Enhancing the mechanical properties of marine clay using cement solidification

Abstract

The use of soft clay and dredged marine clays as the construction material is challenging. This is because the high water content, high compressibility and low permeability of the clay causing the instability of ground and structure. This detrimental effect of soft clay can be improved by the cement solidification process, which is relatively cheap and efficient. This paper mainly focuses on the study of improvement on the mechanical behavior of cement mixed marine clay. The soil is reconstituted by using ordinary Portland cement of 5%, 10%, 15% and 20% by its mass. The study reveals that cementation of clay significantly improves the peak and residual strength of soil. Similarly, the primary yield stress of the soil is also improved from 16 to 275?kPa as cement content increases from 5% to 20%, respectively. By using statistical tools, the relationships between various parameters are established, which are very important to define the mechanical behavior of the clay. This study reveals that the yield surface of the solidified marine clay is not a smooth elliptical surface. Rather it is composed of two linear surfaces followed by a log-linear surface which can be modeled by using simple parameters obtained from triaxial tests.     

Geotechnical Aspects of Clayey Sediments Off Badagara on the Kerala Coast,India

Offshore geotechnical surveys form part of an integrated investigation to rejuvenate a decrepit minor port at Badagara, Kerala on the southwestern coast of India. The sediments typify a fluvio-marine milieu ranging from silty clay, sand, silty sand, sandy silt and clayey silt. Geotechnical and sedimentological studies of shallow cores reveal the geotechnical aspects besides the depositional history of the sediments. Downcore geotechnical variations and regressive coefficients based on their inter-relationships highlight diverse factorial inferences. X-Ray Diffraction data indicate the prominent clay type.

A comparative evaluation of the geotechnical characteristics of clayey sediments off Badagara, with similar studies along various sectors of the Kerala coast, both on land as well as in the near shore, is broadly attempted. Geotechnical studies carried out earlier on the uplifted Cochin marine clays provide comparative data for evaluating the possible variations between present day marine clayey sediments occurring along the Kerala coast and uplifted marine clays which, besides their gross variations in levels with respect to the present sea-level, also obviously relate to a much older depositional environment and provenance during probable Holocene times.     

Hydrochemistry and sediment characteristics of polar periglacial lacustrine environments on Fisher Island and Broknes Peninsula,East Antarctica

Fisher Island and Broknes Peninsula in the Larsemann Hills constitute part of a polar lowland periglacial environment between marine and glacial ecosystems. The landscape is characterized by gently rolling hills and broad valleys interspersed with lakes formed in glacially scoured basins. We analyzed the physieochemical parameters and the ionic constituents of water samples from 10 lakes in each of these two locations. Our results showed considerable differences between the two regions and demon- strated the influence of lithology and processes including weathering, evaporation, and atmospheric precipitation. All major cations and anions in the lake waters showed positive correlations indicating balanced ionic concentrations. Unconsolidated sediments were sparsely distributed and scattered over glacial deposits, valley fills, and occasional moraine ridges. The type and rate of sedi- mentation was mainly controlled by surface run-off and aeolian influx. The sediment samples from lake beds and the catchment area on Fisher Island were immature and poorly to very poorly sorted, consisting of gravelly sand with negligible silt and finer fractions. Sediments had a polymodal grain size distribution with the two major populations lying between -2 and 1 phi and be- tween 0 and 1.5 phi. The sediments were lithic arenite to arkosic in composition and the microtextures imprinted over quartz grains were dominated by mechanical textures resulting from several stages of glacial crushing and grinding. The presence of deep disso- lution cavities, cryptocrystalline precipitation, and euhedral crystal growth signified the effect of chemical activity after the deposition of grains in the lacustrine environment.     

Implications of climate change on streamflow of a snow-fed river system of the Northwest Himalaya

Air temperature and snow cover variability are sensitive indicators of climate change. This study was undertaken to forecast and quantify the potential streamflow response to climate change in the Jhelum River basin. The implications of air temperature trends (+0.11°C/decade) reported for the entire north-west Himalaya for past century and the regional warming (+0.7°C/decade) trends of three observatories analyzed between last two decades were used for future projection of snow cover depletion and stream flow. The streamflow was simulated and validated for the year 2007-2008 using snowmelt runoff model (SRM) based on in-situ temperature and precipitation with remotely sensed snow cover area. The simulation was repeated using higher values of temperature and modified snow cover depletion curves according to the assumed future climate. Early snow cover depletion was observed in the basin in response to warmer climate. The results show that with the increase in air temperature, streamflow pattern of Jhelum will be severely affected. Significant redistribution of streamflow was observed in both the scenarios. Higher discharge was observed during spring-summer months due to early snowmelt contribution with water deficit during monsoon months. Discharge increased by 5% 40% during the months of March to May in 2030 and 2050. The magnitude of impact of air temperature is higher in the scenario-2 based on regional warming. The inferences pertaining to change in future streamflow pattern can facilitate long term decisions and planning concerning hydro-power potential, waterresource management and flood hazard mapping in the region.     

