The influence of 70 and 120 kHz tonal signals on the behavior of harbor porpoises (Phocoena phocoena) in a floating pen

Two harbor porpoises in a floating pen were subjected to five pure tone underwater signals of 70 or 120kHz with different signal durations, amplitudes and duty cycles (% of time sound is produced). Some signals were continuous, others were intermittent (duty cycles varied between 8% and 100%). The effect of each signal was judged by comparing the animals' surfacing locations and number of surfacings (i.e. number of respirations) during test periods with those during baseline periods. In all cases, both porpoises moved away from the sound source, but the effect of the signals on respiration rates was negligible. Pulsed 70kHz signals with a source level (SL) of 137dB had a similar effect as a continuous 70kHz signal with an SL of 148dB (re 1muPa, rms). Also, a pulsed 70kHz signal with an SL of 147dB had a much stronger deterring effect than a continuous 70kHz signal with a similar SL. For pulsed 70kHz signals (2s pulse duration, 4s pulse interval, SL 147dB re 1muPa, rms), the avoidance threshold sound pressure level (SPL), in the context of the present study, was estimated to be around 130dB (re 1muPa, rms) for porpoise 064 and around 124dB (re 1muPa, rms) for porpoise 047. This study shows that ultrasonic pingers (70kHz) can deter harbor porpoises. Such ultrasonic pingers have the advantage that they do not have a "dinner bell" effect on pinnipeds, and probably have no, or less, effect on other marine fauna, which are often sensitive to low frequency sounds.     

Effective fetch and non-linear four-wave interactions during wave growth in slanting fetch conditions

Wave growth in slanting fetch (with wind blowing obliquely off a coast) is investigated with 7 years worth of routine wave measurements in Lake IJssel in The Netherlands and with the SWAN wave model. Two aspects are considered in particular for this case: the validity of the concept of effective fetch and the role of the non-linear four-wave interactions. For slanting and parallel fetch conditions, we found some significant deviations from the effective fetch assumption, leading to 20–35% mismatch in either the peak period T_p or the significant wave height H_m0 respectively. However, the effect of discrepancies between various widely accepted wave growth formulas turned out to be even more important. The wave directions during slanting fetch are significantly ‘steered’ by the coastline, especially in the first kilometre(s) off the coast. The role of the non-linear four-wave interactions is investigated by running the SWAN (version 40.41) wave model with three different quadruplet formulations. Exact quadruplet methods (Xnl) yielded relatively strong wave steering, despite the four-wave interactions being relatively weak. Application of Xnl did not lead to better overall agreement with measurements — improvements for the mean wave period T_m01 were offset by some deterioration for the wave height H_m0.     

Large-scale dune erosion tests to study the influence of wave periods

Large-scale physical model tests were performed to quantify the effects of the wave period on dune erosion. Attention was focussed on 2D cross-shore effects in a situation with sandy dunes and extreme water levels and wave conditions. Besides profile measurements, detailed measurements in time and space of water pressure, flow velocities and sediment concentrations were performed in the near near-shore area. It was concluded that a longer wave period leads to a larger dune erosion volume and to a larger landward retreat of the dune face. Tests with double-peaked wave spectra showed that the influence of the spectral shape on dune erosion was best represented by the T_m − 1,0 spectral mean wave period, better than the peak wave period, T_p. The effect of the wave period on dune erosion was implemented in a dune erosion prediction method that estimates erosion volumes during normative storm conditions for the Dutch coast. More details of the measurements and additional analyses of physical processes are described in an accompanying paper by Van Thiel de Vries et al. [Van Thiel de Vries, J.S.M., van Gent, M.R.A., Reniers, A.J.H.M. and Walstra, D.J.R., submitted for publication. Analysis of dune erosion processes in large scale flume experiments, In this volume of Coastal Engineering.].     

