Spatial assessment and redesign of a groundwater quality monitoring network using entropy theory, Gaza Strip, Palestine

Using entropy theory, a methodology was developed for the evaluation and redesign of groundwater quality monitoring wells in the Gaza Strip in Palestine. Essential to the methodology is the development of a Transinformation Model (TM) which yields the amount of information transfer and the dependency between the wells as a function of distance. The TM parameters, such as the minimum transinformation and the range, were employed for evaluating the network which revealed that most of the distances between wells were less than the range. It also indicated that a high percentage of redundant information existed in the network. Therefore, the network was reduced by superimposing a square pattern over the monitored area and selecting one well per square block in a stratified pattern. The methodology was tested using the chloride data collected from 1972–2000 from 417 groundwater quality monitoring wells in the Gaza Strip. The number of the groundwater quality monitoring wells in the Gaza Strip was reduced by 53%, while there was 26% redundant information based on the minimum existing distance between wells. This methodology is meant to help monitor the groundwater quality (salinity) in the Gaza Strip.     

Ammonium regeneration in intertidal sediments of the Yangtze estuary during air-exposure

The influences of exposure to the atmosphere on ammonium cycle in the intertidal surface sediments were in situ studied with a geochemical approach at a typical station in the Yangtze Estuary during three tidal cycles in September 2003. During an about 8-h emersion period of each diurnal tide, six high-resolution vertical profiles of adsorbed and dissolved ammonium were measured. It was observed that both adsorbed and dissolved ammonium generally had an increasing trend in sediment cores during the exposure. The rate of ammonium regeneration in sediments was estimated using the accumulation amount of ammonium including adsorbed and soluble fractions during the daytime emersion. The calculation result showed that there was relatively high ammonification rate (˜500 nmol N cm⁻³ day⁻¹), which reflected that organic nitrogen in sediments was quickly decomposed with a residence time of ˜52.7 days. Due to the dramatic temperature difference observed in sediment profiles, free convection was considered an important mechanism of regulating the efflux of produced ammonium into overlying waters. The total estimated amount of regenerated ammonium was ˜1.35×10⁵ t N year⁻¹ in the intertidal flat of the Yangtze Estuary, which occupied 7.6% of the total inorganic nitrogen annually transported to the estuarine ecosystem.     

Rates of Deglaciation during the Last Glaciation and Holocene in the Cordillera Vilcanota-Quelccaya Ice Cap Region, Southeastern Perú

Moraine chronology is combined with digital topography to model deglacial rates of paleoglacier volumes in both the Huancané Valley on the west side of the Quelccaya Ice Cap and the Upismayo Valley on the northwest side of the Cordillera Vilcanota. The fastest rates of deglaciation (39×10⁻⁵ to 114×10⁻⁵ km³ yr⁻¹ and 112×10⁻⁵ to 247×10⁻⁵ km³ yr⁻¹ for each valley, respectively) were calculated for the most recent paleoglaciers, corresponding to the last few centuries. These results are consistent with observations in the Venezuelan Andes showing high rates of deglaciation since the Little Ice Age. These rates also fall within the range of 20th century rates of deglaciation measured on the Quelccaya Ice Cap (29×10⁻⁵ to 220×10⁻⁵ km³ yr⁻¹, Brecher and Thompson, 1993; Thompson, 2000). These results imply that rates of deglaciation may fluctuate significantly over time and that high rates of deglaciation may not be exclusive to the late 20th century. Equilibrium line altitude (ELA) depressions for the ice volumes of the last glaciation modeled here were computed as 230 m for the Quelccaya Ice Cap and 170 m for the Cordillera Vilcanota. Maximum ELA depressions are lower than previously published: <500 m for the Cordillera Vilcanota and <400 m for the Quelccaya Ice Cap. These lower values could imply a topographic control over paleoglacier extent.     

湖南印支期过铝质花岗岩的形成: 岩浆底侵与地壳加厚热效应的数值模拟

在合理构建华南印支期地质-物理模型的基础上, 利用FLAC软件, 模拟了该区印支期过铝质富钾花岗岩形成与基性岩浆底侵, 及陆壳变形叠置加厚两种动力学背景的可能联系. 模拟结果表明, 220 Ma±的基性岩浆底侵能导致地壳含水矿物相岩石的深熔, 但除非印支期存在大规模基性岩浆的底侵作用, 否则其热效应持续时间和热效应波及范围难以形成具大岩基规模的湖南印支期花岗岩. 在陆壳叠置加厚模型中, 地壳的叠置加厚可导致中下地壳界面温度升高到700℃以上, 引起片麻质岩石熔融, 当加厚因子达1.3, 白云母矿物脱水熔融产生的熔体达到熔体流动临界比例(≥20%), 从而形成花岗岩基; 结合印支期挤压逆冲推覆构造和同期基性火山岩极少出露的地质事实, 认为陆壳变形加厚可能是湖南印支期构造岩浆作用形成的主导因素.     

