Automatic Location of Swarm Earthquakes from Local Network Data

An advanced method of automated seismic phase picking and exact location and magnitude determination of swarm micro-earthquakes from local network data is presented. The phase picker is applied in two steps: first, S-wave groups are identified using a polarisation detector, and then corresponding P-wave groups are searched for. The times of maximum P- and S-amplitudes are then used as starting points for the determination of accurate P- and S-arrival times. The maximum S-wave amplitudes are utilised for determining local magnitudes. The whole procedure is checked by simultaneous preliminary hypocentre location providing estimates of local magnitudes and a compatibility check of the candidate P- and S-phases. The closest station to the earthquake cluster is used as a master, and the phase search at the remaining stations is governed by the P- and S-phases identified at the master station. Thanks to the use of apriori information on the approximate position of hypocentres, the procedure is also capable of picking the individual P- and S-phases of sequences of overlapping swarm events. The performance of the procedure was tested by comparison of the automatically and interactively created catalogues of the January 1997 NW-Bohemia micro-earthquake swarm. With stations located at epicentral distances between 0 and 20 km, the difference between hypocentre coordinates obtained by automatic and interactive processing did not exceed 80 m for 86% events. All events above magnitude 0.5 were identified, and the automatically determined polarity of first P-wave motion proved to be correct in 89% of them.     

Kinematic interaction factors of deep foundations with inclined piles

The beneficial or detrimental role of battered piles on the dynamic response of piled foundations has not been yet fully elucidated. In order to shed more light on this aspect, kinematic interaction factors of deep foundations with inclined piles, are provided for single‐battered piles, as well as for 2 × 2 and 3 × 3 groups of piles subjected to vertically incident plane shear S waves. Piles are modelled as linear‐elastic Bernoulli beams, whereas soil is assumed to be a linear, isotropic, homogeneous viscoelastic half‐space. Different pile group configurations, pile‐soil stiffness ratios, and rake angles are considered. The relevance and main trends observed in the influence of the rake angle on the kinematic interaction factors of the analysed foundations are inferred from the presented results. An important dependence of the kinematic interaction factors on the rake angle is observed together with the existence of an inclination angle at which cap rotation and excitation become out of phase in the low‐to‐mid frequency range. The existence of a small batter angle that provides minimum cap rotation is also shown. Copyright © 2014 John Wiley & Sons, Ltd.     

Experimental investigation of turbulent processes in a complex terrain

In the present paper the first results of the international KOPEX-86 experiment are presented. The experiment took place at the Kopisty Atmospheric Observatory of the Institute of Physics of the Atmosphere in Prague as part of a special project of the Commission of the Academy of Sciences in Planetary Geophysics (KAPG) in June and July 1986. Using 4 ultrasonic anemometers at 4 levels up to 80 m, Doppler-SODAR and wind-, temperature- and radiation balance gradients from 2 to 80 m, a complex investigation of the atmospheric boundary layer in an industrial area was made. The authors present the first results of

Generalized plasticity state parameter‐based model for saturated and unsaturated soils. Part 1: Saturated state

The behavior of granular materials is known to depend on its loose or dense nature, which in turns depends both on density and confining pressure. Many models developed in the past require the use of different sets of constitutive parameters for the same material under different confining pressures. The purpose of this paper is to extend a basic generalized plasticity model for sands proposed by Pastor, Zienkiewicz and Chan by modifying the main ingredients of the model flow—rule, loading–unloading discriminating direction and plastic modulus—to include a dependency on the state parameter. The proposed model is tested against the available experimental data on three different sands, using for each of them a single set of material parameters, finding a reasonably good agreement between experiments and predictions. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparison of Different Techniques of Tilt Testing and Basic Friction Angle Variability Assessment

A relevant parameter for estimating discontinuity shear strength is the basic friction angle, usually derived from different types of tilt tests. However, the tilt tests described in the literature produce varying basic friction angle values. From a large number of different types of tilt tests on different kinds of rocks, it was possible to conclude that the mechanisms of sliding along cylinder generatrixes and planar surfaces are quite different, and that tests based on sliding along generatrixes are not appropriate for determining reliable basic friction angle values for discontinuity planes. Tests on small specimens are also not recommended, for geometry reasons and because ensuring reliable stress conditions is difficult. To quantify the natural variability in tilt testing, large specimens of the same granite were tested. The results revealed coefficients of variation for the basic friction angle in the range of 5–10?%, a variability which is no greater than that found for other rock mechanics parameters. This observation enables to forward some recommendations concerning the appropriate number of tests needed to obtain reliable results.     

Central Paratethys paleoenvironment during the Badenian (Middle Miocene): evidence from foraminifera and stable isotope (δ<Superscript>13</Superscript>C and δ<Superscript>18</Superscript>O) study in the Vienna Basin (Slovakia)

Stable isotope data of the foraminiferal carbonate shells and bulk sediment samples from the Central Paratethys were investigated to contribute to better knowledge of the paleoenvironmental changes in Badenian (Middle Miocene). Five benthic (Uvigerina semiornata, U. aculeata, Ammonia beccarii, Elphidium sp. and Heterolepa dutemplei) and three planktonic taxa (Globigerina bulloides, G. diplostoma and Globigerinoides trilobus), characterising the bottom, intermediate and superficial layers of the water column, were selected from the Vienna Basin (W Slovakia). The foraminiferal fauna and its isotope signal point out to temperature-stratified, nutrient-rich and consequently less-oxygenated marine water during the Middle/Late Badenian. Negative carbon isotope ratios indicate increased input of ¹²C-enriched organic matter to the bottom of the Vienna Basin. Positive benthic δ¹⁸O implies that the global cooling tendency recorded in the Middle Miocene has also affected the intramountain Vienna Basin. In this time, the Central Paratethys has been in the process of isolation. Our stable isotope trend suggests that the communication with Mediterranean Sea has been still more or less active on the south of Vienna Basin (Slovak part) in the Late Badenian, whereas the seawater exchange towards north was apparently reduced already during the Middle Badenian.     

Decay rates of sunspot groups from 1874 to 1976

The global behaviour and fine structure of the distribution of sunspot decay rates from activity cycle 13 to 20 are presented. It is shown that the distribution of this parameter is lognormal. Statistically significantly lower values of decay rates are found in cycles 13, 14, and 18 for isolated spots. The complex groups had no appreciable changes.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Large-scale distribution of magnetic fields,green corona and prominences during an extended activity cycle

The interrelations of the latitudinal distribution of the coronal green emission maxima, maximal numbers and areas of prominences, magnetic fields, sunspots, and polar faculae in the 20th and 21st sunspot cycles have been investigated. It is again demonstrated how the behaviour of all studied data depends on their heliographic latitude. In the polar zone, well separated from the equatorial we observe following polarity magnetic fields transported only polewards, while the equatorial zone is occupied mostly by leading polarity fields, developed there, moving equatorwards, and crossing the equator to the other hemisphere with the new cycle during the minimum of sunspot activity.This magnetic field distribution is well emphasized by the places of maximal occurrence of prominences and by the distribution of coronal green emission maxima which also differ in dependence on latitude.The question of identifying the first and last evolutionary stages of an extended cycle of activity is discussed and the existence of a magnetic activity cycle lasting 15–17 years is suggested.