Porphyroblast rotation during crenulation cleavage development: an example from the aureole of the Mooselookmeguntic pluton, Maine, USA

In the low‐pressure, high‐temperature metamorphic rocks of western Maine, USA, staurolite porphyroblasts grew at c. 400 Ma, very late during the regional orogenesis. These porphyroblasts, which preserve straight inclusion trails with small thin‐section‐scale variation in pitch, were subsequently involved in the strain and metamorphic aureole of the c. 370 Ma Mooselookmeguntic pluton. The aureole shows a progressive fabric intensity gradient from effectively zero emplacement‐related deformation at the outer edge of the aureole ～2900 m (map distance) from the pluton margin to the development of a pervasive emplacement‐related foliation adjacent to the pluton. The development of this pervasive foliation spanned all stages of crenulation cleavage development, which are preserved at different distances from the pluton. The spread of inclusion‐trail pitches in the staurolite porphyroblasts, as measured in two‐dimensional (2‐D) thin sections, increases nonlinearly from ～16° to 75° with increasing strain in the aureole. These data provide clear evidence for rotation of the staurolite porphyroblasts relative to one another and to the developing crenulation cleavage. The data spread is qualitatively modelled for both pure and simple shear, and both solutions match the data reasonably well. The spread of inclusion‐trail orientations (40–75°) in the moderately to highly strained rocks is similar to the spread reported in several previous studies. We consider it likely that the sample‐scale spread in these previous studies is also the result of porphyroblast rotation relative to one another. However, the average inclusion‐trail orientation for a single sample may, in at least some instances, reflect the original orientation of the overgrown foliation.     

Gold ore-forming fluids of the Tanami region, Northern Australia

Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H₂O + CO₂ ± CH₄ ± N₂-bearing fluids. The CO₂-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl₂-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO₂ ± N₂ ± CH₄, with the more deeply formed deposits being enriched in CH₄ and higher level deposits being enriched in CO₂. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N₂. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO₂-bearing inclusions. Calculated δ ¹⁸O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ ¹³C values from CO₂ extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H₂S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.     

Detrital zircon geochronology of Palaeozoic Novaya Zemlya – a key to understanding the basement of the Barents Shelf

The Novaya Zemlya fold‐and‐thrust‐belt is the northern continuation of the late Palaeozoic Uralide Orogen. Little is known about its deeper structure and the basement history of the adjacent Barents and Kara shelves. Based on geological evidence and detrital zircon analysis of 28 samples from the northeastern and stratigraphically deepest part of the archipelago, we demonstrate that Cambro‐Ordovician turbidite‐dominated deposition was almost exclusively sourced from rocks consolidated during the Timanian orogeny (Timanian basement). A profound change in provenance occurred near the end of the Ordovician. Over 90% of the zircons from Silurian and about 80% from Devonian strata have ages characteristic of the Sveconorwegian Orogen, implying uplift of these rocks in the vicinity of Novaya Zemlya. The presence of Sveconorwegian and Grenvillian rocks in the high Arctic suggests revision of recent reconstructions of the Rodinia supercontinent, its break‐up and subsequent Caledonian orogeny.     

Bioconcentration factors for petroleum hydrocarbons, PAHs, LABs and biogenic hydrocarbons in the blue mussel

Bioconcentration factors (K_bc) for petroleum hydrocarbons, PAHs, LABs and biogenic hydrocarbons in Mytilus edulis were measured in field experiments using time-integrating water samplers. Seven deployments at five sites gave lipid weight K_bcs for total hydrocarbons ranging from 0.99 × 10⁶ to 3.1 × 10⁶ (mean 1.6 × 10⁶)—a narrower range than has been obtained previously. Bioconcentration factors for the PAHs were similar to those for total hydrocarbons where the major hydrocarbon source was oil. However, at other sites the factors for PAHs were an order of magnitude lower than those for petroleum and for hydrocarbons originating from algae. Compositional profiles for the linear alkyl benzenes (LABs) suggested that these compounds were assimilated primarily from the dissolved phase, despite their greater abundance on particles.     

Was the M<Subscript>w</Subscript> 7.5 1952 Kern County,California, earthquake induced (or triggered)?