Multi isotopic approach to study temporal variation of groundwater quality in coastal aquifer of Saijo plain, Shikoku Island, Japan

In order to delineate geochemical processes and its relation with groundwater quality evolution, hydrochemical and isotopic analysis were carried out in coastal groundwater of Saijo plain, western Japan. From analytical results, even within a small distance from the coast; ionic concentration of water samples varies a lot which infers non-homogenous and patchy distribution of different aquifer system (complex geology). From stable isotopic results, it was found that most of sample points plotted near the local meteoric water line (LMWL) i.e. origin of ground water is meteoric in principle; however point away from the LMWL might favors exchange with rock minerals.     

Effect of spatial resolution on regionalization of hydrological model parameters

Lack of availability of historical data series is one of the major hindrances in hydrological modelling. Regionalization of hydrological model parameters is one of the solutions to obtain the parameters for ungauged basins. Recently, lots of methodologies have been developed. They can be categorized as model calibration then fitting regression between model parameters and catchments characteristics, using some kind of transfer function. The aim of this study was to compare different regionalization methods as well as to look how the spatial resolution affects regionalization. In this study, a modified Lipschitz and monotony condition was used for regionalization. To identify the effect of the model resolution, the parameters of a distributed and semi‐distributed version of the Hydrologiska Byråns Vattenbalansavdelning (HBV) model were regionalized. The study was conducted at the upper Neckar catchment of southwest Germany. It has been found that the combination of Lipschitz and monotony condition has performed reasonably. It has been seen that the distributed model structure has outperformed the semi‐distributed model structure. It shows under present data conditions that higher model resolution can describe processes of ungauged basins reasonably. Copyright © 2011 John Wiley & Sons, Ltd.     

Stochastic finite fault modelling of M w 4.8 earthquake in Kachchh, Gujarat, India

The modified stochastic finite fault modelling technique based on dynamic corner frequency has been used to simulate the strong ground motions of M _w 4.8 earthquake in the Kachchh region of Gujarat, India. The accelerograms have been simulated for 14 strong motion accelerographs sites (11 sites in Kachchh and three sites in Saurashtra) where the earthquake has been recorded. The region-specific source, attenuation and generic site parameters, which are derived from recordings of small to moderate earthquakes, have been used for the simulations. The main characteristics of the simulated accelerograms, comprised of peak ground acceleration (pga), duration, Fourier and response spectra, predominant period, are in general in good agreement with those of observed ones at most of the sites. The rate of decay of simulated pga values with distance is found to be similar with that of observed values. The successful modelling of the empirical accelerograms indicates that the method can be used to prepare wide range of scenarios based on simulation which provide the information useful for evaluating and mitigating the seismic hazard in the region.     

Kinetics,Mechanistic and Thermodynamics of Zn(II) Ion Sorption: A Modeling Approach

Biosorption potential of Cedrus deodara sawdust (CDS) in terms of sorption of Zn(II) ion across liquid phase has been evaluated in the present investigation. The surface of the CDS biomass before the sorption of Zn(II) ions seemed to be more porous, non‐crystalline and heterogeneous. The maximum uptake capacity of CDS was 97.39 mg g^?1. Sorption of Zn(II) ion on the surface of CDS sawdust was maximum at pH 5, temperature 45°C, initial concentration of Zn(II) ion 100 mg L^?1, biomass dose 1 g L^?1, contact time 150 min, and agitation rate 160 rpm. Pseudo second‐order kinetics with the highest linear regression coefficient (R² = 0.99), and lowest values of error functions, i.e., chi (χ²) and sum of square errors (SSE) against pseudo first‐order rate kinetics showed that the sorption of Zn(II) ion on the surface of CDS was mediated by chemosoprtive forces of attraction rather than physical adsorption. Mechanistically, relatively higher proportion of sorption of Zn(II) ion in early phase of contact time was profoundly explained by Bangham's equation and film diffusivity (D^f). Intraparticle or pore diffusion (D_p) of Zn(II) ion inside the pores of CDS was rate limiting step at the later stage of contact time. Furthermore, the thermodynamic study on sorption of metal ion delineated the fact that the Zn(II) sorption on the surface of CDS was spontaneous, endothermic together with increased entropy at solid liquid interface.     

Photocatalytic Decolorization Kinetics and Mineralization of Reactive Black 5 Aqueous Solution by UV/TiO2 Nanoparticles

The photocatalytic decolorization and mineralization of Reactive Black 5 (RB5) dye in presence of TiO₂ Degussa P25 has been studied using artificial light radiation in a shallow pond slurry reactor. The equilibrium adsorption of dye, influence of pH (3–11), catalyst load (0.5–3.0 g/L), and dye concentration (20–100 mg/L) on decolorization kinetics were studied. The effect of area to volume ratio of photoreactor on decolorization kinetics has been also studied. Mineralization studies were performed at optimized conditions of pH (3) and catalyst load (1.5 g/L). The maximum adsorption (26.5 mg/g) of dye was found to occur at pH 3. The apparent pseudo first order decolorization rate constant (k_app) value followed the order pH 3 > pH 11 > pH 9 > pH 7. As compared to available literature reduction in total organic carbon (TOC) was minimal by the time there was complete decolorization. Initial reduction in TOC was followed by subsequent increasing trend till complete decolorization. Final decreasing trend in TOC was observed only after complete decolorization. Twelve hours of treatment under experimental conditions reduced TOC content by 70% only. Discussion of results suggest that photocatalytic treatment of colored effluent under low UV intensity, and low A/V ratio may result in completely decolorized effluent but still having high COD.