Response of large-scale coastal basins to wind forcing: influence of topography

Because wind is one of the main forcings in storm surge, we present an idealised process-based model to study the influence of topographic variations on the frequency response of large-scale coastal basins subject to time-periodic wind forcing. Coastal basins are represented by a semi-enclosed rectangular inner region forced by wind. It is connected to an outer region (represented as an infinitely long channel) without wind forcing, which allows waves to freely propagate outward. The model solves the three-dimensional linearised shallow water equations on the f plane, forced by a spatially uniform wind field that has an arbitrary angle with respect to the along-basin direction. Turbulence is represented using a spatially uniform vertical eddy viscosity, combined with a partial slip condition at the bed. The surface elevation amplitudes, and hence the vertical profiles of the velocity, are obtained using the finite element method (FEM), extended to account for the connection to the outer region. The results are then evaluated in terms of the elevation amplitude averaged over the basin’s landward end, as a function of the wind forcing frequency. In general, the results point out that adding topographic elements in the inner region (such as a topographic step, a linearly sloping bed or a parabolic cross-basin profile), causes the resonance peaks to shift in the frequency domain, through their effect on local wave speed. The Coriolis effect causes the resonance peaks associated with cross-basin modes (which without rotation only appear in the response to cross-basin wind) to emerge also in the response to along-basin wind and vice versa.     

Energy balance closure for the LITFASS-2003 experiment

In the first part, this paper synthesises the main results from a series of previous studies on the closure of the local energy balance at low-vegetation sites during the LITFASS-2003 experiment. A residual of up to 25% of the available energy has been found which cannot be fully explained either by the measurement uncertainty of the single components of the surface energy balance or by the length of the flux-averaging period. In the second part, secondary circulations due to heterogeneities in the surface characteristics (roughness, thermal and moisture properties) are discussed as a possible cause for the observed energy balance non-closure. This hypothesis seems to be supported from the fluxes derived from area-averaging measurement techniques (scintillometers, aircraft).     

Production of gas from coal seams in the Upper Silesian Coal Basin in Poland in the post-injection period of an ECBM pilot site

A pilot site for CO₂ storage in coal seams was set-up in the Upper Silesian Coal Basin in Poland in the scope of the RECOPOL project, funded by the European Commission. About 760 tons CO₂ were injected into the reservoir from August 2004 to June 2005. Breakthrough of the injected CO₂ was established, which resulted in the production of about 10% of the injected CO₂ in this period. This paper reports on activities performed under the European Commission project MOVECBM that aimed at the assessment of the storage performance of the reservoir in the follow-up period, i.e. whether the injected CO₂ was adsorbed onto the coal or whether it was still present as free gas in the pore space. The injection well was used for this purpose, as the production well had to be abandoned for permitting reasons. Several operational periods can be defined between the last injection in June 2005 and the abandonment of the well in October 2007. In the first period the well was shut-in to observe the pressure fall-off, from about 15.0 MPa at the wellhead after the last injection until about 4.5 MPa at the end of 2005. This pressure fall-off curve showed that the reservoir permeability was very low. This seemed to confirm the observed swelling of the coal during the injection period. In the first months of 2006 the pressure at the wellhead was decreased by releasing gas in a controlled way. The amount and composition of the gas were measured. As a result of the pressure reduction, the well flooded with water. A production pump was placed on the former injection well, enabling active production from the coal from March to September 2007. Results of these operations showed that whereas the gas production rates were as expected based on the experience with the production well, the water production was remarkably low. This could be related to permeability issues or, alternatively, indicate a drying effect of the CO₂ in the reservoir. Further, the gas composition showed a predominance of CO₂ over CH₄ during the gas release that changed gradually into a predominance of CH₄ over CO₂ during the production phase. Although stabilization was not reached within the given production period, the composition approached a 60% methane, 40% CO₂ ratio. This indicates that the exchange of these gases is more complex than often envisaged. After removal of the pump the well was filled with water, which ceased the gas release. This indicates that the pressure in the reservoir was back to its original, hydrostatic, state. As the total volume of CO₂ produced was only a fraction of the amount that was injected, it can be concluded that the CO₂ was taken up by the coal and is currently adsorbed. This gives confidence in the long-term stability of the injected CO₂.     

