Coastal vulnerability to wave storms of Sele littoral plain (southern Italy)

This paper presents a new method for coastal vulnerability assessment (CVA), which relies upon three indicators: run-up distance (as a measurement of coastal inundation), beach retreat (as a measurement of potential erosion), and beach erosion rate (obtained through the shoreline positions in different periods). The coastal vulnerability analysis of Sele Coastal Plain to storm impacts is examined along a number of beach profiles realized between 2008 and 2009. This particular study area has been selected due to its low-lying topography and high erosion propensity. Results are given in terms of an impact index, performed by combining the response due to coastal inundation, storm erosion, and beach erosion rate. This analysis is implemented on the basis of morphosedimentary characteristics of the beach, wave climate evaluation, and examination of multitemporal aerial photographs and topographic maps. The analysis of the final results evidences different coastal responses as a function of the beach width and slope, which in turn depend on the local anthropization level. The comparison of this method with a Coastal Vulnerability Index method evidences the better attitude of CVA index to take into account the different beach features to explain the experienced damages in specific stretches of the coastline considered.     

Instruments, Detectors and the Future of Astronomy with Large Ground Based Telescopes

Results of a survey of instrumentation and detector systems, either currently deployed or planned for use at telescopes larger than 3.5 m, in ground based observatories world-wide, are presented. This survey revealed a number of instrumentation design trends at optical, near, and mid-infrared wavelengths. Some of the most prominent trends include the development of vastly larger optical detector systems (> 10⁹ pixels) than anything built to date, and the frequent use of mosaics of near-infrared detectors – something that was quite rare only a decade ago in astronomy. Some future science applications for detectors are then explored, in an attempt to build a bridge between current detectors and what will be needed to support the research ambitions of astronomers in the future.     

Provenance of deep-water reservoir sandstones from the Jubarte oil field,Campos Basin,Eastern Brazilian Margin

The provenance of the Maastrichtian deep-water reservoir sandstones from the Jubarte oil field (Campos Basin, eastern Brazil), was studied using an integrated approach that included quantitative petrography, conventional heavy mineral analysis, garnet mineral chemistry and zircon geochronology. The reservoirs are predominantly coarse, poorly-sorted sandstones with feldspathic composition derived from uplifted basement terrains. The fourth- and fifth-order depositional sequences analyzed show no major variations in composition or in provenance through time. However, variations in apatite:tourmaline presents potential to be used as a parameter for sandstone correlation within the field. The composition of heavy minerals indicates derivation from high temperature and low-to-medium pressure aluminous metapelitic rocks, from granites and subordinate mafic rocks, derived from the Cabo Frio Tectonic Domain and the Oriental terrain of Ribeira orogen, characterizing a supply route from SW to NE. The low ZTR index, as well as the absence of low-grade stable heavy minerals and of metasedimentary rock fragments, suggest that by the end of Cretaceous all supracrustal, low-grade terrains had already been totally eroded, and that plutonic, infracrustal rocks were exposed, similarly to the present situation.     

Fractal analysis of mingled/mixed magmas: an example from the Upper Pollara eruption (Salina Island, southern Tyrrhenian Sea, Italy)

Upper Pollara eruption products (13 ka, Salina Island, Italy) include both homogeneous and heterogeneous pumices resulting from mixing/mingling processes between an HK andesite and a high-SiO₂ rhyolite. Representative samples of heterogeneous pumices are collected and analyzed in order to check the correspondence between glass composition and morphological features of the mingling/mixing structures. Image analysis techniques are applied and eight grey color ranges (classes) are extracted from high-resolution scans of pumice. Class 1 (lighter colors) and class 8 (darker colors) show end-member glass compositions, i.e. HK andesite and high-SiO₂ rhyolite, respectively. These two classes show spot- to cluster-like morphological structures. Intermediate classes show an HK dacitic to rhyolitic composition and a banding- to fold-like morphology. Fractal analysis by box-counting of the boundary pattern of eight grey classified images is performed over a length scale of 0.028–1.8 cm. Fractal dimension D is between 1.01 and 1.84. Coupled fractal analysis and geochemical data reveal that D increases as the degree of magma interaction (homogenization) increases. This feature well fits the results from numerical models on the convective mixing of fluids driven by thermal convection. We conclude that the increase of D observed in the Upper Pollara samples reflects the transition from fractal mixing to homogenization. End-member magmas (HK andesite and high-SiO₂ rhyolite) represent isolated mixing regions, while homogenized magmas represent active mixing regions. In the analyzed pumices, isolated and active mixing regions coexist at scales between 10⁻⁴ and 10⁻² m. Morphological and compositional features of the Upper Pollara pumices result from turbulence.     

