Correlation between Expansion Rate of the Coronal Magnetic Field and Solar Wind Speed in a Solar Activity Cycle

Thirteen synoptic maps of expansion rate of the coronal magnetic field (CMF; RBR) calculated by the so-called ‘potential model’ are constructed for 13 Carrington rotations from the maximum phase of solar activity cycle 22 through the maximum phase of cycle 23. Similar 13 synoptic maps of solar wind speed (SWS) estimated by interplanetary scintillation observations are constructed for the same 13 Carrington rotations as the ones for the RBR. The correlation diagrams between the RBR and the SWS are plotted with the data of these 13 synoptic maps. It is found that the correlation is negative and high in this time period. It is further found that the linear correlation is improved if the data are classified into two groups by the magnitude of radial component of photospheric magnetic field, |B^pho_r|; group 1, 0.0 G ≦ |B_r^pho| < 17.8 G and group 2, 17.8 G ≦ |B_r^pho|. There exists a strong negative correlation between the RBR and the SWS for the group 1 in contrast with a weak negative correlation for the group 2. Group 1 has a double peak in the density distribution of data points in the correlation diagram; a sharp peak for high-speed solar wind and a low peak for low-speed solar wind. These two peaks are located just on the axis of maximum variance of data points in the correlation diagram. This result suggests that the solar wind consists of two major components and both the high-speed and the low-speed winds emanating from weak photospheric magnetic regions are accelerated by the same mechanism in the course of solar activity cycle. It is also pointed out that the SWS can be estimated by the RBR of group 1 with an empirical formula obtained in this paper during the entire solar activity cycle.     

Anomalously large seismic amplifications in the seafloor area off the Kii peninsula

Seismic wave amplifications were investigated using strong-motion data obtained from the ground’s surface (K-net) on the Kii peninsula (southwestern Japan) and from the network of twenty seismic stations on the seafloor (DONET) located off the peninsula near the Nankai trough. Observed seismograms show that seismic signals at DONET stations are significantly larger than those at K-net stations, independent of epicentral distances. In order to investigate the cause of such amplifications, seismic wavefields for local events were simulated using the finite-difference method, in which a realistic 3D velocity structure in and around the peninsula was incorporated. Our simulation results demonstrate that seismic waves are significantly amplified at DONET stations in relation to the presence of underlying low-velocity sediment layers with a total thickness of up to 10 km. Our simulations also show considerable variations in the degree of amplification among DONET stations, which is attributed to differences in the thickness of the sediment layers. The degree of amplification is relatively low at stations above thin sediment layers near the trough axis, but seismic signals are much more amplified at stations closer to the Kii peninsula, where sediment layers are thicker than those at the trough axis. Simulation results are consistent with observations. This study, based on seafloor observations and simulations, indicates that because seismic signals are amplified due to the ocean-specific structures, the magnitude of earthquakes would be overestimated if procedures applied to data observed at land stations are used without corrections.     

Shear zone vs folding origin for spiral inclusion trails in the Canton Schist

The three-dimensional geometry of spiral inclusion trails from the Canton Schist were measured to determine whether the spirals were a product of porphyroblast rotation within a shear zone, or porphyroblast growth during a series of overprinting fold events. The spiral inclusion trails are composed of three separate, sub-planar inclusion trail surfaces occupying texturally distinct parts of the porphyroblasts. These surfaces are correlated across a >10 km² area using textural criteria and relative timing. Measured patterns of inclusion trail orientation and asymmetry suggest they did not form by porphyroblast rotation within a non-coaxial shear zone. Rather, the porphyroblasts grew during three successive overprinting fold events (F₂–F₄), and the spiral inclusion trails represent the accumulated curvature associated with folding of successive axial plane foliations. The data show that spiral garnets are not peculiar to shear zones, and can form by overprinting crenulations and folds. This is consistent with the common occurrence of spiral garnets in multiply-deformed, regionally metamorphosed fold belts.     

Prestack depth imaging via model-independent stacking

Most seismic reflection imaging methods are confronted with the difficulty of accurately knowing input velocity information. To eliminate this, we develop a special prestack depth migration technique which avoids the necessity of constructing a macro-velocity model. It is based upon the weighted Kirchhoff-type migration formula expressed in terms of model-independent stacking velocity and arrival angle. This formula is applied to synthetic sub-basaltic data. Numerical results show that the method can be used to successfully image beneath basalts.     

Fossil fluid reservoir beneath a duplex fault structure within the Central Range of Taiwan: implications for fluid leakage and lubrication during earthquake rupturing process

In order to understand the kinematics which likely facilitated the speedy rupturing process of the 1999 Mw 7.6 Taiwan Chi-Chi earthquake, we examined exposed rocks in the Taiwan Slate belt, where the pressure and temperature conditions most resembled the hypocentre of the Chi-Chi earthquake, i.e. sub-greenschist facies. Field observations and composition analyses of the silicified vein-rich zones beneath the duplex structure suggest that impermeable slate layers may serve as cap rocks for confining deep-seated fluids. These fluids most likely come from the Taiwan metamorphic complex at deeper depths by the dehydration and decarbonation reactions (or partial melting). In addition, the gouge zone of a link fault above the detachment also indicates the presence of overpressured fluids during faulting. It is probable that episodic leakage of the confined fluid reservoirs may provide essential fluids for fault lubrication during earthquake ruptures.     