Several recent studies have presented evidence that significant induced earthquakes occurred in a number of oil-producing regions during the early and mid-twentieth century related to either production or wastewater injection. We consider whether the 21 July 1952 M_w 7.5 Kern County earthquake might have been induced by production in the Wheeler Ridge oil field. The mainshock, which was not preceded by any significant foreshocks, occurred 98 days after the initial production of oil in Eocene strata at depths reaching 3 km, within ~1 km of the White Wolf fault (WWF). Based on this spatial and temporal proximity, we explore a potential causal relationship between the earthquake and oil production. While production would have normally be expected to have reduced pore pressure, inhibiting failure on the WWF, we present an analytical model based on industry stratigraphic data and best estimates of parameters whereby an impermeable splay fault adjacent to the main WWF could plausibly have blocked direct pore pressure effects, allowing the poroelastic stress change associated with production to destabilize the WWF, promoting initial failure. This proof-of-concept model can also account for the 98-day delay between the onset of production and the earthquake. While the earthquake clearly released stored tectonic stress, any initial perturbation on or near a major fault system can trigger a larger rupture. Our proposed mechanism provides an explanation for why significant earthquakes are not commonly induced by production in proximity to major faults.     

Effect of spatial resolution on regionalization of hydrological model parameters

Lack of availability of historical data series is one of the major hindrances in hydrological modelling. Regionalization of hydrological model parameters is one of the solutions to obtain the parameters for ungauged basins. Recently, lots of methodologies have been developed. They can be categorized as model calibration then fitting regression between model parameters and catchments characteristics, using some kind of transfer function. The aim of this study was to compare different regionalization methods as well as to look how the spatial resolution affects regionalization. In this study, a modified Lipschitz and monotony condition was used for regionalization. To identify the effect of the model resolution, the parameters of a distributed and semi‐distributed version of the Hydrologiska Byråns Vattenbalansavdelning (HBV) model were regionalized. The study was conducted at the upper Neckar catchment of southwest Germany. It has been found that the combination of Lipschitz and monotony condition has performed reasonably. It has been seen that the distributed model structure has outperformed the semi‐distributed model structure. It shows under present data conditions that higher model resolution can describe processes of ungauged basins reasonably. Copyright © 2011 John Wiley & Sons, Ltd.     

Sm–Nd and Sr isotope systematics of scheelite from the giant Au(–W) deposit Muruntau (Uzbekistan): implications for the age and sources of Au mineralization

The application of the Sm-Nd isotope system of scheelite to dating of low-sulfide, quartz-vein hosted Au mineralization is still under discussion. In the present work, new Sm-Nd and Rb-Sr data for scheelite from the giant Muruntau/Myutenbai Au deposit (Kyzylkum, Western Uzbekistan) are discussed. Based on the geological relationship, mineralogical properties, and trace element characteristics, two types of scheelite can be distinguished within the deposit. The first one is represented by early bluish luminescent and weakly coloured scheelite (generation 1) found within strongly deformed flat quartz veins. The apparent isochron defined by this scheelite (351ᆪ Ma) is interpreted as a mixing line. Typically brownish to orange and yellowish luminescent scheelite from steeply dipping veins (generation 2) defines a Sm-Nd isochron age of 279ᆦ Ma ()_Nd=-9.5ǂ.3; MSWD: 1.5). No evidence for mixing or disturbance by late alteration were found for these scheelites. This Sm-Nd isochron age agrees with the Rb-Sr and K-Ar age range for wall rock alteration in this deposit reported previously. The age of 280 Ma is interpreted to date the high-grade ore formation in the Muruntau deposit. There are currently no reliable age data available on the magmatic events in the Muruntau region. Probably, there is some overlap in time of the Hercynian gold deposition with the intrusion of lamprophyric dykes. The Nd and Sr isotopic signatures of scheelite define the wall rocks (mainly metasiltstones and metasandstones) as the most probable sources for these elements in scheelite.     

大别山西部河南罗山熊店加里东期榴辉岩锆石特征及SHRIMP分析结果

熊店榴辉岩产于大别山西部苏家河构造混杂岩带内,是典型的高压一超高压中温榴辉岩。作者应用岩学结合阴极发光和扫描电镜方法,较系统地研究了榴辉岩中锆石在岩石中的赋存状态、内部结构及表面特征。锆石主要产于石榴子石等变质矿物内,与主晶界面清晰,具有多晶面等变质锆石特有形貌特征,内部均或发育变质生长结构,从而说明它们是变质作用的产物。ＳＨＲＩＭＰ分析表明,锆石＾２０６Ｐｂ／＾２３８Ｕ年龄为３３５～４２４Ｍａ,