Effect of urbanization on runoff characteristics of the On-Cheon Stream watershed in Pusan,Korea

This study investigated the effect of urbanization on runoff from the On-Cheon Stream watershed in Pusan, Korea. This watershed has been experiencing considerable urbanization since the 1960s. There are two gauging stations in the watershed. For one of the stations there are recent flow data and for the other flow data were observed in the past. A linear reservoir model was chosen and runoff was analysed for several flood events. The linear reservoir model has been found to generate flood hydrographs accurately for both gauging stations, and its applicability to the study area has also been established. Using two methods of computing effective rainfall or rainfall excess (ϕ-index and constant percentage method), the results of runoff analyses were investigated. The ϕ-index method yielded better results than the constant percentage method. A comparison of hydrographs observed in the past with the simulation results at the Ie-Sup bridge site revealed that the peak discharge increased and the mean lag time of the study area decreased owing to urbanization over the past two decades. It is also possible to evaluate the effect of urbanization quantitatively. © 1998 John Wiley & Sons, Ltd.     

Simulation of the direct runoff hydrograph at basin outlet

A simple model describing the transformation of effective rainfall to direct runoff through the overland flow mechanism is presented. The model is based on the classical representation of a watershed by a combination of planes and channels. The dynamics of overland flow in each plane is simulated by the non-linear kinematic wave, but the outflow from a given plane is concentrated in the middle of the corresponding drainage channel. The water routing in the channels is carried out by a piece-wise linearized formulation in space of the kinematic wave approximation. Using synthetic events on 10 watersheds, the model was tested by comparing it with results obtained by applying the non-linear kinematic wave to all the elements of the watershed. The model was found to be adequate, even in a form that simplifies the geometric features of the planes through an averaging procedure based on the Horton–Strahler ordering scheme of the watershed. © 1998 John Wiley & Sons, Ltd.     

Distribution functions of spring discharges according to their lithologies and the influence of lower limit to flow: an example from Spain

Specific functions of distribution of the number of springs and of their contributions according to flow for each of nine lithological groups are established. These functions confirm the suitability of a general type of distribution (Sanz 1996), which is a borderline case of the lognormal distribution. The statistical methods proposed for the lithological types presented can be applied to any region if data on flow and lithology of the aquifers drained by springs are available. These methods have been applied to Spain, a representative region with varied geology, climate and topography; 71.2% of spring flow is supplied by limestones, 19.17% by alluvial sediments and marls, 6.7% by conglomerates and sandstones, and 3% by slates, plutonic rocks, quartzites, and other groups. Springs with discharge rates exceeding 2000 L/s exist only in limestones. The majority of springs with low flow occur in marls. If we consider springs with flow greater than 0.5 L/s, alluvial sediments, sandstones, marls, and limestones have the greatest density of springs per surface area, although the average flow varies greatly from one lithology to the next. The cumulative estimated discharge and the estimated number of springs depend upon the definition of the lower limit of flow. For example, total discharge is reduced by 30% if we eliminate all springs with flow lower than 0.5 L/min.     

Transport of three herbicides in ground water at Twin Lake test site,Chalk River,Ontario, Canada

A field tracer test performed under natural flow conditions at the Twin Lake test site, Chalk River Laboratories of the Atomic Energy of Canada Ltd. in Chalk River, Ontario, Canada, using tritium and three herbicides (Chlortoluron, Terbuthylazine, and Pendimethalin) was interpreted using the dispersion equation with a combined reaction model. The reaction model couples an instantaneous equilibrium reaction governed by a linear adsorption isotherm with a reversible or irreversible kinetic reaction of the first order, and decay. An improved interpretation method consists of a simultaneous fitting of theoretical concentration and mass-recovery curves to the experimental data, which leads to a more reliable determining of reaction models and improves the accuracy of fitting. Tritium served as the reference tracer to determine the flow velocity, dispersivity, and the recovery of the herbicides. Chlortoluron was slightly delayed by equilibrium exchange with strongly reduced concentration due to an irreversible kinetic reaction and/or decay. Terbuthilazine was slightly delayed by equilibrium exchange, with strongly reduced concentration due to a reversible kinetic reaction with some influence of decay. A strong equilibrium reaction and a strong reversible kinetic reaction without degradation governed the transport of Pendimethalin, reducing considerably its concentration. The results obtained show that simulations based only on Kd and decay constant, especially if these parameters are found in the laboratory, may considerably differ from those performed with reaction parameters determined in properly performed field tests. The dominant reaction types, and the values of parameters found in the study, supply useful information on the transport of the investigated herbicides in sandy aquifers under natural flow conditions.     