Mathematical modeling of PCB bioaccumulation in Perna viridis

In the present work, we built a mathematical model of polychlorinated biphenyl (PCB) bioaccumulation in Perna viridis, namely, a one-compartment model with a time dependent incorporation rate R (μg g⁻¹ lipid per ppb water per day), with positive substrate cooperativity as the underlying physical mechanism. The temporal change of the PCB concentration Q (μg g⁻¹ lipid) in the soft tissues of the mussel depends on the competition of the input rate RW and the output rate kQ, where W is the concentration of PCB in water (ppb water) and k is the elimination rate (per day). From our experimental data, k=0.181±0.017 d⁻¹. The critical concentration in water W_c for positive substrate cooperativity was found to be 2.4 ppb. Below W_c, R is a constant. For a water concentration of 0.5 ppb Aroclor 1254, R=24.0±2.4 μg g⁻¹ lipid ppb⁻¹ d⁻¹. Above W_c, positive substrate cooperativity comes into effect and R becomes a function of time and dependent on the concentration Q in a form R=γQ/(Q+δ). This is the case for a water concentration of 5 ppb Aroclor 1254, where γ=15.1 μg g⁻¹ lipid ppb⁻¹ d¹ and δ≈200 μg g⁻¹ lipid. From this model, the uptake is exponentially increasing when the PCB concentration in the mussel is small compared to 200 μg g⁻¹ lipid, and hyperbolically increasing when the concentration is large compared to 200 μg g⁻¹ lipid, which are consistent with the experimental data. The model is useful for understanding the true processes taking place during the bioaccumulation and for risk assessment with higher confidence. Future experimental data which challenge the present model are anticipated and in fact desirable for improvement and perfection of the model.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

Models of passive margin inversion: implications for the Rhenohercynian fold-and-thrust belt, Belgium and Germany

Positive tectonic inversion is related to the transmission of compressional stresses along a décollement into the foreland of an orogenic zone. This stress and strain concentration in regions remote from the main orogenic front is commonly related to the presence of pre-existing rheological heterogeneities such as normal syn-depositional faults. During inversion, these pre-existing normal faults are reactivated as reverse faults. Tectonic inversion in the Rhenohercynian fold-and-thrust belt during the Variscan Orogeny shows that inversion is likely synchronous with the onset of collision in the hinterland. Here, we present the results of a simplified thermo-mechanical model (STM) which allows one to study strain partitioning between two orogenic zones. We show that, if the two orogenic zones have the same mechanical properties, the viscosity of the décollement, which links them, controls the initial strain partitioning. During subsequent finite shortening, erosional processes determine the partitioning of strain rate. The presence of a weak structure in the inverted zone and of a low-viscosity décollement leads to initial strain concentration in the inverted track rather than in the collision zone and a progressive decrease in strain partitioning between the two orogenic zones. The STM results are in good agreement with results of a 2D finite-element model. We conclude that, in the western part of the Rhenohercynian Massif, simultaneous uplift and deformation within the Mid-German Crystalline Rise (the main collision zone) and the Ardenne Anticlinorium (the inverted zone) lead to interpreting this orogenic event as a case of vice tectonic rather than the propagation of a ‘wave of folding’ towards the Variscan front, as suggested by previous authors.     

Model-independent Travel-time Attributes for 2-D, Finite-offset Multicoverage Reflections

— In this paper, we provide a 5-parameter stacking formula to transform 2-D prestack data into a particular common-offset section. This requires the knowledge of the near-surface velocity only and it is expected that ray theory holds to describe primary reflections. The earth model can be arbitrarily inhomogeneous. The new stacking approach can be viewed as a generalization of the 3-parameter common-reflection-surface (CRS) stack, by which 2-D multicoverage data are stacked into a simulated zero-offset section. The new 5-parameter formula can handle P-P, P-S and S-S reflections.