Impact of Indian ocean dipole on the coastal upwelling features off the southwest coast of India

A three-dimensional regional ocean model is used to examine the impact of positive Indian ocean dipole (pIOD) events on the coastal upwelling features at the southwest coast of India (SWCI). Two model experiments are carried out with different surface boundary conditions that prevailed in the normal and pIOD years from 1982 to 2010. Model experiments demonstrate the weakening of coastal upwelling at the SWCI in the pIOD years. The reduced southward meridional wind stress off the SWCI leads to comparatively lower offshore Ekman transport during August–October in the pIOD years to that in normal years. The suppressed coastal upwelling results in warmer sea surface temperature and deeper thermocline in the pIOD years during June–September. The offshore spatial extent of upwelled colder (<?22 °C) water was up to 75.5° E in August–September in normal years that was limited up to 76.2° E in pIOD years. The heat budget analysis reveals the decreased contribution of vertical entrainment process to the mixed layer cooling in pIOD years which is almost half of that of normal years in October. The net heat flux term shows warming tendency during May–November with a higher magnitude (+?0.4 °C day^?1) in normal years than pIOD years (+?0.28 °C day^?1). The biological productivity is found to reduce during the pIOD years as the concentration of phytoplankton and zooplankton decreases over the region of coastal upwelling at SWCI. Nitrate concentration in the pIOD years dropped by half during August–September and dropped by an order of magnitude in October as compared to its ambient concentration of 13 μmol L^?1 in normal years.     

Understanding hydrological processes of glacierized catchments in the western Himalayas by a multi-year tracer-based hydrograph separation analysis

Snow and glacier melt are significant contributors to streamflow in Himalayan catchments, and their increasing contributions serve as key indicators of climate change. Consequently, the quantification of these streamflow components holds significant importance for effective water resource management. In this study, we utilized the spatio-temporal variability of isotopic signatures in stream water, rainfall, winter fresh snow, snowpack, glaciers, springs, and wells, in conjunction with hydrometeorological observations and Snow Cover Area (SCA) data, to identify water sources and develop a conceptual understanding of streamflow dynamics in three catchments (Lidder, Sindh, and Vishow) within the western Himalayas. The following results were obtained: (a) endmember contributions to the streamflow exhibit significant spatial and seasonal variability across the three catchments during 2018–2020; (b) snowmelt dominates streamflow, with average contributions across the entire catchment varying: 59% ± 9%, 55% ± 4%, 56% ± 6%, and 55% ± 9% in Lidder, 43% ± 6%, 38% ± 6%, 32% ± 4%, and 33% ± 5% in Sindh and 45% ± 8%, 40% ± 6%, 39% ± 6%, and 32% ± 5% in Vishow during spring, summer, autumn, and winter seasons, respectively; (c) glacier melt contributions can reach ~30% to streamflow near the source regions during peak summer; (d) The primary uncertainties in streamflow components are attributed to the spatiotemporal variability of tracer signatures of winter fresh snow/snowpack (±1.9% to ±20%); (e)regarding future streamflow components, if the glacier contribution were to disappear completely, the annual average streamflow in Lidder and Sindh could decrease up to ~20%. The depletion of the cryosphere in the region has led to a rapid increase in runoff (1980–1900), but it has also resulted in a significant streamflow reduction due to glacier mass loss and changes in peak streamflow over the past three decades (1990–2020). The findings highlight the significance of environmental isotope analysis, which provides insights into water resources and offers a critical indication of the streamflow response to glacier loss under a changing climate.     

Entropy-based fuzzy classification parameter optimization using uncertainty variation across spatial resolution

In the past researchers have suggested hard classification approaches for pure pixel remote sensing data and to handle mixed pixels soft classification approaches have been studied for land cover mapping. In this research work, while selecting fuzzy c-means (FCM) as a base soft classifier entropy parameter has been added. For this research work Resourcesat-1 (IRS-P6) datasets from AWIFS, LISSIII and LISS-IV sensors of same date have been used. AWIFS and LISS-III datasets have been used for classification and LISS-III and LISS-IV data were used for reference data generation, respectively. Soft classified outputs from entropy based FCM classifiers for AWIFS and LISS-III datasets have been evaluated using sub-pixel confusion uncertainty matrix (SCM). It has been observed that output from FCM classifier has higher classification accuracy with higher uncertainty but entropy-based classifier with optimum value of regularizing parameter generates classified output with minimum uncertainty.     

