Tectonometamorphic evolution of the Atbashi high‐P units (Kyrgyz CAOB,Tien Shan): Implications for the closure of the Turkestan Ocean and continental subduction–exhumation of the South Kazakh continental margin

The South Tien Shan (STS) belt results from the last collision event in the western Central Asian Orogenic Belt (CAOB). Understanding its formation is of prime importance in the general framework of the CAOB. The Atbashi Range preserves high‐P (HP) rocks along the STS suture, but still, its global metamorphic evolution remains poorly constrained. Several HP units have been identified: (a) a HP tectonic mélange including boudins of mafic eclogites in a sedimentary matrix, (b) a large (>100 km long) high‐P metasedimentary unit (HPMU) and (c) a lower blueschist facies accretionary prism. Raman Spectroscopy on carbonaceous material combined with phengite and chlorite multiequilibria and isochemical phase diagram modelling indicates that the HPMU recorded homogeneous P–T conditions of 23–25 kbar and 560–570°C along the whole unit. ⁴⁰Ar/³⁹Ar dating on phengite from the HPMU ranges between 328 and 319 Ma at regional scale. These ages are interpreted as (re‐) crystallization ages of phengite during T_max conditions at a pressure range of 20–25 kbar. Thermobarometry on samples from the HP tectonic mélange provides similar metamorphic peak conditions. Thermobarometry on the blueschist to lower greenschist facies accretionary prism indicates that it underwent P–T conditions of 5–6 kbar and 290–340°C, highlighting a 17–20 kbar pressure gap between the HPMU‐tectonic mélange units and the accretionary prism. Comparison with available geochronological data suggests a very short time span between the prograde path (340 Ma), HP metamorphic peak (330 Ma), the T_max (328–319 Ma) and the final exhumation of the HPMU (303–295 Ma). Extrusion of the HPMU, accommodated by a basal thrust and an upper detachment, was driven by buoyant forces from 70–75 km up to 60 km depth, which directly followed continental subduction and detachment of the HPMU. At crustal depths, extrusion was controlled by collisional tectonics up to shallow levels. Lithological homogeneity of the HPMU and its continental‐derived character from the North Tien Shan suggest this unit corresponds to the hyper‐extended continental margin of the Kazakh continent, subducted southward below the north continental active margin of the Tarim craton. Integration of the available geological data allows us to propose a general geodynamic scenario for Tien Shan during the Carboniferous with a combination of (a) N‐dipping subduction below the Kazakh margin of Middle Tien Shan until 390–340 Ma and (b) S‐dipping subduction of remaining Turkestan marginal basins between 340 and 320 Ma.     

P–T–t estimation of deformation in low‐grade quartz‐feldspar‐bearing rocks using thermodynamic modelling and 40Ar/39Ar dating techniques: example of the Plan‐de‐Phasy shear zone unit (Briançonnais Zone,Western Alps)

Pressure–Temperature–time (P–T–t) estimates of the syn‐kinematic strain at the peak‐pressure conditions reached during shallow underthrusting of the Briançonnais Zone in the Alpine subduction zone was made by thermodynamic modelling and ⁴⁰Ar/³⁹Ar dating in the Plan‐de‐Phasy unit (SE of the Pelvoux Massif, Western Alps). The dated phengite minerals crystallized syn‐kinematically in a shear zone indicating top‐to‐the‐N motion. By combining X‐ray mapping with multi‐equilibrium calculations, we estimate the phengite crystallization conditions at 270 ± 50 °C and 8.1 ± 2 kbar at an age of 45.9 ± 1.1 Ma. Combining this P–T–t estimate with data from the literature allows us to constrain the timing and geometry of Alpine continental subduction. We propose that the Briançonnais units were scalped on top of the slab during ongoing continental subduction and exhumed continuously until collision.     

Existing Territories and Formalization of Territorial Use Rights for Moored Fish Aggregating Devices: The Case of Small-Scale Fisheries in the La Désirade Island (France)

Moored fish aggregating devices (MFADs) are used by small-scale fishers to access fish species difficult to harvest in large numbers. In the case of Guadeloupe (Caribbean area), the use of MFADs has increased considerably and this is causing congestion in these fishing areas and creating conflict between fishers. The aim of this article is to understand how informal fishing territories around the La Desirade Island were established and examine these territories through the lens of economic defendability theory. Results of semistructured interviews show that MFAD fishers display territoriality along MFAD tract lines forming quasi-privatized areas. Territoriality in this article is based on the following factors: the type of targeted resources, the cost of harvesting, the defending of territories, and the acknowledgment of territories by the fishing community. Conflicts and utilization of MFADs (overcapacity) have raised an opportunity to create co-managed legalized territorial use rights for fisheries.     

Depositional environment of a Kimmeridgian carbonate 'black band' (Akkuyu Formation, south-western Turkey)

The Upper Jurassic Akkuyu Formation of south-western Turkey consists of pale-coloured carbonate facies, but includes a peculiar ‘black band’ at its base. In order to characterize the depositional environment of this level, a sedimentological, organic and inorganic geochemical study was performed on 30 samples. Three units are distinguished. Unit 1 consists of black marlstones, very rich in organic carbon (22–30%) with HI (hydrogen index) values around 600. The organic matter is an amorphous homogeneous material even at nanoscopic scale. This unit is also characterized by a very high concentration of V ( >1000 p.p.m.) and a δ¹³C_org value around ?26·5‰. Unit 2 shows thin-bedded black limestones with chert layers. Its organic content varies from 2% to 6%. As in unit 1, the HI values are uniformly high (600), and gas chromatography shows a high quantity of hopanes. The V concentration is also high (≈400 p.p.m.). The unit has a high Sr/Ca ratio, an organic carbon isotopic ratio close to ?28·7‰ and diffuse, nanoscopically amorphous organic material that is closely associated with pyrite. Unit 3 corresponds to the white limestones overlying the ‘black band’. This calcitic facies is almost devoid of organic carbon (<0·1%). The δ¹³C_org values are similar to those of unit 1 (?25·5‰ to ?26‰). Deposition occurred in a basinal environment surrounded by a carbonate platform. Primary productivity was high but not exceptional; terrestrial organic inputs were scarce. Bottom waters were probably euxinic during the deposition of unit 1. The presence of both hopane-rich and sulphur-rich nanoscopically amorphous organic matter may be the result of strong sulphate-reducing bacterial activity. Coupled with low amounts of iron, this led to intense vulcanization of the organic matter and thus good preservation. With the onset of unit 2 deposition, environmental conditions became less extreme, perhaps because of cooler water temperatures. Finally, the depositional conditions became oxic, leading to the accumulation of pale-coloured organic-poor limestones of unit 3.     