Distribution of dissolved labile and particulate iron and copper in Terra Nova Bay polynya (Ross Sea,Antarctica) surface waters in relation to nutrients and phytoplankton growth

The distribution of the dissolved labile and of the particulate Fe and Cu together with dissolved oxygen, nutrients, chlorophyll a and total particulate matter was investigated in the surface waters of Terra Nova Bay polynya in mid-January 2003. The measurements were conducted within the framework of the Italian Climatic Long-term Interactions of the Mass balance in Antarctica (CLIMA) Project activities. The labile dissolved fraction was operationally defined by employing the chelating resin Chelex-100, which retains free and loosely bound trace metal species. The dissolved labile Fe ranges from below the detection limit (0.15 nM) to 3.71 nM, while the dissolved labile Cu from below the detection limit (0.10 nM) to 0.90 nM. The lowest concentrations for both metals were observed at 20 m depth (the shallowest depth for which metals were measured). The concentration of the particulate Fe was about 5 times higher than the dissolved Fe concentration, ranging from 0.56 to 24.83 nM with an average of 6.45 nM. The concentration of the particulate Cu ranged from 0.01 to 0.71 nM with an average of 0.17 nM. The values are in agreement with the previous data collected in the same area. We evaluated the role of the Fe and Cu as biolimiting metals. The N:dissolved labile Fe ratios (18,900–130,666) would or would not allow a complete nitrate removal, on the basis of the N:Fe requirement ratios that we calculated considering the N:P and the C:P ratios estimated for diatoms. This finding partially agrees with the Si:N ratio that we found (2.29). Moreover we considered a possible influence of the dissolved labile Cu on the Fe uptake process.     

Shallow and deep reservoirs involved in magma supply of the 1944 eruption of Vesuvius

 During the 1944 eruption of Vesuvius a sudden change occurred in the dynamics of the eruptive events, linked to variations in magma composition. K-phonotephritic magmas were erupted during the effusive phase and the first lava fountain, whereas the emission of strongly porphyritic K-tephrites took place during the more intense fountain. Melt inclusion compositions (major and volatile elements) highlight that the magmas feeding the eruption underwent differentiation at different pressures. The K-tephritic volatile-rich melts (up to 3 wt.% H₂O, 3000 ppm CO₂, and 0.55 wt.% Cl) evolved to reach K-phonotephritic compositions by crystallization of diopside and forsteritic olivine at total fluid pressure higher than 300 MPa. These magmas fed a very shallow reservoir. The low-pressure differentiation of the volatile-poor K-phonotephritic magmas (H₂O<1 wt.%) involved mixing, open-system degassing, and crystallization of leucite, salite, and plagioclase. The eruption was triggered by intrusion of a volatile-rich magma batch that rose from a depth of 11–22 km into the shallow magma chamber. The first phase of the eruption represents the partial emptying of the shallow reservoir, the top of which is within the volcanic edifice. The newly arrived magma mixed with that resident in the shallow reservoir and forced the transition from the effusive to the lava fountain phase of the eruption. Received: 14 September 1998 / Accepted: 10 January 1999     

The XMM-Newton Bright Serendipitous Survey: First Extragalactic Results

We present here some initial results from the ongoing XMM-Newton bright serendipitous survey. The survey is aimed at selecting and spectroscopically identifying a large and statistically representative sample of bright (f _x ≳ 7× 10⁻¹⁴ c.g.s) serendipitous X-ray sources in the 0.5–4.5 keV energy band (BSS) and a complementary (smaller) sample in the 4.5–7.5 keV energy band (HBSS). The work is partly based on observations obtained with XMM-Newton, an ESA science mission with instruments and contributors directly founded by ESA member states and the USA(NASA) and on observations collected at TNG. The TNG telescope is operated on the island of La Palma by the Centro Galileo Galilei of the INAF in the Spanish Observatorio del Roque de Los Muchachos of the Instituto de Astrofísica de Canarias. On behalf of the XMM-Newton Survey Science Center.     