Observations Of The Morning Transition Of The Convective Boundary Layer

The morning transition between the stable nocturnal situation and the daytime convective boundary layer (CBL) is of interest both for basic understanding and for initializing prognostic models. While the morning growth phase of the CBL has been studied in detail, relatively little has been published on the transition itself. In this paper, conventional observations of surface temperature, humidity, and turbulent fluxes,and data from a meteorological tower, are combined with measurements of the onset of convection by boundary-layer wind profilers to explore the timing and behaviour of the transition period. The transition is defined here as the period between sunrise and the time at which the depth ofconvection reaches about 200 m AGL. Diagnostic relationships based on surface heat flux, the temperature difference between 2 m and 200 m, and bulk Richardson number are explored. The transition is foundto be enabled by surface heating relaxing the surface stability, while the warming of the layerbetween 2 m and 200 m is in large part due to shear-driven entrainment.     

Post-colonial nature conservation in Southern Africa: same emperors, new clothes?

This paper analyses and evaluates the bordering and othering impacts of environmental geopolitical discourse on land conservation in Southern Africa. Through a theoretical in-depth analysis of the use and contents of the term conservation, this paper examines how conservation is determined, instrumentalized and interpreted by the state, international governmental and non-governmental institutions, and specific interest groups including neo-liberal capitalists and local communities especially in the developing world context. In particular, we discuss the impact of current transboundary park-like conservation practices in Southern Africa and how these feed into the continuous attempts to colonise Southern Africa's nature. Native Americans were not mistaken when they accused the Whites of having forked tongues. By separating the relations of political power from the relations of scientific reasoning while continuing to shore up power with reason and reason with power, the moderns have always had two irons in the fire. They have become invincible. (Latour, 1993, p. 38) Since most of us live in a hierarchical society, any discourse on wildlife tends to be about social relationships. Whom can we exclude from our Garden of Eden, and how can we keep `others' from trespassing on valuables that help sustain our life and livelihoods, if not our identities. Marks (1994, p. 120) ...it could be argued that binary divisions are deeply etched into social space and it is a deeper understanding of boundary erection and distancing that is required if we are to provide alternatives to exclusion and conflict (Sibley, 2001, p. 240).     

Insufficiency of compaction disequilibrium as the sole cause of high pore fluid pressures in pre-Cenozoic sediments

The method of indirect demonstration is used to investigate if compaction disequilibrium can account for high overpressures that occur in Mesozoic and older basin formations. First the equations governing compaction disequilibrium are analysed for the factors controlling overpressure levels. Then limiting values of these control parameters are sought which favour high fluid pressures. The analysis shows why 'close-to-lithostatic fluid pressures' in pre-Cenozoic basin units are difficult to attain by compaction disequilibrium alone. Subsequently, the limiting favourable conditions are used in a series of generic numerical model experiments. The experiments serve as templates to construct the upper bounds of overpressures due to sediment loading for most geological settings including those where shale seals have developed. Two regional examples are studied in some detail. It is shown that observed overpressures in Mesozoic strata on the Scotian Shelf can be explained by compaction disequilibrium, but require the limiting values assigned to the properties of shale. For the Central North Sea Graben these limiting conditions are not sufficient, providing evidence for an active role of other pressure-generating mechanisms.
     

Subsidenz und tektonik des Saar-Nahe-Beckens (SW-Deutschland)

The Saar-Nahe-Basin in SW-Germany is one of the largest Permo-Carboniferous basins in the internal zone of the Variscides. Its evolution is closely related to movements along the Hunsrück Boundary Fault, which separates the Rhenohercynian and the Saxothuringian zones. Recent deep seismic surveys indicate that the Saar-Nahe-Basin formed in the hanging wall of a major detachment which soles out at lower crustal levels at about 16 km depth. Oblique extension along an inverted Variscan thrust resulted in the formation of a half-graben, within more than 8 km of entirely continental strata accumulated. The structural style within the basin is characterized by normal faults parallel to the basin axis and orthogonal transfer fault zones. Balanced cross-section construction and subsidence analysis indicate extension of the orogenically thickened lithosphere by 35%. Subsidence modeling shows discontinuous depth-dependent extension with laterally varying extension factors for crust and mantle lithosphere. Thus, the offset between maximum rift and thermal subsidence can be explained by a zone of mantle extension shifted laterally with respect to the zone of maximum crustal extension.

