Potential of legacy 2D seismic data for deep targeting and structural imaging at the Neves–Corvo massive sulphide-bearing deposit,Portugal

Seismic methods are becoming an established choice for deep mineral exploration after being extensively tested and employed for the past two decades. To investigate whether the early European mineral-exploration datasets had potential for seismic imaging that was overlooked, we recovered a low-fold legacy seismic dataset from the Neves–Corvo mine site in the Iberian Pyrite Belt in southern Portugal. This dataset comprises six 4–6 km long profiles acquired in 1996 for deep targeting. Using today's industry-scale processing algorithms, the world-class, ca. 150 Mt, Lombador massive sulphide and other smaller deposits were better imaged. Additionally, we also reveal a number of shallow but steeply dipping reflections that were absent in the original processing results. This study highlights that legacy seismic data are valuable and should be revisited regularly to take advantage of new processing algorithms and the experiences gained from processing such data in hard-rock environments elsewhere. Remembering that an initial processing job in hard rock should always aim to first obtain an overall image of the subsurface and make reflections visible, and then subsequent goals of the workflow could be set to, for example understanding relative amplitude ratios. The imaging of the known mineralization implies that this survey could likely have been among one of the pioneer studies in the world that demonstrated the capability of directly imaging massive sulphide deposits using the seismic method.     

Effects of the improper modeling of viscous damping on the first-mode and higher-mode dominated responses of base-isolated buildings

In many finite element platforms, a classical global damping matrix based on the elastic stiffness of the system (including isolators) is usually developed as part of the solution to the equations of motion of base-isolated buildings. The conducted analytical and numerical investigations illustrate that this approach can lead to the introduction of unintended damping to the first and higher vibration modes and the spurious suppression of the respective structural responses. A similar shortcoming might be observed even when a nonclassical damping model (ie, an assembly of the superstructure and isolation system damping sub-matrices) is used. For example, the use of Rayleigh damping approach to develop the superstructure damping sub-matrix can lead to the undesired addition of damping to the isolated mode arising from the mass-proportional component of the superstructure damping. On the other hand, the improper use of nonclassical stiffness-proportional damping (eg, determining the proportional damping coefficient, β_k , based on the first mode) can result in assigning significant damping to the higher-modes and the unintended mitigation of the higher-mode responses. Results show that a nonclassical stiffness-proportional model in which β_k is determined based on the second modal period of a base-isolated building can reasonably specify the intended damping to the higher modes without imparting undesirable damping to the first mode. The nonclassical stiffness-proportional damping can be introduced to the numerical model through explicit viscous damper elements attached between adjacent floors. In structural analysis software such as SAP2000®, the desired nonclassical damping can be also modeled through specifying damping solely to the superstructure material.     

A New Appraisal of Sri Lankan BB Zircon as a Reference Material for LA‐ICP‐MS U‐Pb Geochronology and Lu‐Hf Isotope Tracing

A potential zircon reference material (BB zircon) for laser ablation‐inductively coupled plasma‐mass spectrometry (LA‐ICP‐MS) U‐Pb geochronology and Hf isotope geochemistry is described. A batch of twenty zircon megacrysts (0.5–1.5 cm³) from Sri Lanka was studied. Within‐grain rare earth element (REE) compositions are largely homogeneous, albeit with some variation seen between fractured and homogeneous domains. Excluding fractured cathodoluminescence bright domains, the variation in U content for all analysed crystals ranged from 227 to 368 μg g^?1 and the average Th/U ratios were between 0.20 and 0.47. The Hf isotope composition (0.56–0.84 g/100 g Hf) is homogeneous within and between the grains – mean ¹⁷⁶Hf/¹⁷⁷Hf of 0.281674 ± 0.000018 (2s). The calculated alpha dose of 0.59 × 10¹⁸ g^?1 for a number of BB grains falls within the trend of previously studied, untreated zircon samples from Sri Lanka. Aliquots of the same crystal (analysed by ID‐TIMS in four different laboratories) gave consistent U‐Pb ages with excellent measurement reproducibility (0.1–0.4% RSD). Interlaboratory assessment (by LA‐ICP‐MS) from individual crystals returned results that are within uncertainty equivalent to the TIMS ages. Finally, we report on within‐ and between‐grain homogeneity of the oxygen isotope systematic of four BB crystals (13.16‰ VSMOW).     

