Large-Eddy Simulation of Thermally Stratified Atmospheric Boundary-Layer Flow Using a Minimum Dissipation Model

A generalized form of a recently developed minimum dissipation model for subfilter turbulent fluxes is proposed and implemented in the simulation of thermally stratified atmospheric boundary-layer flows. Compared with the original model, the generalized model includes the contribution of buoyant forces, in addition to shear, to the production or suppression of turbulence, with a number of desirable practical and theoretical properties. Specifically, the model has a low computational complexity, appropriately switches off in laminar and transitional flows, does not require any ad hoc shear and stability corrections, and is consistent with theoretical subfilter turbulent fluxes. The simulation results show remarkable agreement with well-established empirical correlations, theoretical predictions, and field observations in the atmosphere. In addition, the results show very little sensitivity to the grid resolution, demonstrating the robustness of the model in the simulation of the atmospheric boundary layer, even with relatively coarse resolutions.     

An analytical solution for stresses induced by a post-tensioned anchor in rocks containing two perpendicular joint sets

A new analytical approach for the analysis of stress around a post-tensioned anchor in rock with two perpendicular joint sets is presented. The solution considers nonlinear shear stresses developed along the anchor bond length as well as debonding at the tendon–grout interface. The bearing plate effects are also considered in the analyses. The following assumptions are made: (1) homogeneous and orthotropic elastic rock; (2) half-space rock mass with plane strain conditions; (3) trilinear bond-slip model for the behavior of the tendon–grout interface; (4) an elastic anchor. The employed methodology is to decompose the anchor problem into two problems of simpler loadings: stresses produced under a rigid bearing plate and stresses induced by interfacial shear stresses mobilized along the bond length. Based on the proposed solution, an illustrative example is given and the results show that a large compressive region is formed around the anchor free length. Tensile stress concentrations are also observed around the bond length and near the rock surface outside the bearing plate. A parametric study is also conducted to investigate the effects of joint properties on the induced stresses. The results show that as the number of joints intersecting the anchor axis increases, the magnitude of compressive stresses in the free zone decreases, while the size of compression zone around the anchor increases. To verify the results of the analytical approach, a comparison is made with numerical results obtained by using the finite element method. The analytical solutions compare very well with the results obtained by numerical method.     

Compounding effects of human activities and climatic changes on surface water availability in Iran

Climatic Change - By combining long-term ground-based data on water withdrawal with climate model projections, this study quantifies the compounding effects of human activities and climate change...     

Computational hydrodynamic analysis of the propeller–rudder and the AZIPOD systems

A computational method has been developed to predict the hydrodynamic performance of the propeller–rudder systems (PRS) and azimuthing podded drive (AZIPOD) systems. The method employs a vortex-based lifting theory for the propeller and the potential surface panel method for the steering system. Three propeller models along with three steering systems (rudder and strut, flap and pod (SFP)) are implemented in the present calculations for the cases of uniform and non-uniform conditions. Computed velocity components show good agreement with the experimental measurements behind a propeller with or without the rudder. Calculated thrust, torque and lift also agree well with the experimental results. Computations are also performed for an AZIPOD system in order to obtain the pressure distributions on the SFP, and the hydrodynamic performance (thrust, torque and lift coefficients). The present method is useful for examining the performance of the PRS and AZIPOD systems in the hope of estimating the propulsion and the maneuverability characteristics of the marine vehicles more accurately.     

Correction to: New climatic zones in Iran: a comparative study of different empirical methods and clustering technique

Theoretical and Applied Climatology -     

The origin of oil in the Cretaceous succession from the South Pars Oil Layer of the Persian Gulf

The origin of the oil in Barremian–Hauterivian and Albian age source rock samples from two oil wells (SPO-2 and SPO-3) in the South Pars oil field has been investigated by analyzing the quantity of total organic carbon (TOC) and thermal maturity of organic matter (OM). The source rocks were found in the interval 1,000–1,044 m for the Kazhdumi Formation (Albian) and 1,157–1,230 m for the Gadvan Formation (Barremian–Hauterivian). Elemental analysis was carried out on 36 samples from the source rock candidates (Gadvan and Kazhdumi formations) of the Cretaceous succession of the South Pars Oil Layer (SPOL). This analysis indicated that the OM of the Barremian–Hauterivian and Albian samples in the SPOL was composed of kerogen Types II and II–III, respectively. The average TOC of analyzed samples is less than 1 wt%, suggesting that the Cretaceous source rocks are poor hydrocarbon (HC) producers. Thermal maturity and Ro values revealed that more than 90 % of oil samples are immature. The source of the analyzed samples taken from Gadvan and Kazhdumi formations most likely contained a content high in mixed plant and marine algal OM deposited under oxic to suboxic bottom water conditions. The Pristane/nC₁₇ versus Phytane/nC₁₈ diagram showed Type II–III kerogen of mixture environments for source rock samples from the SPOL. Burial history modeling indicates that at the end of the Cretaceous time, pre-Permian sediments remained immature in the Qatar Arch. Therefore, lateral migration of HC from the nearby Cretaceous source rock kitchens toward the north and south of the Qatar Arch is the most probable origin for the significant oils in the SPOL.     