     

Stress and strain during fault-controlled lithospheric extension—insights from numerical experiments

Two-dimensional finite element techniques are used to study the temporal evolution and spatial distribution of stress and strain during lithospheric extension. The thermomechanical model includes a pre-existing fault in the upper crust to account for the reactivation of older tectonic elements. The fault is described using contact elements which allow for independent meshing of hanging wall and foot wall as well as simulation of large differential displacements between the fault blocks. Numerical models are run for three different initial temperature distributions representing extension of weak, moderately strong and strong lithosphere and three different extension velocities. In spite of the simple geodynamic boundary conditions selected, i.e., wholesale extension at a constant rate, stress and strain vary substantially throughout the lithosphere. In particular, in case of the weak lithosphere model, lower crustal flow towards the locus of maximum upper crustal extension results in the formation of a lower crustal dome while maintaining a subhorizontal Moho relief. The core of the dome experiences hardly any internal deformation, although it is the part of the lower crust which is exhumed the most. Stress fields in the lower crustal dome vary significantly from the regional trend underlining mechanical decoupling of the lower crust from the rest of the lithosphere. These differences diminish if cooler temperatures and, hence, stronger rheologies are considered. Lithospheric strength also exerts a profound control on the basin architecture and the surface expressions of extension, i.e., rift flank uplift and basin subsidence. If the lower crust is sufficiently weak, its flow towards the region of extended upper crust can provide a threshold value for the maximum subsidence which can be achieved during the syn-rift stage. In spite of continuous regional extension, corresponding burial history plots show exponentially decreasing subsidence rates which would traditionally be interpreted in terms of lithospheric cooling during the post-rift stage. The models provide templates to genetically link the surface and sub-surface expressions of lithospheric extension, for which usually no contemporaneous observations are possible. In particular, they help to decipher the information on the physical state of the lithosphere at the time of extension which is stored in the architecture and subsidence record of sedimentary basins.     

A Doubly Weighted Approach to Urban Data Disaggregation in GIS: A Case Study of Wuhan, China

Urban models are evolving to require more and more detailed data that in many cases have to be spatially disaggregated from larger zones. This paper deals with the disaggregation of statistical data in an urban context in which land use data are available at a less detailed level. With the availability of land use data, the traditional approach of areal weighting is improved with an areal and land use weighted approach. This weighted approach is further elaborated to include homogeneous weight zones (HWZ) so as to reflect general geographical variations among the same land use type. A case study in Wuhan, China has demonstrated the effectiveness of the doubly weighted approach within the specified context.     

Uranium/thorium dating of ferricretes from mid- to late pleistocene glacial sediments,western Tasmania,Australia

The uranium/thorium (U/Th) dating method was applied to pedogenic/diagenic ferricretes developed within glacial drifts from the northern West Coast Ranges of Tasmania. The dates derived from the method are, by definition, minima for the sediments, with the ferricretes being secondary mineral deposits which appear in the form of bands, horizons or nodules comprised of indurated masses of iron oxy(hydr)oxides developed post-depositionally within the host sediment or soil. The absence of such deposits in well-identified drift sediments of the last glaciation suggests the development of ferricrete horizons in glacial drifts occurred during earlier interstadials and interglacials. This has been confirmed by the uranium/thorium dating of ferricrete bands within glacigenic sediments obtained from three drill cores from the Boco Valley. The ages derived were found to be consistent with estimates for the timing of glaciation derived from palaeomagnetic analyses, radiocarbon dating and relative dating techniques. The results show that the uranium/thorium method can be used to successfully date ferricretes obtained from within glacial sediments of ages <350000 yr and provides valuable information regarding the minimum age of the host sediment. © 1997 John Wiley & Sons, Ltd.