Developing a building policy for the erosion zone: Solutions to some key (Dutch) questions

In those coastal communities where the most seaward strip of mainland consists of dunes, these dunes often serve as a flexible sea defence. In addition, this strip offers large potential for housing and commercial enterprises. Unfortunately, due to severe storm surges part of this strip (the erosion zone) is subject to erosion, and as a result of which any buildings or infrastructure located here, are destroyed. Therefore, as we will illustrate in this paper, a building policy for this zone should reflect a compromise between two opposite interests: exploitation of the existing potential and, prevention of an unacceptable high risk due to erosion. Accordingly, the authors have developed a framework for such a building policy on the basis of which the desirability of various different types of investments and the location within the erosion zone of such investments can be determined. The examples that are used to illustrate this framework in this paper are limited to experiences in The Netherlands as relevant data and experiences are available and relatively easy accessible here. Nevertheless, the approach as is described is generic and applicable worldwide suggesting that the discovered unused potential for exploitation is not just limited to The Netherlands.     

Extension of a qualitative model on nutrient cycling and transformation to include microtidal estuaries on wave-dominated coasts: Southern hemisphere perspective

Estuaries are dynamic transition zones acting as filters and transformers of nutrients passing from catchments to the sea. We propose an extension to an existing southern hemisphere model on nutrient dynamics in estuaries to include the relatively constricted, microtidal estuaries located along wave-dominated coasts in the region, specifically focusing on the limiting macronutrients nitrogen (N) and phosphorus (P) and on key processes, including physical (e.g. flushing, mixing and sedimentation), geochemical (e.g. flocculation), biochemical (e.g. remineralisation) and biological (e.g. primary production) processes. A simplified model of the physical states (primarily controlled by hydrological characteristics) is used as the basis for the qualitative model, where these are defined in terms of characteristic salinity-induced stratification of the water column, flushing time and the mouth condition. Four physical states are identified: a freshwater-dominated state, freshwater pulsed/recovery state, marine-dominated state and the closed mouth state. The states and their physical characteristics largely resemble that of the earlier model, except that the extended model reflects the dynamics of restricted inlets and introduces the closed mouth state. This model specifically explores the variation within southern African estuarine systems to better inform research and management programmes on the appropriate trophic, temporal and spatial scales at which uncertainties in ecosystem functioning need resolving. It can also be applied to other regions in the southern hemisphere, and even the northern hemisphere, with similar hydrological and estuarine geomorphological characteristics (e.g. the Mediterranean coast, the west coasts of North and South America, and the south-west and south-eastern coasts of Australia).     

Differential reproductive strategies of two bivalves in the Dutch Wadden Sea

Cerastoderma edule and Mya arenaria are two common bivalve species in European waters. Longevity and maximum size are much greater in the latter species. Because comparison of species life-history strategies states that a long life span (i.e. high annual survival) generally goes with lower fecundity, we hypothesise that reproductive output would be lower in M. arenaria than in C. edule. In the present paper, we studied the reproductive strategies of these two species in an intertidal and a subtidal area of the western Dutch Wadden Sea, by following seasonal changes in absolute and relative weights of somatic and gonadal tissues in these bivalves. Starting of spawning was similar in the two species, around May, except for intertidal M. arenaria, which initiated spawning in August. Individual energy investment in reproduction was similar for the two species but, unlike M. arenaria, C. edule spawned completely, releasing all energy of gonadal mass in the form of gametes. Mya arenaria used the gonad not only for reproduction but also for storage. In the intertidal area, we found a trade-off between longevity and reproduction, i.e. maximum reproductive output (expressed as a proportion of body mass) was higher in C. edule than in M. arenaria. However, since body size is larger and life span longer in M. arenaria than in C. edule, mean lifetime reproductive output per individual must be higher in the first than in the latter. Based on the differences in reproductive strategies of these two species, we hypothesise that the negative effects of warming climate on bivalve population dynamics in the Wadden Sea will be stronger in C. edule than in M. arenaria.     

Macroparasites of angelfish Brama brama (Bonnaterre, 1788) in the southern Benguela Current ecosystem

The angelfish Brama brama is a mesopelagic species distributed circumglobally in temperate to warm-temperate waters, including continental-shelf-edge and upper-slope waters of the Benguela Current ecosystem. Little is known about the parasite assemblage of Benguela B. brama, with only three parasite taxa having previously been documented from this species in the southern Benguela. This study describes the macroparasites recorded from 35 B. brama collected during research surveys off the west coast of South Africa in 2015 and 2016. A total of six macroparasite taxa were documented, including the nematode Anisakis pegreffii, the copepod Hatschekia conifera, the cestode Hepatoxylon trichiuri, an acanthocephalan from the genus Rhadinorhynchus, a monogenean from the family Diclidophoridae, and an unidentified species. Three of these (He. trichiuri, Rhadinorhynchus sp. and the unidentified species) had not previously been found to infect B. brama. The most prevalent macroparasite taxa were A. pegreffii (94%), the unidentified species (71%) and Ha. conifera (60%). Two of the parasites, Ha. conifera and He. trichiuri, showed seasonal variation in infection, and infection with the latter was positively correlated with host length. These findings increase our knowledge of B. brama biology and contribute to our understanding of the biodiversity of the southern Benguela ecosystem.     