New geomorphic evidence for anticlinal growth driven by blind-thrust faulting along the northern Marche coastal belt (central Italy)

The Northern Marche coastal belt is characterised by a series of NW-SE trending, NE verging folds forming the easternmost edge of the Apennines thrust front. Several geomorphic features suggest that the folds are still growing and hence that the thrust front is active. The occurrence of several historical and instrumental earthquakes (e.g. 1672, 1690, 1786, 1875, 1916, 1930, 1972, all having M_e 5.2) suggests that the thrust faults are also seismogenic.We performed a geomorphological analysis to identify and characterise the faults driving the active folds. Our approach assumes that anomalous drainage patterns and deformed Middle-Late Pleistocene alluvial and coastal terraces are indicators of the vertical component of tectonic strain. We identified, mapped and correlated with sea-level fluctuations a sequence of alluvial and coastal terraces. Longitudinal profiles of six rivers (Conca, Foglia, Metauro, Cesano, Misa, and Esino) show that terraces (1) consistently converge downstream, suggesting that they result from regional uplift that dies out near the coast, and (2) some are slightly warped where they cross anticline axes. We interpreted as coastal terraces several land-surface remnants arranged parallel to the present coastline. Lower remnants clearly top off gently landward-tilted coastal deposits. Reconstructed coastal terraces also seem to be tectonically warped.Our results help characterise the geometry and segmentation of a system that generated the largest earthquakes of the region and suggest the loci of potential seismic gaps. We conclude that the earthquake potential of the densely populated northern Marche coastal belt may be substantially higher than currently estimated.     

Estimating black hole masses in quasars using broad optical and UV emission lines

We review past work using broad emission lines as virial estimators of black hole masses in quasars. Basically one requires estimates of the emitting region radius and virial velocity dispersion to obtain black hole masses. The three major ways to estimate the broad-line emitting region (BLR) radius involve: (1) direct reverberation mapping, (2) derivation of BLR radius for larger samples using the radius-luminosity correlation derived from reverberation measures, and (3) estimates of BLR radius using the definition of the ionization parameter solved for BLR radius (photoionization method). At low redshift (z ? 0.7) FWHM Hβ serves as the most widely used estimator of virial velocity dispersion. FWHM Hβ can provide estimates for tens of thousands of quasars out to z ≈ 3.8 (IR spectroscopy beyond z ≈ 1). A new photoionization method also shows promise for providing many reasonable estimates of BLR radius via high S/N IR spectroscopy of the UV region 1300–2000 Å. FWHM Mgiiλ2800 can serve as a surrogate for FWHM Hβ in the range 0.4 ? z ? 6.5 while civλ1549 is affected by broadening due to non-virial motions and best avoided (i.e. there is no clear conversion factor between FWHM Hβ and FWHM Civλ1549). Most quasars yield mass estimates in the range 7 ? log M_BH ? 9.7. There is no strong evidence for values above 10.0 and there may be evidence for a turnover in the maximum black hole mass near z ≈ 5.     

Controls on the lateral channel-migration rate of braided channel systems in coarse non-cohesive sediment

Lateral movements of alluvial river channels control the extent and reworking rates of alluvial fans, floodplains, deltas, and alluvial sections of bedrock rivers. These lateral movements can occur by gradual channel migration or by sudden changes in channel position (avulsions). Whereas models exist for rates of river avulsion, we lack a detailed understanding of the rates of lateral channel migration on the scale of a channel belt. In a two-step process, we develop here an expression for the lateral migration rate of braided channel systems in coarse, non-cohesive sediment. On the basis of photographic and topographic data from laboratory experiments of braided channels performed under constant external boundary conditions, we first explore the impact of autogenic variations of the channel-system geometry (i.e. channel-bank heights, water depths, channel-system width, and channel slope) on channel-migration rates. In agreement with theoretical expectations, we find that, under such constant boundary conditions, the laterally reworked volume of sediment is constant and lateral channel-migration rates scale inversely with the channel-bank height. Furthermore, when channel-bank heights are accounted for, lateral migration rates are independent of the remaining channel geometry parameters. These constraints allow us, in a second step, to derive two alternative expressions for lateral channel-migration rates under different boundary conditions using dimensional analysis. Fits of a compilation of laboratory experiments to these expressions suggest that, for a given channel bank-height, migration rates are strongly sensitive to water discharges and more weakly sensitive to sediment discharges. In addition, external perturbations, such as changes in sediment and water discharges or base level fall, can indirectly affect lateral channel-migration rates by modulating channel-bank heights. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd. © 2019 The Author. Earth Surface Processes and Landforms published by John Wiley & Sons, Ltd.