Methods for estimating the velocities of the Brazil Current in the pre-salt reservoir area off southeast Brazil (23∘ S–26∘ S)

The Brazil Current (BC) is likely the least observed and investigated subtropical western boundary current in the world. This study proposes a simple and systematic methodology to estimate quasi-synoptic cross-sectional speeds of the BC within the Santos Basin (23^° S–26^° S) based on the dynamic method using several combinations of data: Conductivity, temperature, and depth (CTD), temperature profiles, CTD and vessel-mounted Acoustic Doppler Current Profiler (VMADCP), and temperature profiles and VMADCP. All of the geostrophic estimates agree well with lowered Acoustic Doppler Current Profiler (LADCP) velocity observations and yield volume transports of -5.56 ±1.31 and 2.50 ±1.01 Sv for the BC and the Intermediate Western Boundary Current (IWBC), respectively. The LADCP data revealed that the BC flows southwestward and is ～100 km wide, 500 m deep, and has a volume transport of approximately -5.75 ±1.53 Sv and a maximum speed of 0.59 m s^?1. Underneath the BC, the IWBC flows northeastward and has a vertical extent of approximately 1,300 m, a width of ～60 km, a maximum velocity of ～0.22 m s?¹, and a volume transport of 4.11 ± 2.01 Sv. Our analysis indicates that in the absence of the observed velocities, the isopycnal (σ ₀) of 26.82 kg m^?3 (～500 dbar) is an adequate level of no motion for use in geostrophic calculations. Additionally, a simple linear relationship between the temperature and the specific volume anomaly can be used for a reliable first estimate of the BC-IWBC system in temperature-only transects.     

Space- and ground-based measurements of sulphur dioxide emissions from Turrialba Volcano (Costa Rica)

Remotely sensed measurements of sulphur dioxide (SO₂) emitted by Turrialba Volcano (Costa Rica) are reported for the period September 2009–January 2011. These measurements were obtained using images from Advanced Spaceborne Thermal Emission and Reflexion radiometer, Ozone Monitoring Instrument and a ground-based UV camera. These three very different instruments provide flux measurements in good agreement with each other, which demonstrate that they can be integrated for monitoring SO₂ fluxes. Fluxes from Turrialba increased fourfold in January 2010, following a phreatic explosion that formed a degassing vent in the W crater of Turrialba. Since then, the SO₂ flux has remained high (30–50?kg/s) but seems to be showing a slowly decreasing trend. We interpret this evolution as the start of open vent degassing from a recently intruded magma body. The opening of the degassing vent decreased the confining pressure of the magma body and allowed the gases to bypass the hydrothermal system.     

Sediments Quality Assessment of Jacarepaguá Lagoon: The Venue of the 2011 Rock in Rio

In order to aid in the efforts of the 2016 Olympic Games, the organizers of 2011 Rock in Rio decided to build a permanent venue next to the Olympic Park. The area is problematic from the geotechnical point of view since it presents soils with low shear strength, low permeability, and high plasticity, so major soil improvement works were carried out. Bored soil–cement columns were placed to increase soil shear strength and reduce compressibility. A meter thick fill composed of gneiss residual soil was placed and trenches were digged to drain rainwater. However, earlier studies conducted on Jacarepaguá Lagoon have detected the presence of heavy metals in these sediments. In this study, an environmental survey on the Jacarepaguá Lagoon sediments took place in order to choose a place where its sediments could be dredged to be later used in the drainage facilities. The results indicated areas where the threshold level 1 (low probability of adverse effects) issued by the general procedures for sediments quality assessments for dredging purposes, Resolution no 344 of the Brazilian Federal Government, was surpassed. Levels above the limits established for cadmium (Cd), lead (Pb), copper (Cu), nickel (Ni), and zinc (Zn) were detected. Based on this consideration the State Environmental Agency issued a permit allowing the organizers of 2011 Rock in Rio to dredge an area close to City of Rock in order to obtain coarse sediments for the drainage facilities. In addition, it was found that those sediments were ideal for this application since their hydraulic conductivity is on the order of 10^?2 cm/s.     

Effects of sampling effort on the estimation of spatial gradients in a tropical reservoir impacted by an oil refinery

We investigated the effects of increase in sampling effort (30-1043 sampling points) on the accuracy of assessment of the spatial patterns of surface-water quality in a eutrophic tropical reservoir. The investigation was carried out during the dry season, when previous investigations showed that the spatial heterogeneity is more stable. A multi-parameter Yellow Springs Instruments probe coupled to a TechGeo D-GPS was used. This system is equipped to measure and store in a continuous recording mode, several physical and chemical parameters linked to geographical coordinates obtained with a precision of less than 1 m. We used different geostatistical approaches to determine the optimal number of sampling points required to reflect the real spatial patterns of water quality in the system. This approach was tested in a small tropical reservoir (Ibirité) that receives effluents from an oil refinery (the state-owned REGAP oil refinery, PETROBRAS) located near the city of Belo Horizonte. The study showed not only that the spatial patterns of water quality are significantly affected by sampling effort but also it was demonstrated that the establishment of an adequate sampling program is a critical point for the precise identification of source points of pollution. The results of this investigation enabled us to demonstrate the potential uses and limits of this method for rapid assessment of the water quality of lakes and reservoirs that receive external inputs of water contaminants or nutrients.