Improvement of user’s accuracy through classification of principal component images and stacked temporal images

The classification accuracy of the various categories on the classified remotely sensed images are usually evaluated by two different measures of accuracy, namely, producer’s accuracy (PA) and user’s accuracy (UA). The PA of a category indicates to what extent the reference pixels of the category are correctly classified, whereas the UA of a category represents to what extent the other categories are less misclassified into the category in question. Therefore, the UA of the various categories determines the reliability of their interpretation on the classified image and is more important to the analyst than the PA. The present investigation has been performed in order to determine if there occurs improvement in the UA of the various categories on the classified image of the principal components of the original bands and on the classified image of the stacked image of two different years. We performed the analyses using the IRS LISS III images of two different years, i.e., 1996 and 2009, that represent the different magnitude of urbanization and the stacked image of these two years pertaining to Ranchi area, Jharkhand, India, with a view to assessing the impacts of urbanization on the UA of the different categories. The results of the investigation demonstrated that there occurs significant improvement in the UA of the impervious categories in the classified image of the stacked image, which is attributable to the aggregation of the spectral information from twice the number of bands from two different years. On the other hand, the classified image of the principal components did not show any improvement in the UA as compared to the original images.     

Morphometry and Morphostructural Studies of the Parts of Gola River and Kalsa River Basins,Chanphi-Okhalkanda Region,Kumaun Lesser Himalaya,India

Geotectonics - Study of morphometric parameters such as stream length (Lu) and stream length ratios (Rl), bifurcation ratio (Rb), drainage density (D), form factor (Rf), circularity ratio (Rc),...     

Late Cambrian microbial build-ups,Llano Area,Central Texas: A three-phase morphological evolution

Although Late Cambrian microbial build-ups were recognized in the Point Peak Member of the Wilberns Formation in Central Texas (USA) nearly 70 years ago, only a few studies focused specifically on the build-ups themselves. This study focuses on the interpretation of the regional (15 measured sections described in literature representing an area of 8000 km²) and local (field and drone photogrammetry studies in a 25 km² area from within south Mason County) microbial build-up occurrence, describes their growth phases and details their interactions with the surrounding inter-build-up sediments. The study establishes the occurrence of microbial build-ups in the lower and upper Point Peak members (the Point Peak Member is informally broken up into the lower Point Peak and the upper Point Peak members separated by Plectotrophia zone). The lower Point Peak Member consists of three <1 m thick microbial bioherms and biostrome units, in addition to heterolithic and skeletal/ooid grainstone and packstone beds. One, up to 14 m thick, microbial unit associated with inter-build-up skeletal and ooid grainstone and packstone beds, intercalated with mixed siliciclastic–carbonate silt beds, characterizes the upper Point Peak member. The microbial unit in the upper Point Peak member displays a three-phase growth evolution, from an initial colonization phase on flat based, rip-up clast lenses, to a second aggradation and lateral expansion phase, into a third well-defined capping phase. The ultimate demise of the microbial build-ups is interpreted to have been triggered by an increase of water turbidity caused by a sudden influx of fine siliciclastics. The lower Point Peak member represents inner ramp shallow subtidal and intertidal facies and the upper Point Peak member corresponds to mid-outer ramp subtidal facies. Understanding the morphological architecture and depositional context of these features is of importance for identifying signatures of early life on Earth.     

UPPER BOUND SOLUTION FOR PULLOUT CAPACITY OF ANCHORS ON SANDY SLOPES

By making use of limit analysis, an upper bound solution in a closed form for determining the ultimate pullout capacity of plate anchors buried in sandy slopes has been established. The anchor plate orientation has been considered either horizontal or parallel to the slope, with the pullout force applied perpendicular to the plate. It has been found that the pullout capacity for horizontal anchors, even on slopes, remains the same as that on horizontal ground surface as long as the average embedment ratio is kept constant. Whereas for anchors which are aligned parallel to the slope the collapse load decreases continuously with the increase in the inclination of slope. © 1997 John Wiley & Sons, Ltd.     

Probabilistic seismic hazard assessment for some parts of the Indo-Gangetic plains,India

Natural Hazards - Indo-Gangetic plains are seismically most vulnerable due to the proximity of adjacent great Himalayan earthquakes and thick alluvium deposits of the Ganga River system. As the...     

Characterization of partial melting events in garnet-cordierite gneiss from the Kerala Khondalite Belt,India

Phase equilibria modelling coupled with U–Pb zircon and monazite ages of garnet–cordierite gneiss from Vallikodu Kottayam in the Kerala Khondalite Belt,southern India are presented here.The results suggest that the area attained peak P–T conditions of^900
C at 7.5–8 kbar,followed by decompression to 3.5–5 kbar and cooling to 450–480
C,preserving signatures of the partial melting event in the field of high to ultra-high temperature metamorphism.Melt reintegration models suggest that up to 35%granitic melt could have been produced during metamorphism at^950
C.The U–Pb age data from zircons(~1.0–~0.7 Ga)and chemical ages from monazites(~540 Ma and^941 Ma)reflect a complex tectonometamorphic evolution of the terrain.The^941 Ma age reported from these monazites indicate a Tonian ultra-high temperature event,linked to juvenile magmatism/deformation episodes reported from the Southern Granulite Terrane and associated fragments in Rodinia,which were subsequently overprinted by the Cambrian(~540 Ma)tectonothermal episode.