Experimental survey of the hydrodynamic performance of a small spar buoy

The objective in this experimental work is to evaluate the capability of several cylindrical buoys to follow and measure waves. Eleven configurations have been studied, eight among which were furnished with disks of different diameters at the waterline. The experiments took place in the test basin at ISITV. On the one hand, we have obtained a set of transfer coefficients for each frequency and each configuration in regular waves. On the other hand, we have determined the corresponding transfer functions, then we have used the latter to measure irregular waves. The time signals as measured by the buoys with and without corrections have been compared with wave gage measurements and subjected to a wave-by-wave analysis. The results allow the conclusion that the buoy with a medium size disk constitutes the best compromise. In fact, it permits the buoy to follow the free surface while minimizing parasitic motions.     

Sunken wood habitat for thiotrophic symbiosis in mangrove swamps

Large organic falls to the benthic environment, such as dead wood or whale bones, harbour organisms relying on sulfide-oxidizing symbionts. Nothing is known however, concerning sulfide enrichment at the wood surface and its relation to wood colonization by sulfide-oxidizing symbiotic organisms.In this study we combined in situ hydrogen sulfide and pH measurements on sunken wood, with associated fauna microscopy analyses in a tropical mangrove swamp. This shallow environment is known to harbour thiotrophic symbioses and is also abundantly supplied with sunken wood. A significant sulfide enrichment at the wood surface was revealed. A 72 h sequence of measurements emphasized the wide fluctuation of sulfide levels (0.1–>100 μM) over time with both a tidal influence and rapid fluctuations. Protozoans observed on the wood surface were similar to Zoothamnium niveum and to vorticellids. Our SEM observations revealed their association with ectosymbiotic bacteria, which are likely to be sulfide-oxidizers. These results support the idea that sunken wood surfaces constitute an environment suitable for sulfide-oxidizing symbioses.     

Trace element geochemistry of CR chondrite metal

We report trace element analyses by laser ablation inductively coupled plasma mass spectrometry (LA‐ICP‐MS) of metal grains from nine different CR chondrites, distinguishing grains from chondrule interior (“interior grains”), chondrule surficial shells (“margin grains”), and the matrix (“isolated grains”). Save for a few anomalous grains, Ni‐normalized trace element patterns are similar for all three petrographic settings, with largely unfractionated refractory siderophile elements and depleted volatile Au, Cu, Ag, S. All three types of grains are interpreted to derive from a common precursor approximated by the least‐melted, fine‐grained objects in CR chondrites. This also excludes recondensation of metal vapor as the origin of the bulk of margin grains. The metal precursors were presumably formed by incomplete condensation, with evidence for high‐temperature isolation of refractory platinum‐group‐element (PGE)‐rich condensates before mixing with lower temperature PGE‐depleted condensates. The rounded shape of the Ni‐rich, interior grains shows that they were molten and that they equilibrated with silicates upon slow cooling (1–100 K h^?1), largely by oxidation/evaporation of Fe, hence their high Pd content, for example. We propose that Ni‐poorer, amoeboid margin grains, often included in the pyroxene‐rich periphery common to type I chondrules, result from less intense processing of a rim accreted onto the chondrule subsequent to the melting event recorded by the interior grains. This means either that there were two separate heating events, which formed olivine/interior grains and pyroxene/margin grains, respectively, between which dust was accreted around the chondrule, or that there was a single high‐temperature event, of which the chondrule margin records a late “quenching phase,” in which case dust accreted onto chondrules while they were molten. In the latter case, high dust concentrations in the chondrule‐forming region (at least three orders of magnitude above minimum mass solar nebula models) are indicated.     

TNOs are Cool: A Survey of the Transneptunian Region

Over one thousand objects have so far been discovered orbiting beyond Neptune. These trans-Neptunian objects (TNOs) represent the primitive remnants of the planetesimal disk from which the planets formed and are perhaps analogous to the unseen dust parent-bodies in debris disks observed around other main-sequence stars. The dynamical and physical properties of these bodies provide unique and important constraints on formation and evolution models of the Solar System. While the dynamical architecture in this region (also known as the Kuiper Belt) is becoming relatively clear, the physical properties of the objects are still largely unexplored. In particular, fundamental parameters such as size, albedo, density and thermal properties are difficult to measure. Measurements of thermal emission, which peaks at far-IR wavelengths, offer the best means available to determine the physical properties. While Spitzer has provided some results, notably revealing a large albedo diversity in this population, the increased sensitivity of Herschel and its superior wavelength coverage should permit profound advances in the field. Within our accepted project we propose to perform radiometric measurements of 139 objects, including 25 known multiple systems. When combined with measurements of the dust population beyond Neptune (e.g. from the New Horizons mission to Pluto), our results will provide a benchmark for understanding the Solar debris disk, and extra-solar ones as well.     

