Behaviour of subaqueous tunnels during earthquakes

Three-dimensional models of a subaqueous tunnel were built on a shaking table and vibrated for the purpose of investigating the dynamic behaviour of the tunnel. The material of the soft surface layer was gelatin gel and that of the tunnel was silicon rubber. In addition, earthquake observations at the site of the real subaqueous tunnel have been carried out using accelerometers and strain gauges set on the walls of the tunnel. At the site, micro-tremors were also measured. In these studies, it was noted that non-uniform displacements of the ground along the tunnel axis were caused by variations of the dynamic behaviour of the ground, and that the tunnel deforms correspondingly to the varying deformations of the ground. From these experimental results, a mathematical model of the subaqueous tunnel was formulated for anti-seismic design studies.     

Complexing capacity of the nutrient medium and its relation to inhibition of algal photosynthesis by copper

The toxic effect of copper on phytoplankton production is investigated in waters having different complexing capacities. It is demonstrated that a water’s complexing capacity does not guarantee that an equivalent amount of copper could be tolerated without adversely affecting algal production. Possible explanations for these findings are offered and discussed. It is deduced that ionic copper probably is already toxic to planktonic algae at concentrations of about 10^?10 mole/l.     

Organic facies and geochemical aspects in Neogene neritic sediments of the Takafu syncline area of central Japan: Paleoenvironmental and sedimentological reconstructions

Abstract Organic petrological observations of kerogen macerals and organic geochemical analyses of carbon isotopes of kerogen macerals and biomarkers were conducted on Neogene neritic sediments of the Takafu syncline area of central Japan. The Senmi, Sakainomiya and Lower Shigarami Formations in that area were deposited at the neritic provinces on the southern edge of the paleo‐Japan Sea during the Late Miocene to Early Pliocene. Sedimentary organic matter in these formations was almost terrigenous in origin. Changes in kerogen maceral compositions reflect sedimentological and tectonic histories evaluated in previous studies from sedimentary facies and paleontology. It was found that carbon isotope ratios (δ¹³C) of kerogen macerals increased from ?28‰ to ?25‰ from the Sakainomiya to the lower part of the Lower Shigarami Formations. The cause of that increase was presumably the expansion of C₄ plants into southwest Japan. The timing was concordant with that of the expansion of C₄ plant grasslands in East Asia. The oxicity (oxic to anoxic) conditions of sea bottoms evaluated from pristane/phytane ratios varied. Particularly, in the lower part of the Senmi Formation, layers in which no steroid biomarkers could be detected were found, and had presumably formed under oxic conditions when strong biodegradation had occurred. Concentrations of regular (C₂₇–C₂₉) steranes and dinosteranes were higher in the Sakainomiya and Lower Shigarami Formations. This indicates that dinoflagellates‐dominant primary productions were higher at those stages. In addition, concentrations of diatomaceous biomarkers such as C₂₆ norsterane increased from the Lower Shigarami Formation, thus adding diatoms to the major producers. Furthermore, similar associations between the increases of δ¹³C values of kerogen macerals and concentrations of diatomaceous biomarkers were observed in the Takafu syncline area. Thus, the expansion of C₄ plants was possibly associated with the high production of diatom in the shallow‐marine areas of the paleo‐Japan Sea during the Neogene Period.     

Towards medium-term (order of months) morphodynamic modelling of the Teign estuary, UK