Ascribing soil erosion types for sediment yield using composite fingerprinting technique

Abstract

Soil erosion and eroded sediment are serious threats to sound land management. However, less attention has been given to quantifying the importance of different soil erosion features based on appropriate control measures that could be designated. Accordingly, this research was planned to quantify the contribution of potential sediment sources, i.e. sheet, rill and gully erosion, in Idelo watershed in Zanjan Province, Iran, using composite fingerprinting. Toward this aim, 16 geochemical and organic tracers were detected in sediment sources and sediment deposited at the outlet. The results of applying the composite fingerprinting technique, with a relative error of 16%, showed that sheet, rill and gully sources contributed 56%, 44% and 0%, respectively, to sediment yield. It was also apparent from the results that the composite fingerprinting approach could be successfully utilized to assess the provenance of sediment deposited at the main outlet of the study watershed by soil erosion type.

Editor Z.W. Kundzewicz     

Extracting of prospective groundwater potential zones using remote sensing data,GIS, and a probabilistic approach in Bojnourd basin,NE of Iran

Various groundwater potential zones for the assessment of groundwater availability in the Bojnourd basin have been investigated using remote sensing, GIS, and a probabilistic approach. Five independent groundwater factors, including topography, ground slope, stream density, geology units, lineament density, and a groundwater productivity factor, i.e., springs’ discharge, were applied. Discharge rates of 226 springs over the area were collected, and the probabilistic model was designed by the discharge rates of springs as the dependent variable. For training the probabilistic model, a ratio of 70/30% of springs’ discharge was applied and discharge rates of 151 springs were selected to randomly train the model. The frequency ratio for each factor was calculated, and the groundwater potential zones were extracted by summation of frequency ratio maps. The groundwater potential map was also classified into four classes, viz., “very good” (with a frequency ratio of >6.75), “good” (5.5FR6.75), “moderate” (4.75FR5.5), and “poor” (FR4.75). Then, the model was verified based on a success-rate curve method which resulted in obtaining an accuracy ratio of 75.77%. Finally, sensitivity analysis was applied by a factor removal method in five steps. Results reveal that topography factor has the biggest effect on the groundwater potential map and removing this factor eventuates in the lowest accuracy of the final map (AUC = 63. 73%). The groundwater potential map is fairly affected by removing the lineament density factor with an accuracy of 68.80%. Removing the lineament density factor has the lowest effect on the final map with accuracy of 68.80%.     

Description and validation of the atmosphere–land–surface interaction scheme (ALSIS) with HAPEX and Cabauw data

A new land surface parameterization scheme (ALSIS), with emphasis on soil moisture prediction, is described and validated with observations from HAPEX-MOBILHY and Cabauw. An important feature of the scheme is the inclusion of vertical heterogeneity of soil hydraulic parameters is modelling unsaturated flow. The simulated soil moisture for HAPEX site using a vertically homogeneous soil has a positive bias in the upper soil layers and a negative bias in the deep soil layers. Taking into account the soil vertical heterogeneity greatly eliminates this discrepancy and results in an excellent agreement between annual cycles of modelled and observed soil moisture profiles. The mean annual soil moisture in the top 1.6 m of soil increased from 394 mm for homogeneous case to 433 mm for the heterogeneous case, consistent with 435 mm observed. The improvement in soil moisture simulation resulted in an improved skill in predicting the mean and the diurnal cycles of surface fluxes for the intensive observational period (28 May–3 July). The simulated monthly averages of surface temperature and fluxes follow observations over the year, except for January when the model overestimates the latent heat flux due to its failure in simulating high rates of dew fall. The deviation of modelled monthly mean surface fluxes from observations are well within the estimated observational errors. The simulated mean daily surface temperature, and surface fluxes are generally consistent with observations, except for some times in the winter period. The modelled diurnal cycles of temperature and fluxes are in agreement with those observed. However, the model overestimates the night-time latent heat flux, especially during January.