated, and polar hole extensions, such as in theCatalogue. Isolated CHs show a typical differential rotation, but polar hole extensions display two different types of behavior: a rotation rate below 40° ± 5° of heliographic latitude, increasing to the equator, and a rotation rate above the same heliographic latitude but increasing to the poles. Also discussed here is how this last result agrees with other studies that indicate the mostly rigid rotation of the corona at higher latitudes.     

The behavior of trace elements during schwertmannite precipitation and subsequent transformation into goethite and jarosite

Schwertmannite is a ubiquitous mineral formed from acid rock drainage (ARD), and plays a major role in controlling the water chemistry of many acid streams. The formation of schwertmannite was investigated in the acid discharge of the Monte Romero abandoned mine (Iberian Pyrite Belt, SW, Spain). Schwertmannite precipitated from supersaturated solutions mainly owing to the oxidation of Fe(II) to Fe(III) and transformed with time into goethite and jarosite. In a few hours, schwertmannite precipitation removed more than half of the arsenic load from solution, whereas the concentration of divalent trace metals (Zn, Cu, Pb, Cd, Ni, and Co) remained almost unchanged. In the laboratory, natural schwertmannite was kept in contact with its coexisting acid water in a flask with a solid-liquid mass ratio of 1:5 for 353 days. During this time, the pH of the solution dropped from 3.07 to 1.74 and the concentrations of sulfate and Fe increased. During the first 164 days, schwertmannite transformed into goethite plus H₃O-jarosite but, subsequently, goethite was the only mineral to form. Some of the trace elements, such as Al, Cu, Pb, and As were depleted in solution during the first stage as schwertmannite transformed into goethite plus H₃O-jarosite. On the contrary, the transformation of schwertmannite to goethite (with no jarosite) during the second stage released Al, Cu, and As to the solution. Despite the variation in their concentrations in solution, approximately 80% of the total Al and Cu inventories and more than 99% As and Pb remained in the solid phase throughout the entire aging process.     

Natural attenuation and bioremediation of Prestige fuel oil along the Atlantic coast of Galicia (Spain)

Heavy fuel oil spilled from the oil tanker Prestige in November 2002 affected hundreds of km of Spanish shoreline. We carried out a two year study at two highly contaminated sites in order to monitor natural attenuation of the residues coating shore rocks and to test the effectiveness of bioremediation with an oleophilic fertilizer (S200). The methodology included an innovative approach for oil load calculation (based on image analysis techniques), the analysis of the fate of hydrocarbons by means of chemical biomarkers and different microbiological techniques for isolating and examining hydrocarbon degraders.Considerable hydrocarbon depletion from shorelines (≈100% for light-medium linear alkanes and ≈35% for aromatics such as pyrene) was observed within the first months after the spill. However, this natural attenuation effect dramatically slowed down in the following year, although partial enhancement (especially for the aromatic fraction) was attained as a result of the application of S200 to stimulate indigenous microorganisms. In addition, one of the main outcomes of this work concerns the remarkable hydrocarbon depletion achieved at points where fresh water flowed through the shore rocks. The study of samples collected where this natural attenuation phenomenon took place made it possible to isolate heterotrophic bacteria and fungi that are likely to cooperate with cyanobacteria in hydrocarbon biodegradation. The overall results strongly advocate the implementation of new bioremediation approaches, including alternatives such as the use of natural fresh water to irrigate polluted areas.     

Geophysical methods applied to fault characterization and earthquake potential assessment in the Lower Tagus Valley, Portugal

The study region is located in the Lower Tagus Valley, central Portugal, and includes a large portion of the densely populated area of Lisbon. It is characterized by a moderate seismicity with a diffuse pattern, with historical earthquakes causing many casualties, serious damage and economic losses. Occurrence of earthquakes in the area indicates the presence of seismogenic structures at depth that are deficiently known due to a thick Cenozoic sedimentary cover. The hidden character of many of the faults in the Lower Tagus Valley requires the use of indirect methodologies for their study. This paper focuses on the application of high-resolution seismic reflection method for the detection of near-surface faulting on two major tectonic structures that are hidden under the recent alluvial cover of the Tagus Valley, and that have been recognized on deep oil-industry seismic reflection profiles and/or inferred from the surface geology. These are a WNW–ESE-trending fault zone located within the Lower Tagus Cenozoic basin, across the Tagus River estuary (Porto Alto fault), and a NNE–SSW-trending reverse fault zone that borders the Cenozoic Basin at the W (Vila Franca de Xira–Lisbon fault). Vertical electrical soundings were also acquired over the seismic profiles and the refraction interpretation of the reflection data was carried out. According to the interpretation of the collected data, a complex fault pattern disrupts the near surface (first 400 m) at Porto Alto, affecting the Upper Neogene and (at least for one fault) the Quaternary, with a normal offset component. The consistency with the previous oil-industry profiles interpretation supports the location and geometry of this fault zone. Concerning the second structure, two major faults were detected north of Vila Franca de Xira, supporting the extension of the Vila Franca de Xira–Lisbon fault zone northwards. One of these faults presents a reverse geometry apparently displacing Holocene alluvium. Vertical offsets of the Holocene sediments detected in the studied geophysical data of Porto Alto and Vila Franca de Xira–Lisbon faults imply minimum slip rates of 0.15–0.30 mm/year, three times larger than previously inferred for active faults in the Lower Tagus Valley and maximum estimates of average return periods of 2000–5000 years for M 6.5–7 co-seismic ruptures.     

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.     

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.