The main objective of this paper is to address the principal mechanisms involved in the medium-term (order of months to years) morphodynamic evolution of estuaries through the application of a process-based numerical modelling. The Teign estuary (Teignmouth, UK) is the selected site. The system is forced by the macrotidal semi-diurnal tide in the English Channel and is perturbed to a minor extent by high river discharge events (freshets). Although waves have a definite influence on the adjacent coastal area, Wells (Teignmouth Quay Development Environmental Statement: Changes to Physical Processes. Report R.984c:140. ABP Marine Environmental Research Ltd., Southampton, 2002b) suggested that swell waves do not enter the estuary. Hence, wave effects are neglected in this study, as only tides and the river discharge are taken into account. The sediment grain size is highly variable, but mainly sandy. Within the frame of the COAST3D project (), four bathymetric surveys of the adjacent coastal area were carried out at a nearly weekly intervals. The outer estuary and the adjacent coastal area were also surveyed every 6 months as part of the COASTVIEW project (). Based on these data and on continuously measured parameters, such as water level, waves, wind and river discharge, numerical modelling of the morphodynamic processes can be tested. To replicate the morphological changes in the medium-term within a feasible simulation time, forcing conditions are reduced through the use of an input reduction method (called ensemble technique). In this study, simulations are based on the coupling between Telemac-2D and its non-cohesive sediment transport module, Sisyphe (version 5.3 for both modules). Three different sediment transport formulae were tested: (1) Engelund and Hansen (A monograph on sediment transport in alluvial streams, 3rd edn. Technological University of Denmark, Copenhagen, 1967) including the modifications proposed by Chollet and Cunge (J Hydraul Eng 17(1):1–13, 1979); (2) Bijker (Mechanics of sediment transport by the combination of waves and current. In: Design and reliability of coastal structures. 23rd international conference on Coastal Engineering, pp 147–173, 1968) and (3) Soulsby (Dynamics of Marine Sands. A manual for practical applications. HR Wallingford, Wallingford, p 142, 1997) modified version of van Rijn [J Hydraul Eng 110(10):1431–1456, 1984a, J Hydraul Eng 110(11):1613–1641, 1984b] formulation. Both a qualitative (i.e. visual comparison) and a quantitative tool [Brier Skill Score (BSS); described in Sutherland et al. in Coast Eng 51:917–939, 2004b] are applied to assess the similarity of simulations when compared to model predictions and observations. Tests confirmed the reliability and time efficiency of the ensemble technique, since it reproduced very well the results of a reference run, a computation based on the observed boundary conditions. For the spring-neap cycle modelled, the BSS was of 0.91 (a perfect modelling would have a BSS of 1), with a reduction in the simulation time on the order of 80%. For the 6-month-period simulation, results were also excellent: BSS=0.92 and a computer time reduction of 85%. In principle, this method has the advantage of being applied to any process-based numerical model.     

On-going orogeny in the outer-arc of the Timor–Tanimbar region, eastern Indonesia

The Timor–Tanimbar islands of eastern Indonesia form a non-volcanic arc in front of a 7 km deep fore-arc basin that separates it from a volcanic inner arc. The Timor–Tanimbar Islands expose one of the youngest high P/T metamorphic belts in the world, providing us with an excellent opportunity to study the inception of orogenic processes, undisturbed by later tectonic events.Structural and petrological studies of the high P/T metamorphic belt show that both deformation and metamorphic grade increase towards the centre of the 1 km thick crystalline belt. Kinematic indicators exhibit top-to-the-north sense of shear along the subhorizontal upper boundaries and top-to-the-south sense in the bottom boundaries of the high P/T metamorphic belt. Overall configuration suggests that the high P/T metamorphic rocks extruded as a thin sheet into a space between overlying ophiolites and underlying continental shelf sediments. Petrological study further illustrates that the central crystalline unit underwent a Barrovian-type overprint of the original high P/T metamorphic assemblages during wedge extrusion, and the metamorphic grade ranged from pumpellyite-actinolite to upper amphibolite facies.Quaternary uplift, marked by elevation of recent reefs, was estimated to be about 1260 m in Timor in the west and decreases toward Tanimbar in the east. In contrast, radiometric ages for the high P/T metamorphic rocks suggest that the exhumation of the high P/T metamorphic belt started in western Timor in Late Miocene time and migrated toward the east. Thus, the tectonic evolution of this region is diachronous and youngs to the east. We conclude that the deep-seated high P/T metamorphic belt extrudes into shallow crustal levels as a first step, followed by doming at a later stage. The so-called ‘mountain building’ process is restricted to the second stage. We attribute this Quaternary rapid uplift to rebound of the subducting Australian continental crust beneath Timor after it achieved positive buoyancy, due to break-off of the oceanic slab fringing the continental crust. In contrast, Tanimbar in the east has not yet been affected by later doming. A wide spectrum of processes, starting from extrusion of the high P/T metamorphic rocks and ending with the later doming due to slab break-off, can be observed in the Timor–Tanimbar region.     

