Correction to: Geochemical Prospectivity Mapping Through a Feature Extraction–Selection Classification Scheme

Natural Resources Research - The original version of this article unfortunately contained a mistake in the second part of Table 3. The data in last four rows of Table 3, i.e.,...     

Use of magnetic measures to assess soil redistribution following deforestation in hilly region

Limited information is available about the use of magnetic susceptibility property to determine soil redistribution in hilly areas of the semi-arid regions. This study was conducted to evaluate the use of magnetic properties to determine soil redistribution along a hill slope following deforestation. The study area is located in the Quaternary hilly region of Lordegan district in west Iran. Ten transects were established in two land uses that included natural Querqus forested and cultivated lands. Soil samples were collected at different positions along the slope and magnetic properties (χlf, χhf, SIRM, ARM, and χfd) and selected physico-chemical properties were determined. The results (based on the χfd, SIRM/ARM) showed that the magnetic susceptibly in the calcareous materials is pre-dominantly derived during the pedogenic processes and the superparamagnetic particles which were transported to lower positions of hill slope following deforestation. The results confirmed that this methodology could be applied for monitoring soil redistribution along the slope in calcareous hilly areas in the semi-arid regions.     

Field Study of Vertical Screening Distance Criteria for Vapor Intrusion of Ethylene Dibromide

Several regulatory agencies recommend screening petroleum vapor intrusion (PVI) sites based on vertical screening distance between a petroleum hydrocarbon source in soil or groundwater and a building foundation. U.S. Environmental Protection Agency (U.S. EPA) indicate the risk of PVI is minimal at buildings that are separated by more than 6 feet (1.8 m) from a dissolved-phase source and 15 feet (4.6 m) from a light nonaqueous phase liquid (LNAPL) source. This vertical screening distance method is not, however, recommended at sites with leaded gasoline sources containing ethylene dibromide (EDB) because of a lack of field data to document EDB attenuation in the vadose zone. To help address this gap, depth-discrete soil-gas samples were collected at a leaded gasoline release site in Sobieski, Minnesota (USA). The maximum concentration of EDB in groundwater (175 μg/L) at the site was high relative to those observed at other leaded gasoline release sites. Soil gas was analyzed for EDB using a modification of U.S. EPA Method TO-14A that achieved analytical detection limits below the U.S. EPA Vapor Intrusion Screening Level (VISL) for EDB based on a 10⁻⁶ cancer risk (<0.16 μg/m³). Concentrations of EDB in soil gas above LNAPL reached as high as 960 μg/m³ and decreased below the VISL within a source-separation distance of 7 feet. This result coupled with BioVapor model predictions of EDB concentrations indicate that vertical screening distances recommended by regulatory agencies at PVI sites are generally applicable for EDB over the range of anticipated source concentrations and soil types at most sites.     

Validation and calibration of solar radiation equations for estimating daily reference evapotranspiration at cool semi-arid and arid locations

ABSTRACT

In this work, the applicability of 12 solar radiation (R_S) estimation models and their impacts on daily reference evapotranspiration (ET_o) estimates using the Penman‐Monteith FAO-56 (PMF-56) method were tested under cool arid and semi-arid conditions in Iran. The results indicated that the average increase in accuracy of the ET_o estimates by the calibrated R_S models, quantified by the decrease in RMSE, was 2.8% and 6.4% for semi-arid and arid climates, respectively. Mean daily deviations in the estimated ET_o by the calibrated R_S equations in semi-arid climates varied from ?0.283?mm/d^-1 for the Glover‐McCulloch model to 0.080?mm/d for the El-Sebaii model, with an average of ?0.109?mm/d^-1, and in arid climates, they ranged from ?0.522?mm/d^-1 for the Samani model to 0.668?mm/d for the El-Sebaii model, with an average of 0.125?mm/d^-1.

