Evolution of induced fabric in a strain space multiple mechanism model for granular materials

The strain space multiple mechanism model idealizes the behavior of granular materials based on a multitude of virtual simple shear mechanisms oriented in arbitrary directions. Within this modeling framework, the virtual simple shear stress is defined as a quantity that depends on the contact distribution function as well as the normal and tangential components of inter‐particle contact forces, which evolve independently during the loading process. In other terms, the virtual simple shear stress is an intermediate quantity in the upscaling process from the microscopic level (characterized by the contact distribution and inter‐particle contact forces). The stress space fabric (i.e. the orientation distribution of the virtual simple shear stress) produces macroscopic stress through the tensorial average. Thus, the stress space fabric characterizes the fundamental and higher modes of anisotropy induced in granular materials. Comparing an induced fabric associated with the biaxial shear of plane granular assemblies obtained via a simulation using Discrete Element Method to the strain space multiple mechanism model suggests that the strain space multiple mechanism model has the capability to capture the essential features in the evolution of an induced fabric in granular materials. Copyright © 2012 John Wiley & Sons, Ltd.     

A new high-stress undrained ring-shear apparatus and its application to the 1792 Unzen–Mayuyama megaslide in Japan

Sassa and others in the Disaster Prevention Research Institute (DPRI), Kyoto University, developed a series of undrained ring-shear apparatus to physically simulate landslide initiation and motion, from DPRI-3 (Sassa 1992) to DPRI-7 (Sassa et al., Landslides 1(1):7–19, 2004). The maximum undrained capacities in the DPRI series ranged from 300 to 650 kPa. Sassa and others in the International Consortium on Landslides (ICL) have developed a new series of undrained ring-shear apparatus (ICL-1and ICL-2) for two projects of the International Programme on Landslides (IPL-161 and IPL-175). Both projects are supported by the Science and Technology Research Partnership for Sustainable Development Program (SATREPS) of Japan. ICL-1 was developed to create a compact and transportable apparatus for practical use in Croatia; one set was donated to Croatia in 2012. ICL-2 was developed in 2012–2013 to simulate the initiation and motion of megaslides of more than 100 m in thickness. The successful undrained capacity of ICL-2 is 3 MPa. This apparatus was applied to simulate possible conditions for the initiation and motion of the 1792 Unzen–Mayuyama megaslide (volume, 3.4?×?10⁸ m³; maximum depth, 400 m) triggered by an earthquake. The megaslide and resulting tsunami killed about 15,000 people. The Unzen Restoration Office of the Ministry of Land, Infrastructure and Transport (MLIT) of Japan systematically collected various papers and reports and published two summary leaflets: one in English in 2002 and an extended version in Japanese in 2003. Samples were taken from the source area (for initiation) and the moving area (for motion). The hazard area was estimated by the integrated landslide simulation model LS-RAPID, using parameters obtained with the ICL-2 undrained ring-shear apparatus. The estimated hazard area agrees reasonably with the landslide moving area reported in the Ministry leaflets.     

A low-carbon society: global visions,pathways, and challenges

The feasibility of two low-carbon society (LCS) scenarios, one with and one without nuclear power and carbon capture and storage (CCS), is evaluated using the AIM/Enduse[Global] model. Both scenarios suggest that achieving a 50% emissions reduction target (relative to 1990 levels) by 2050 is technically feasible if locally suited technologies are introduced and the relevant policies, including necessary financial transfers, are appropriately implemented. In the scenario that includes nuclear and CCS options, it will be vital to consider the risks and acceptance of these technologies. In the scenario without these technologies, the challenge will be how to reduce energy service demand. In both scenarios, the estimated investment costs will be higher in non-Annex I countries than in Annex I countries. Finally, the enhancement of capacity building to support the deployment of locally suited technologies will be central to achieving an LCS.