The Vema Transverse Ridge (Central Atlantic)

Transverse ridges are elongate reliefs running parallel and adjacent to transform/fracture zones offsetting mid-ocean ridges. A major transverse ridge runs adjacent to the Vema transform (Central Atlantic), that offsets the Mid-Atlantic Ridge by 320 km. Multibeam morphobathymetric coverage of the entire Vema Transverse ridge shows it is an elongated (300 km), narrow (<30 km at the base) relief that constitutes a topographic anomaly rising up to 4 km above the predicted thermal contraction level. Morphology and lithology suggest that the Vema Transverse ridge is an uplifted sliver of oceanic lithosphere. Topographic and lithological asymmetry indicate that the transverse ridge was formed by flexure of a lithospheric sliver, uncoupled on its northern side by the transform fault. The transverse ridge can be subdivided in segments bound by topographic discontinuities that are probably fault-controlled, suggesting some differential uplift and/or tilting of the different segments. Two of the segments are capped by shallow water carbonate platforms, that formed about 3–4 m.y. ago, at which time the crust of the transverse ridge was close to sea level. Sampling by submersible and dredging indicates that a relatively undisturbed section of oceanic lithosphere is exposed on the northern slope of the transverse ridge. Preliminary studies of mantle-derived ultramafic rocks from this section suggest temporal variations in mantle composition. An inactive fracture zone scarp (Lema fracture zone) was mapped south of the Vema Transverse ridge. Based on morphology, a fossil RTI was identified about 80 km west of the presently active RTI, suggesting that a ridge jump might have occurred about 2.2 m.a. Most probable causes for the formation of the Vema Transverse ridge are vertical motions of lithospheric slivers due to small changes in the direction of spreading of the plates bordering the Vema Fracture Zone.     

S2O, polysulfuroxide and sulfur polymer on Io's surface?

To settle the question of disulfur monoxide and sulfur monoxide deposition and occurrence on Io's surface, we performed series of laboratory experiments reproducing the condensation of S₂O at low temperature. Its polymerization has been monitored by recording infrared spectra under conditions of temperature, pressure, mixing with SO₂ and UV-visible radiation simulating that of Io's surface. Our experiments show that S₂O condensates are not chemically stable under ionian conditions. We also demonstrate that SO and S₂O outgassed by Io's volcanoes and condensing on Io's surface should lead to yellow polysulfuroxide deposits or to white deposits of S₂O diluted in sulfur dioxide frost (i.e., S₂O/SO₂ < 0.1%). Thus S₂O condensation cannot be responsible for the red volcanic deposits on Io. Comparison of the laboratory infrared spectra of S₂O and polysulfuroxide with NIMS/Galileo infrared spectra of Io's surface leads us to discuss the possible identification of polysulfuroxide. We also recorded the visible transmission spectra of sulfur samples resulting from polysulfuroxide decomposition. These samples consist in a mixture of sulfur polymer and orthorhombic sulfur. Using the optical constants extracted from these measurements, we show that a linear combination of the reflectance spectra of our samples, the reflectance spectrum of orthorhombic S₈ sulfur and SO₂ reflectance spectrum, leads to a very good matching of Io's visible spectrum between 330 and 520 nm. We conclude then that Io's surface is probably mainly composed of sulfur dioxide and a mixture of sulfur S₈ and sulfur polymer. Some polysulfuroxide could also co-exist with these dominant components, but is probably restricted to some volcanic areas.     

Existing Territories and Formalization of Territorial Use Rights for Moored Fish Aggregating Devices: The Case of Small-Scale Fisheries in the La Désirade Island (France)

Moored fish aggregating devices (MFADs) are used by small-scale fishers to access fish species difficult to harvest in large numbers. In the case of Guadeloupe (Caribbean area), the use of MFADs has increased considerably and this is causing congestion in these fishing areas and creating conflict between fishers. The aim of this article is to understand how informal fishing territories around the La Desirade Island were established and examine these territories through the lens of economic defendability theory. Results of semistructured interviews show that MFAD fishers display territoriality along MFAD tract lines forming quasi-privatized areas. Territoriality in this article is based on the following factors: the type of targeted resources, the cost of harvesting, the defending of territories, and the acknowledgment of territories by the fishing community. Conflicts and utilization of MFADs (overcapacity) have raised an opportunity to create co-managed legalized territorial use rights for fisheries.