Editor D. Koutsyiannis; Associate editor Not assigned     

The Bam Earthquake of 26 December 2003

The devastating earthquake of 26 December 2003 claimed more than 26,000 lives in the city of Bam and surrounding towns and villages in Southeast Iran, and left the majority of the Bam population homeless. The reason for this tragedy was an unfortunate combination of geological, social and human circumstances. The causative fault practically traversed the city of Bam and the earthquake occurred at a shallow depth. The residential buildings were completely inappropriate for a seismic region, being extremely vulnerable to earthquake shaking, and the earthquake occurred early in the morning when most people were still sleeping. The damage pattern was nearly symmetric about a line 3 km to the west of the surface expression of the Bam fault, and the damage attenuated rapidly with distance from this line. The industrial facilities and the lifelines performed relatively well and experienced slight to moderate damage, but this might have been due to their distance from the earthquake epicentre. However, many of the qanat (traditional subterranean irrigation channels) chains that served the twin cities of Bam and Baravat collapsed. Emergency facilities (hospitals, police and fire stations), schools and the university were destroyed and/or heavily damaged during the earthquake. The geotechnical effects of the earthquake were not significant. There was little evidence that site response effects played a major role in the damage pattern in the city. There were no reports of liquefaction and only minor sliding activity took place during the event. A unique set of strong motion acceleration recordings were obtained at the Bam accelerograph station. The highest peak ground acceleration (nearly 1g) was recorded for the vertical component of the motion. However, the longitudinal component (fault-parallel motion in N–S direction) clearly had the largest energy flux, as well as the largest maximum velocity and displacement.     

The mineralogy and petrology of the Pahnavar Fe skarn, In the Eastern Azarbaijan, NW Iran

The Pahnavar calcic Fe-bearing skarn zone is located in the Eastern Azarbaijan (NW Iran). This skarn zone occurs along the contact between Upper Cretaceous impure carbonates and an Oligocene granodioritic batholith. The skarnification process can be categorized into two discrete stages: prograde and retrograde. The prograde stage began immediately after the initial emplacement of the granodioritic magma into the enclosing impure carbonate rocks. The effect of heat flow from the batholith caused the enclosing rocks to become isochemically marmorized in the pure limestone layers and bimetasomatized (skarnoids) in the impure clay-rich carbonates. Segregation and evolution of an aqueous phase from the magma that infiltrated to the marbles and skarnoids through fractures and micro-fractures took place during the emplacement of magma. The influx of Fe, Si and Mg from the granodiorite to the skarnoids and marbles led to the crystallization of anhydrous calc-silicates (garnet and pyroxene). The retrograde stage can be divided, in turn, into two distinct sub-stages. During earliest sub-stage, the previously formed skarn assemblages were affected by intense hydro-fracturing; in addition, Cu, Pb, Zn, along with H₂S and CO₂ were added. Consequently, hydrous calc-silicates (epidote and tremolite-actinolite), sulfides (pyrite, chalcopyrite, galena and sphalerite), oxides (magnetite and hematite) and carbonates (calcite) deposited the anhydrous calc-silicates. The late-retrograde sub-stage was due the incursion of colder oxidizing fluids into the skarn system, causing the alteration of the previously formed calc-silicate assemblages and the development of fine-grained aggregates of chlorite, illite, kaolinite, hematite and calcite. The lack of wollastonite in the mineral assemblage, along with the garnet-clinopyroxene paragenesis, suggests that the prograde stage formed under temperature and fO₂ conditions of 430?C550°C and 10^?26?C10^?23, respectively.     

Earthquake prediction activities and Damavand earthquake precursor test site in Iran