A case study of using Raman lidar measurements in high-accuracy GPS applications

This paper investigates the impact of rapid small-scale water vapor fluctuations on GPS height determination. Water vapor measurements from a Raman lidar are used for documenting the water vapor heterogeneities and correcting GPS signal propagation delays in clear sky conditions. We use data from four short observing sessions (6 h) during the VAPIC experiment (15 May–15 June 2004). The retrieval of wet delays from our Raman lidar is shown to agree well with radiosonde retrievals (bias and standard deviation (SD) were smaller than 1 and 2.8 mm, respectively) and microwave radiometers (from two different instruments, bias was 6.0/−6.6 mm and SD 1.3/3.8 mm). A standard GPS data analysis is shown to fail in accurately reproducing fast zenith wet delay (ZWD) variations. The ZWD estimates could be improved when mean post-fit phase residuals were removed. Several methodologies for integrating zenith lidar observations into the GPS data processing are also presented. The final method consists in using lidar wet delays for correcting a priori the GPS phase observations and estimating a scale factor for the lidar wet delays jointly with the GPS station position. The estimation of this scale factor allows correcting for a mis-calibration in the lidar data and provides in the same way an estimate of the Raman lidar instrument constant. The agreement of this constant with an independent determination using radiosonde data is at the level of 1–4%. The lidar wet delays were derived by ray-tracing from zenith pointing measurements: further improvement in GPS positioning is expected from slant path lidar measurements that would properly account for water vapor anisotropy.     

Effectiveness of servo struts in controlling excavation-induced wall deflection and ground settlement

Acta Geotechnica - Deformations in deep excavations can be controlled by providing adjustable support using servo struts; however, the design of strut positions and applied forces remains to be...     

Cross-borehole flowmeter tests for transient heads in heterogeneous aquifers

Cross-borehole flowmeter tests have been proposed as an efficient method to investigate preferential flowpaths in heterogeneous aquifers, which is a major task in the characterization of fractured aquifers. Cross-borehole flowmeter tests are based on the idea that changing the pumping conditions in a given aquifer will modify the hydraulic head distribution in large-scale flowpaths, producing measurable changes in the vertical flow profiles in observation boreholes. However, inversion of flow measurements to derive flowpath geometry and connectivity and to characterize their hydraulic properties is still a subject of research. In this study, we propose a framework for cross-borehole flowmeter test interpretation that is based on a two-scale conceptual model: discrete fractures at the borehole scale and zones of interconnected fractures at the aquifer scale. We propose that the two problems may be solved independently. The first inverse problem consists of estimating the hydraulic head variations that drive the transient borehole flow observed in the cross-borehole flowmeter experiments. The second inverse problem is related to estimating the geometry and hydraulic properties of large-scale flowpaths in the region between pumping and observation wells that are compatible with the head variations deduced from the first problem. To solve the borehole-scale problem, we treat the transient flow data as a series of quasi-steady flow conditions and solve for the hydraulic head changes in individual fractures required to produce these data. The consistency of the method is verified using field experiments performed in a fractured-rock aquifer.     

Measurement of the radius of Mercury by radio occultation during the MESSENGER flybys

The MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) spacecraft completed three flybys of Mercury in 2008–2009. During the first and third of those flybys, MESSENGER passed behind the planet from the perspective of Earth, occulting the radio-frequency (RF) transmissions. The occultation start and end times, recovered with 0.1 s accuracy or better by fitting edge-diffraction patterns to the RF power history, are used to estimate Mercury's radius at the tangent point of the RF path. To relate the measured radius to the planet shape, we evaluate local topography using images to identify the high-elevation feature that defines the RF path or using altimeter data to quantify surface roughness. Radius measurements are accurate to 150 m, and uncertainty in the average radius of the surrounding terrain, after adjustments are made from the local high at the tangent point of the RF path, is 350 m. The results are consistent with Mercury's equatorial shape as inferred from observations by the Mercury Laser Altimeter and ground-based radar. The three independent estimates of radius from occultation events collectively yield a mean radius for Mercury of 2439.2±0.5 km.     

Offshore experiments on styrene spillage in marine waters for risk assessment

Within the context of risk evaluation of chemical spillages into the marine environment, this paper reports on an offshore experiment to study the behaviour of styrene spilled into sea under natural conditions and discusses theoretical approaches. Floating structures were used to enclose the spillage and the gaseous cloud formation, and dissolution processes were in situ monitored. The identification of spill risks for man and marine environment through GESAMP's hazard profile is described for styrene: Styrene is rated as a chemical with a significant health hazard that will float but also evaporate. However, monitoring of the water column in the experiments showed that the concentration of styrene in water during the first hour represents 50% of the product spilled. For the potentially exposed public, the GESAMP hazard rating recommends the closure of beaches and evacuation. The risk assessment developed from experimental data confirms this safety advice.