A data‐based mechanistic modelling (DBM) approach to understanding dynamic sediment transmission through Wyresdale Park Reservoir,Lancashire, UK

This paper outlines the application of a new data‐based mechanistic (DBM) modelling methodology to the characterization of the sediment transmission dynamics in a small upland reservoir, Wyresdale Park, Lancashire. The DBM modelling strategy exploits advanced statistical procedures to infer the dynamic model structure and its associated parameters directly from the instrumented data, producing a parametrically efficient, continuous time, transfer function model which relates suspended sediment load at the reservoir inflow to the outflow at the event scale. The associated differential equation model parameters have physical attributes which can be interpreted in terms of sediment transmission processes and associated reservoir trap efficiency. Sedigraph analysis suggests that wind‐induced resuspension episodically supplies an additional load to the reservoir outlet. The stochastic nature of the DBM model makes it ideal for evaluating the effects of uncertainty through Monte Carlo simulations (MCS) for discharge and sediment transmission. Copyright © 2000 John Wiley & Sons, Ltd.     

Kontamination mit coliformen Keimen durch Insektenlarven bei der Aufbereitung von Trinkwasser

Contamination of Drinking Water with Coliform Organisms by the Larves of Gnats in the Water Treatment Plant E. coli and coliform organisms are used to judge the microbial quality of drinking water. The presence of these organisms in water indicates that there is a risk for faecal oral transmitted pathogen organisms. E. coli shows the faecal contamination of men and warm blooded animals (mammalian and birds), coliform organisms may be excreted as well from cold blooded animals. The cold blooded animals normally don’t excrete pathogen organisms relevant for human beings. So coliform organisms don’t have such a high relevance for drinking water microbiology. In this paper an incident is presented with a contamination of drinking water with coliform organisms in the treatment plant by the larves of gnats. The larves of the gnats crawl into the treatment chamber via entrance for ventilation. The larves were kept back on the surface of the filters but they contaminated the water with coliform organisms.     

Magnetic properties of recent sediments in Lake Baikal, Siberia

Mineral magnetic measurements of six ²¹⁰Pb-dated surface cores from different basins of Lake Baikal, Siberia, show temporal records controlled by a range of internal and external processes. With the exception of sediments on the Academician Ridge, there is clear evidence for widespread reductive diagenesis effects on the ferrimagnetic component coupled with neo-formation of paramagnetic iron minerals. Greigite formation, bacterial magnetosome accumulation and turbidite layers may affect the properties of some sediment levels. Concentrations of canted antiferromagnetic minerals (eg. haematite) appear to increase from the 19th century onwards. These minerals are less affected by dissolution processes and probably represent detrital minerals delivered by catchment fluvial processes. The magnetic evidence for recent atmospheric pollution by fossil-fuel combustion processes is weak in all the cores, and supports the findings from studies of spherical carbonaceous particles (SCPs) and heavy metals that pollution is largely restricted to the southern basin. Correlations between recent sediments based on magnetic data may be insecure over long distances or between basins.     

Late Quaternary sedimentation on the Leidy Creek fan, Nevada–California: geomorphic responses to climate change

Well-dated surface and subsurface deposits in semiarid Fish Lake Valley, Nevada and California, demonstrate that alluvial-fan deposition is strongly associated with the warm dry climate of the last two interglacial intervals, and that fans were stable and (or) incised during the last glaciation. Fan deposition was probably triggered by a change from relatively moist to arid conditions causing a decrease in vegetation cover and increases in flash floods and sediment yield. We think that this scenario applies to most of the other valleys in the southern Basin and Range. Radiocarbon, tephra, and a few thermoluminescence and cosmogenic ages from outcrops throughout Fish Lake Valley and from cores on the Leidy Creek fan yield ages of >100–50 ka and 11–0 ka for the last two periods of alluvial-fan deposition. Mapping, coring and shallow seismic profiling indicate that these periods were synchronous throughout the valley and on the proximal and distal parts of the fans. From 50 to 11 ka, fan deposition ceased, a soil formed on the older alluvium and the axial drainage became active as runoff and stream competence increased. Slow deposition due to sheet flow or aeolian processes locally continued during this interval, producing cumulic soil profiles. The soil was buried by debris-flow sediment beginning at about 11 ka, coincident with the onset of relatively dry and warm conditions in the region. However, ground-water discharge maintained a large freshwater marsh on the valley floor throughout the Holocene. Pulses of deposition during the Holocene are recorded in the marsh and fan deposits; some pulses coincided with periods of or transitions to warm, dry climate indicated by proxy climate records, whereas others may reflect local disturbances associated with volcanism and fires. Within the marsh deposits, much of the clastic material is probably desert loess. In addition, the deposition of coppice dunes within the fan deposits coincides with two dry periods during the late Holocene.