Iran has long been known as one of the most seismically active areas of the world, and it frequently suffers destructive and catastrophic earthquakes that cause heavy loss of human life and widespread damage. The Alborz region in the northern part of Iran is an active EW trending mountain belt of 100 km wide and 600 km long. The Alborz range is bounded by the Talesh Mountains to the west and the Kopet Dagh Mountains to the east and consists of several sedimentary and volcanic layers of Cambrian to Eocene ages that were deformed during the late Cenozoic collision. Several active faults affect the central Alborz. The main active faults are the North Tehran and Mosha faults. The Mosha fault is one of the major active faults in the central Alborz as shown by its strong historical seismicity and its clear morphological signature. Situated in the vicinity of Tehran city, this 150-km-long N100° E trending fault represents an important potential seismic source. For earthquake monitoring and possible future prediction/precursory purposes, a test site has been established in the Alborz mountain region. The proximity to the capital of Iran with its high population density, low frequency but high magnitude earthquake occurrence, and active faults with their historical earthquake events have been considered as the main criteria for this selection. In addition, within the test site, there are hot springs and deep water wells that can be used for physico-chemical and radon gas analysis for earthquake precursory studies. The present activities include magnetic measurements; application of methodology for identification of seismogenic nodes for earthquakes of M ≥ 6.0 in the Alborz region developed by International Institute of Earthquake Prediction Theory and Mathematical Geophysics, IIEPT RAS, Russian Academy of Science, Moscow (IIEPT&MG RAS); a feasibility study using a dense seismic network for identification of future locations of seismic monitoring stations and application of short-term prediction of medium- and large-size earthquakes is based on Markov and extended self-similarity analysis of seismic data. The establishment of the test site is ongoing, and the methodology has been selected based on the IASPEI evaluation report on the most important precursors with installation of (i) a local dense seismic network consisting of 25 short-period seismometers, (ii) a GPS network consisting of eight instruments with 70 stations, (iii) magnetic network with four instruments, and (iv) radon gas and a physico-chemical study on the springs and deep water wells.     

Physical and chemical steady-state compaction in deep-sea sediments: Role of mineral reactions

Marine sediments typically exhibit steep porosity gradients in their uppermost centimeters. Although the decrease in porosity with depth below the sediment-water interface is primarily due to compression arising from the accumulation of overlying sediment, early diagenetic mineral dissolution and precipitation reactions may potentially also affect the porosity gradient. Here, we present a steady state compaction model, based on the mass and momentum conservation of total fluid and solid phases, in order to quantify the relative contributions of mineral reactions and physical compaction on porosity changes. The compaction model is applied to estimate hydraulic conductivity and compressive response coefficients of deep-sea sediments from measured porosity depth profiles. The results suggest an inverse relation between the compressive response coefficient and the lithogenic content of marine sediments. For deep-sea sediments exhibiting high rates of dissolution of siliceous shell fragments, the compaction model ignoring mineral reactions overestimates the hydraulic conductivity and compressive response coefficients. In contrast to non-compacting porous media, mineral dissolution in surficial sediments can lead to lower porosity. However, as illustrated for a deep-sea sediment in the equatorial Atlantic characterized by extensive dissolution of calcareous shell fragments, the effect of mineral dissolution and precipitation reactions on porosity gradients is, in most cases, negligible.     

Recent trends of mean maximum and minimum air temperatures in the western half of Iran

In this study, the trends of the annual, seasonal and monthly maximum (T _max) and minimum (T _min) air temperatures time series were investigated for 20 stations in the western half of Iran during 1966?C2005. Three statistical tests including Mann?CKendall, Sen??s slope estimator and linear regression were used for the analysis. The annual T _max and T _min series showed a positive trend in 85% of the stations and a negative trend in 15% of the stations in the study region. The highest increase of T _max and T _min values were obtained over Kermanshah and Ahwaz at the rates of (+)0.597°C/decade and (+)0.911°C/decade, respectively. On the seasonal scale, the strongest increasing trends were identified in T _max and T _min data in summer. The highest numbers of stations with positive significant trends occurred in the monthly T _max and T _min series in August. In contrast, the lowest numbers of stations with significant positive trends were observed between November and March. Overall, the results showed similar increasing trends for the study variables, although T _min generally increased at a higher rate than T _max in the study period.     

Vertical resolution enhancement of petrophysical Nuclear Magnetic Resonance (NMR) log using ordinary kriging

Nuclear Magnetic Resonance (NMR) logging provides priceless information about hydrocarbon bearing intervals such as free fluid porosity and permeability. This study focuses on using geostatistics from NMR logging instruments at high depths of investigation to enhance vertical resolution for better understanding of reservoirs. In this study, a NMR log was used such that half of its midpoint data was used for geostatistical model construction using an ordinary kriging technique and the rest of the data points were used for assessing the performance of the constructed model. This strategy enhances the resolution of NMR logging by twofold. Results indicated that the correlation coefficient between measured and predicted permeability and free fluid porosity is equal to 0.976 and 0.970, respectively. This means that geostatistical modeling is capable of enhancing the vertical resolution of NMR logging. This study was successfully applied to carbonate reservoir rocks of the South Pars Gas Field.