Understanding the Role of Mass-Unloading in a Filament Eruption

We describe a partial filament eruption on 11 December 2011 that demonstrates that the inclusion of mass is an important next step for understanding solar eruptions. Observations from the Solar Terrestrial Relations Observatory-Behind (STEREO-B) and the Solar Dynamics Observatory (SDO) spacecraft were used to remove line-of-sight projection effects in filament motion and correlate the effect of plasma dynamics with the evolution of the filament height. Flux cancellation and nearby flux emergence are shown to have played a role in increasing the height of the filament prior to eruption. The two viewpoints allow the quantitative estimation of a large mass-unloading, the subsequent radial expansion, and the eruption of the filament to be investigated. A 1.8 to 4.1 lower-limit ratio between gravitational and magnetic-tension forces was found. We therefore conclude that following the loss-of-equilibrium of the flux-rope, the radial expansion of the flux-rope was restrained by the filamentary material until 70% of the mass had evacuated the structure through mass-unloading.     

Why chromatic imaging matters

During the last two decades, the first generation of beam combiners at the Very Large Telescope Interferometer has proved the importance of optical interferometry for high-angular resolution astrophysical studies in the near- and mid-infrared. With the advent of 4-beam combiners at the VLTI, the u ? v coverage per pointing increases significantly, providing an opportunity to use reconstructed images as powerful scientific tools. Therefore, interferometric imaging is already a key feature of the new generation of VLTI instruments, as well as for other interferometric facilities like CHARA and JWST. It is thus imperative to account for the current image reconstruction capabilities and their expected evolutions in the coming years. Here, we present a general overview of the current situation of optical interferometric image reconstruction with a focus on new wavelength-dependent information, highlighting its main advantages and limitations. As an Appendix we include several cookbooks describing the usage and installation of several state-of-the art image reconstruction packages. To illustrate the current capabilities of the software available to the community, we recovered chromatic images, from simulated MATISSE data, using the MCMC software SQUEEZE. With these images, we aim at showing the importance of selecting good regularization functions and their impact on the reconstruction.     

Micromorphological characteristics of glacimarine sediments: implications for distinguishing genetic processes of massive diamicts

Glacimarine diamicts are produced by diverse processes, and genetic differentiation is often problematic using macro-sedimentological criteria alone. Micromorphology offers a potentially helpful tool in such investigations. Macroscopically massive diamict samples of known glacimarine origin, from the Polar North Atlantic, Antarctica and north Irish Sea, were prepared for micromorphological analysis to (1) identify microstructures unique to different modes of sedimentation and (2) interpret genetic processes from those structures. The samples comprised examples of debris-flow, iceberg-turbate and suspension settling deposits from late Quaternary glacier-influenced marine environments: tidewater glacier, sub- or pro-ice shelf and continental slopes in front of ice stream termini. Results show two significant features of debris-flow sediments: a bimodal grain fabric of near-horizontal and -vertical grains, and laminated clay and silt coatings on sand and pebble grains. Coatings are best developed in sediments with finer grain-size distributions and in debris-flow sediments which have had relatively long run-out distances on trough-mouth fans, suggesting continuous rotation of grains in a buoyant, turbulent aqueous environment. This is significant because it precludes debris-flow delivery by plug flow. The micromorphology of iceberg turbate has not been described previously. It contains structures similar to those described in tills, so that unambiguous identification of these sediments seems unlikely based on micromorphological criteria alone. Suspension sediments range from fine-grained massive diamicts containing microfossils to more heterogeneous coarser sediments characterised by abrupt textural variations, from ice-distal and ice-proximal glacimarine environments respectively. The ice-proximal sediments contain fine vertical lineations marking the trajectories of dropstones through wet matrix. These dropstone tracks have not been reported in previous studies.