Effects on catchment water balance from the management of Pinus plantations on the coastal lowlands of south‐east Queensland,Australia

A paired catchment study was conducted over a 10‐year period on the hydrology of an exotic Pinus plantation in the coastal lowlands of south‐east Queensland, Australia. Each catchment was instrumented with a stream monitoring station, tipping bucket rain gauge, and a network of piezometers to monitor the shallow perched water table. After a 6‐year calibration period a harvest treatment was imposed on one catchment (Review): clearfelling approximately 90% of the catchment area, which contained a mature (44‐year‐old) Pinus elliottii plantation. This subsequently was re‐established with a second rotation plantation of a hybrid of P.elliottii × P.caribaea var. hondurensis. The control catchment (Crayfish) contained a P. elliottii plantation similar to that clearfelled at Review. The post‐harvest period was monitored for a further 4 years. Evapotranspiration was found to be the major output flux, with stream flow only a minor component of the study catchments' water budget. Areas with gleyed podzolic soils were found to remain waterlogged for periods up to 7 months following the seasonally high summer rainfall period, with other soils having water logging periods of only a few months. Little change was observed in waterlogging characteristics following harvesting, in contrast to stream flow which increased for 3 years but with evidence of a decline after 5 years. The perched‐watertable piezometric surface indicated that its lateral drainage differs from that of surface flows; the perched‐watertable drainage fluxes from the study catchments seem minor and off‐site movement of solutes (e.g. nutrients and contaminants) via them would be limited. It was identified that the interaction between the perched and deep aquifers was poorly understood, as well as the relative importance of the soil moisture storage of the aquitard clay layer between them. It was concluded that there is a need to undertake more detailed analysis using modelling, and to obtain additional field data on soil‐layer properties and piezometric levels of the deep aquifer. Copyright © 2002 John Wiley & Sons, Ltd.     

Dynamic response of flexible rockfall barriers under different loading geometries

Flexible steel barriers are commonly constructed on steep hillsides to mitigate rockfall. The evaluation of the dynamic response of proprietary flexible barriers is conventionally performed using full-scale field tests by dropping a weight onto the barriers in accordance with the European test standard ETAG 27. The weight typically has a spherical or polyhedral shape and cannot reproduce more complex rockfall scenarios encountered in the field. A rigid slab may load a barrier over a larger area and its effect has not been investigated. In this study, a calibrated three-dimensional finite-element model was developed to study the performance of vertically and horizontally orientated rockfall barriers under concentrated areal impact loads. A new bilinear force-displacement model was incorporated into the model to simulate the behavior of the energy-dissipating devices on the barriers. The effect of different weight geometries was studied by considering impacts by a rigid single spherical boulder and a rigid slab. Results reveal that areal loading induced by a rigid slab increases the loading on the barrier foundation by up to 40 % in both horizontally and vertically positioned barriers when compared to a concentrated load scenario with a single boulder. This indicates that barriers tested under the current test standard does not give the worst-case scenario in terms of foundation loads, and barrier designers should take into account the possible effect of increased foundation loads by reinforcing the barrier posts and/or increasing their spacing.     

Variable microstructure of peridotite samples from the southern Mariana Trench: Evidence of a complex tectonic evolution

We retrieved samples of peridotite from a dredge haul (KH92-1-D2) collected during Cruise KH92-1 undertaken by the research vessel (R/V) Hakuho in 1992 at the landward trench slope of the southern Mariana Trench (11°41.16′N, 143°29.62′E; depth 6594–7431 m), which is the deepest ocean in the world. Ten of 30 retrieved samples possessed both a foliation and lineation, as assessed from 46 thin sections of various orientations and observations of hand samples. The samples showed marked variation in microstructure, ranging from coarse (> 5 mm) equigranular and intensely elongated textures to finer (< 1 mm) porphyroclastic and fine-grained equigranular textures. Olivine fabrics also varied among the different samples, with (010)[100] and (010)[001] patterns (termed A- and B-type, respectively) observed in samples with coarse textures and no clear patterns observed in samples with fine textures. Even though the peridotite samples were retrieved from a single dredge site, some contain primary tectonic microstructures and some contain secondary microstructures. Recent bathymetric and topographic analyses indicate that the lithosphere in this region is as thin as 20 km. Such a thin lithosphere may have been intensely deformed, even perhaps in the ductile regime, during fore-arc extension; consequently, the observed variations in microstructure within the peridotite samples probably reflect the complex tectonic evolution of the southern Mariana region.     

Dissolved and particulate trace metals in meltwater from the Rhône glacier

Glacial meltwater and sediment at the source of the River Rhône have been analyzed to determine: 1. the partitioning of Al, Cd, Co, Cu, Cr. Fe, Mn, Ni, Pb and Zn between the water and particulate phase. 2. the particle size ranges which affect the dissolved trace metal ion composition of the meltwater and 3. the availability (potential release) of the ten trace metal ions from the sediment. Greater than 80% of the total Cd, Cu, Mn, Ni and Zn were found to be in operationally-defined (0.4 μm) dissolved forms. Fe and Al in the meltwater are primarily associated with particles in the size range 0.4–8 μm, while Cd. Cu, Mn, Ni and Zn occur with particles smaller than 0.1 μm. For the sediment, Cu, Ni and Pb were significantly present as exchangeable forms; only Cu, Ni, Pb and Zn were determined as organicallybound forms.