Policy relevance

Policies to reduce GHG emissions up to 2050 are critical if the long-term target of stabilizing the climate is to be achieved. From a policy perspective, the cost and social acceptability of the policy used to reduce emissions are two of the key factors in determining the optimal pathways to achieve this. However, the nuclear accident at Fukushima highlighted the risk of depending on large-scale technologies for the provision of energy and has led to a backlash against the use of nuclear technology. It is found that if nuclear and CCS are used it will be technically feasible to halve GHG emissions by 2050, although very costly. However, although the cost of halving emissions will be about the same if neither nuclear nor CCS is used, a 50% reduction in emissions reduction will not be achievable unless the demand for energy service is substantially reduced.     

Effect of atmospheric humic-like substances on the enhanced dissolution of volatile organic compounds into dew water

Simultaneous sampling of chlorinated hydrocarbons (CHs) and monocyclic aromatic hydrocarbons (MAHs), potentially harmful to humans and/or responsible for the formation of ozone and secondary particles, in dew water and in the ambient air was carried out from August 2004 to July 2005 in Hino City, situated in the western part of Greater Tokyo, Japan. CHs were less contained in dew water than MAHs. Toluene (volume-weighted mean concentration, VWM: 4.77 nM) and m,p-Xylenes (VWM: 5.07 nM) except dichloromethane, which was abnormally high (VWM: 1.14 μM), were abundant among eleven VOCs determined in dew water. Chloroform, carbon tetrachloride, 1,2-dichloroethane, and benzene were not detected in dew water during the study period. Dew water contained higher amounts of VOCs than would have been expected from the ambient gas-phase concentrations and the temperature-corrected Henry's law constants. Following the determination method of humic substances in river water proposed by Hiraide et al. [Hiraide, M., Shima, T., Kawaguchi, H., 1994. Separation and determination of dissolved and particulate humic substances in river water. Mikrochim. Acta 113, 269–276], the VWM of soluble humic and fulvic acid fractions in dew water was found to be 1.00 mg/L and 0.87 mg/L (n = 20), respectively, while the VWM of particulate humic and fulvic acid fractions was found to be 0.61 mg/L and 0.42 mg/L (n = 20), respectively. Surface tension decreased with an increase in dissolved fulvic acid fraction in dew water, indicating that humic-like substances with relatively lower molecular weight, which is soluble in acid solution, could be an effective surface-active species within dew water. The enrichment factors, which were defined as the ratio of the observed VOCs concentration to the estimated, were over 10² for MAHs except for benzene and increased as the increment of total humic-like substances (HULIS) concentration (the sum of humic and fulvic acid fractions in both dissolved and particulate form) normalized by total inorganic ion concentration in dew water. Our results indicate that total HULIS in dew water could enhance the dissolution of atmospheric VOCs into dew droplets.     

A model for the hydrogen coma of a comet

A model for the hydrogen coma of a comet on the basis of the Monte Carlo method is presented. In this model isotropic ejections of H atoms produced by photodissociation of H₂O and OH, thermalization of the H atoms due to collisions with ambient H₂O molecules, and the solar radiation pressure have been taken into account. A production spectrum of H atoms from OH is evaluated by using the predissociation rates and the level populations of OH, confirming that the spectrum has a sharp peak around 8.0 km sec^?1 with the standard deviation of 0.1 km sec^?1. Including the above effects, velocity distribution functions of the H atoms at various positions in the coma for the first time, as well as their density and outflow velocity profiles, have been calculated. It is pointed out that the collisional thermalization process in the inner coma is an important factor at small heliocentric distances in determining the density profiles and the velocity distributions. It is shown that thermalization leads to an increase in the H density in the inner coma larger than those expected from other models such as the vectorial model, in which collision is not taken into account. Lyman α isophotes and its line profiles in the optically thin region are computed by using the velocity distribution function.     