Petrology and geochronology of basalt breccia from the 1996 earthquake swarm of Loihi seamount, Hawaii: magmatic history of its 1996 eruption

 Samples of basalt were collected during the Rapid Response cruise to Loihi seamount from a breccia that was probably created by the July to August 1996 Loihi earthquake swarm, the largest swarm ever recorded from a Hawaiian volcano. ²¹⁰Po–²¹⁰Pb dating of two fresh lava blocks from this breccia indicates that they were erupted during the first half of 1996, making this the first documented historical eruption of Loihi. Sonobuoys deployed during the August 1996 cruise recorded popping noises north of the breccia site, indicating that the eruption may have been continuing during the swarm. All of the breccia lava fragments are tholeiitic, like the vast majority of Loihi's most recent lavas. Reverse zoning at the rim of clinopyroxene phenocrysts, and the presence of two chemically distinct olivine phenocryst populations, indicate that the magma for the lavas was mixed just prior to eruption. The trace element geochemistry of these lavas indicates there has been a reversal in Loihi's temporal geochemical trend. Although the new Loihi lavas are similar isotopically and geochemically to recent Kilauea lavas and the mantle conduits for these two volcanoes appear to converge at depth, distinct trace element ratios for their recent lavas preclude common parental magmas for these two active volcanoes. The mineralogy of Loihi's recent tholeiitic lavas signify that they crystallized at moderate depths (∼8–9 km) within the volcano, which is approximately 1 km below the hypocenters for earthquakes from the 1996 swarm. Taken together, the petrological and seismic evidence indicates that Loihi's current magma chamber is considerably deeper than the shallow magma chamber (∼3–4 km) in the adjoining active shield volcanoes. Received: 21 August 1997 / Accepted: 15 February 1998     

Inclusion-trail geometry of albite porphyroblasts in a fold structure in the Sambagawa Belt, central Shikoku, Japan

The orientation of straight inclusion trails within albite porphyroblasts from basic schists has been measured around a north-closure fold, in the Besshi district of the Sambagawa Belt, central Shikoku, Japan. The porphyroblasts are aligned with their longest dimension parallel to both the subhorizontal, east–west-directed mineral lineation and to the fold axis. There is a systematic variation in inclusion-trail geometry between the upper (northern) and lower (southern) fold limbs. The shear sense deduced from quartz c-axis fabrics is top-to-the-west in the upper limb and top-to-the-east in the lower limb. Based on observed variations in porphyroblast inclusion trails, the structural history can be modelled as follows: (i) shear flow caused east–west stretching and folding of the metamorphic zonation; (ii) east–west ductile shear resulted in opposing senses of shear in the upper and lower limbs as the eclogite body situated in the core of the fold was extruded to the east.     

Geophysical Expression of Low Sulphidation Epithermal Au-Ag Deposits and Exploration Implications –Examples from the Hokusatsu Region of SW Kyushu, Japan–

Abstract: Low sulphidation epithermal Au-Ag deposits constitute a major exploration target for many mining companies worldwide. These deposits are commonly characterized by quartz vein systems which formed at temperatures often in the range 150–250°C giving rise to major alteration halos. Accompanying mineralization and associated alteration is the destruction and redistribution of magnetite in the host rocks and the formation of various K-bearing minerals such as adularia, illite and alunite. These alteration halos can often cover an area of at least several square kilometres and as such have the potential to be detected during reconnaissance geological surveys utilizing high resolution airborne aeromagnetic and radiometric sensors.
Analysis of airborne magnetic and radiometric data recently acquired over the Hokusatsu Region of SW Kyushu indicates that major low sulphidation epithermal Au-Ag deposits are characterized by several distinct geophysical features varying with the degree of post-mineralization cover and level of erosion. Several deposits coincide with extensive magnetic "flat" and high radiometric K–counts. In addition, several workers have shown that a very close association exists between Bouguer gravity highs and epithermal Au mineralization in the Hokusatsu Region. The combined use of areomagnetics, radiometrics and gravity data therefore provides an exceptionally effective approach to exploration for low sulphidation epithermal Au–Ag deposits in the Hokusatsu Region of Japan.     

From subduction to transform motion: a seabeam survey of the Hellenic trench system

Preliminary results of a multi-narrow beam survey of the Hellenic trench system, in the Eastern Mediterranean, are presented. The southwestern Ionian branch is divided in small basins, partly filled with Pleistocene sediments. The morphology suggests that the basins are deformed by a compressional stress acting roughly perpendicularly to the trench along N50°E. This direction is the direction of the regional slip vector of the shallow thrust-type earthquakes. The structure of the southeastern Pliny-Strabo branch is quite different. Narrow en-e´chelon slots, oriented N40°E, have been mapped within the main troughs oriented N60°E. The regional earthquake slip vector is also oriented along N40°E. We conclude that the Hellenic trench system is an active subduction system, dominated by thrust along the Ionian branch and by transform motion along the Pliny-Strabo branch.