Interfacial instability of sand patterns induced by turbulent shear flow

When a turbulent shear flow above a plane sand surface entrains sand grains,it generates a variety of sand patterns.Fluvial sand forms two major interfacial patterns:meso-scale dunes and antidunes,and large-scale bars.Measurements have evidenced that under erosive conditions,meso-scale patterns either change to or coexist with large-scale patterns.However,it remains elusive what exactly drives the switching of interfacial patterns and how the switching occurs.Here,we showdcombing a flow model with a grain transport model,allowing for both the surface and suspended sand fluxes dthat the switching of patterns emerges from the shear-driven complex feedback between grain transport and topographic perturbations.The switching predominantly depends on the magnitudes of the Rouse number and the grain size to undisturbed flow depth ratio.The model offers quantitative predictions of the maximum amplification of sand patterns and unveils a new attraction erepulsion phenomenon.     

A three-scale cracking criterion for drying soils

Cracking is a most unwanted development in soil structures undergoing periodic drying and wetting. Desiccation cracks arise in an apparent absence of external forces. Hence, either an internal, self-equilibrated stress pattern resulting from kinematic incompatibilities, or a stress resulting from reaction forces at the constraints appear as a cracking cause, when reaching tensile strength. At a meso-scale, tubular drying pores are considered in the vicinity of a random imperfection, inducing a stress concentration in the presence of significant pore suction. This approach allows one to use the effective stress analysis, which otherwise, away from the stress concentration, usually yields compressive effective stress and hence a physically incompatible criterion for a tensile crack. Recent experiments on idealized configurations of clusters of grains provide geometrical data suggesting that an imperfection as a result of air entry deep into the granular medium penetrates over 4 to 8 internal radii of a typical pore could yield a tensile effective stress sufficient for crack propagation.     

The added value of joint PP–PS inversion for reservoir characterization: A case study using Jubarte PRM seismic data (offshore Brazil)

The added value of the joint pre-stack inversion of PP (incident P-wave and reflected P-wave) and PS (incident P-wave and reflected S-wave) seismic data for the time-lapse application is shown. We focus on the application of this technique to the time-lapse (four-dimensional) multicomponent Jubarte field permanent reservoir monitoring seismic data. The joint inversion results are less sensitive to noise in the input data and show a better match with the rock physics models calibrated for the field. Further, joint inversion improves S-impedance estimates and provides a more robust quantitative interpretation, allowing enhanced differentiation between pore pressure and fluid saturation changes, which will be extremely useful for reservoir management. Small changes in reservoir properties are expected in the short time between the time-lapse seismic acquisitions used in the Jubarte project (only 1 year apart). The attempt to recover subtle fourth-dimensional effects via elastic inversion is recurrent in reservoir characterization projects, either due to the small sensitivity of the reservoirs to fluid and pressure changes or the short interval between the acquisitions. Therefore, looking for methodologies that minimize the uncertainty of fourth-dimensional inversion outputs is of fundamental importance. Here, we also show the differences between PP only and joint PP–PS inversion workflows and parameterizations that can be applied in other projects. We show the impact of using multicomponent data as input for elastic seismic inversions in the analysis of the time-lapse differences of the elastic properties. The larger investment in the acquisition and processing of multicomponent seismic data is shown to be justified by the improved results from the fourth-dimensional joint inversion.     

Optimization of a Photo‐assisted Fenton Oxidation Process: A Statistical Model for MDF Effluent Treatment

In the present study, the effects of initial COD (chemical oxygen demand), initial pH, Fe²⁺/H₂O₂ molar ratio and UV contact time on COD removal from medium density fiberboard (MDF) wastewater using photo‐assisted Fenton oxidation treatment were investigated. In order to optimize the removal efficiency, batch operations were carried out. The influence of the aforementioned parameters on COD removal efficiency was studied using response surface methodology (RSM). The optimal conditions for maximum COD removal efficiency from MDF wastewater under experimental conditions were obtained at initial COD of 4000 mg/L, Fe²⁺/H₂O₂ molar ratio of 0.11, initial solution pH of 6.5 and UV contact time of 70 min. The obtained results for maximum COD removal efficiency of 96% revealed that photo‐assisted Fenton oxidation is very effective for treating MDF wastewater.     

Study on elastic response of structures to near-fault ground motions through record decomposition

Accelerograms recorded near active faults have some important characteristics that make them different from those recorded in far-fault regions. High-frequency components in acceleration records and long-period velocity pulses are among notable specifications of such ground motions. In this paper, a moving average filtering with appropriate cut-off frequency has been used to decompose the near-fault ground motions into two components having different frequency contents: first, Pulse-Type Record (PTR) that possesses long-period pulses; second, the relatively high-frequency BackGround Record (BGR), which does not include large velocity pulses. Comparing the results with those extracted through wavelet analysis shows that moving average filter is an appropriate and efficient tool for near-fault records decomposition. The method is applied to decompose a suite of 91 selected near-fault records and the elastic response of structures is examined through their response to the decomposed parts. The results emphasizes that in contrast with ordinary far-fault earthquake records, response spectra of near-fault ground motions typically have two distinct local peaks, which are representatives of the high- and low-frequency components, i.e., BGR and PTR, respectively. Moreover, a threshold period is identified below which the response of structures is dominated by BGR while PTR controls the response of structures with periods longer than this period.     

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

Camel grazing affects species diversity and community structure in the deserts of the UAE

Camel grazing plays a crucial role in the desert ecosystems of the UAE. In this study, we compare areas grazed by small antelope (Al Maha Resort – the AMR) with areas grazed by both camels and small antelope (Dubai Desert Conservation Reserve – the DDCR). A total of 126 plots were selected during the growing season 2006/07 on three soil substrates: gravel plains, sand flats and sand dunes. In each plot, several vegetation parameters were assessed: density, frequency, percent cover and diversity indices. The replacement of camels with wild antelope has significantly increased the number of species on gravel plains, vegetation density on sand dunes and diversity indices on both sand flats and sand dunes, but significantly decreased plant cover on sand flats and sand dunes. The increase in species diversity in the AMR was attributed to moderate grazing by antelope. Replacement of camels by antelope in the AMR has resulted in change in plant community composition of the three substrate types. Species recovered after protection from camel grazing are palatable, especially for camels, except Heliotropium kotschyi and Aerva javanica. The absence of most of the palatable species from the DDCR was attributed to both selective foraging and overgrazing by camels.     

The Role of Coffee in the Development of Southwest Ethiopia's Forests: Farmers' Strategies,Investor Speculation,and Certification Projects

This article examines the role of coffee in the agriculture of southwest Ethiopian highlands, a context characterized by recent huge private coffee estate developments, coffee certification projects and smallholdings. The analysis shows that smallholder farmers prioritize staple crops, and allocate land and labor to coffee only once food production objectives have been reached. It also underscores the diversity of the local peasantry, often treated as a homogeneous group in development projects designed to boost farmers' income through coffee production. Based on this analysis, the article evaluates the effects of recent coffee-oriented development policies: state forest concessions for coffee investment, and two coffee certification projects (UTZ-Certified and Fair-Trade/Organic). Because they omit the differentiated farmers' strategies, these certification initiatives fail to improve local populations' livelihoods and accelerate incipient socioeconomic inequalities. Moreover, when applied to big private plantations, they participate in farmers' dispossession from critical forest resources essential to households' food self-sufficiency.