Rare gas isotopic compositions in natural gases of Japan

Isotopic and elemental compositions of rare gases in various types of gas samples collected in the Japanese Islands were investigated. Excess³He was found in most samples. Many samples showed a regionally uniform high³He/⁴He ratio of about 7 times the atmospheric ratio. The He concentrations varied from 0.6 to 1800 ppm, and they were low in CO₂-rich gases and high in N₂-rich gases. Ne isotopic deviations from the atmospheric Ne were detected in most volcanic gases. The deviations and the elemental abundance patterns in volcanic gases can be explained by a mixing between two components, one is mass fractionated rare gases and the other is isotopically atmospheric and is enriched in heavy rare gas elements. Ar was a mixture of mass fractionated Ar, atmospheric Ar and radiogenic Ar, and the contribution of radiogenic⁴⁰Ar was small in all samples. Except for He, elemental abundance patterns were progressively enriched in the heavier rare gases relative to the atmosphere. Several samples were highly enriched in Kr and Xe relative to the abundance pattern of dissolution equilibrium of atmospheric rare gases in water. The component which is highly enriched in heavy rare gases may be released from sedimentary materials in the crust.     

Partition of magnesium and iron between Olivine and spinel,and between pyroxene and spinel

Partition of Fe²⁺ and Mg between coexisting (Mg, Fe)₂SiO₄ spinel and (Mg, Fe)SiO₃ pyroxene was investigated at pressures 80 and 90 kbar and at temperatures 840 and 1050° C, using tetrahedral-anvil type of high pressure apparatus. Olivine-spinel solid solution equilibria in the system Mg₂SiO₄-Fe₂SiO₄ were discussed in the light of the partition reaction. Partition of Fe²⁺ and Mg in both olivine-spinel and pyroxene-spinel systems can not be regarded as that between ideal solid solutions. By applying the simple solution model for the partition of Fe²⁺ and Mg, sign of the heat of mixing was estimated to be positive for all olivine, spinel and pyroxene. Relative concentration of Fe²⁺ in spinel in the pyroxene-spinel system is likely to cause some change in the chemical composition of modified spinel () or spinel () in the transition zone of the mantle. A considerable change is also expected in the transition pressure of to ( + ) and ( + ) to .Presented at the symposium Recent Advances in the Studies of Rocks and Minerals at High Pressures and Temperatures held in Montreal, 1972. Jointly sponsored by the International Mineralogical Association and the Commission on Experimental Petrology.     

Step-like temperature fluctuations associated with inverted ramps in a stable surface layer

Ensemble averages of temperature before and after step-like temperature fluctuations reveal the presence of inverted ramps in a stable surface layer. Normalized frequency of upward steps increases with increasing stability, whereas normalized magnitude of the temperature step decreases with stability and becomes constant at about R _i = 1. These results suggest that the significance of temperature steps increases as stability increases. In moderate stability, the temperature pattern shows a gradual decrease after an upward step, which can be called a time-inverted ramp. Descending air and large downward heat flux are observed in a time-inverted ramp, suggesting a contribution from an ordered motion in wind. On the other hand, the temperature steps are related to gravity waves in strong stability.     

Photosynthesis-irradiance relationship of phytoplankton and primary production in the vicinity of Kuroshio warm core ring in spring

The light-saturated maximum value (P ^B _max) and initial slope (α) of the photosynthesis-irradiance (P-E) curve were examined in a warm streamer, a cold streamer and a warm core ring off the Sanriku area in the subarctic western North Pacific Ocean during an ADEOS/OCTS Sanriku field campaign in early May 1997. BothP ^B _max and α were within the ranges of temperate populations. A regional difference was apparent inP ^B _max: populations in the warm streamer tended to show higher value ranging between 1.92 and 4.74 mgC (mgChla)⁻¹h⁻¹ than those in the cold streamer and the warm core ring (1.35–2.87 mgC (mgChla)⁻¹h⁻¹). A depth variation was also observed in α in both the warm streamer and the warm core ring: shallow populations tended to have lower α than deep populations. The depth variations in bothP ^B _max and α resulted in a lower light intensity of the light saturation in a deeper population than that of a shallower one. These depth-related variations in the P-E parameters were likely a manifestation of “shade-adaptation” of photosynthesis. Photoinhibition was not observed over in situ surface light intensity varying below ca 1600 μmol photon m⁻²s⁻¹. Water-column primary productivity was biooptically estimated to be 233 to 949 mgC m⁻²d⁻¹ using vertical distributions of the P-E parameters, chlorophylla, phytoplankton light absorption and underwater irradiance. Applicability of surface data sets for estimation of water-column productivity is discussed.