Searching for superhump period of cataclysmic variable AY Psc

The results obtained from unfiltered photometric CCD observations of AY Psc made during 17, 20 and 12 nights, respectively, in 2003, 2004 and 2005 are presented. A period of 0.21732 ± 0.00001 d was detected in the data. This period is consistent with the previously proposed orbital period of P_orb = 0.2173209 d ((Diaz and Steiner, 1990)). Since this period was present in the light curves taken in all three years, with no apparent change in its value or amplitude, it is interpreted as the orbital period of this binary system. In addition, quasi-periodicities of 0.2057 ± 0.0001 d, 0.2063 ± 0.0001 d, 0.2072 ± 0.0001 d for the years 2003, 2004 and 2005, respectively, were also discovered. These periods were interpreted as negative superhump periods and it was seen that they changes from year to year. Therefore AY Psc is then classified as a negative superhump system.     

Petrology of the Tekirova (Antalya) ophiolite (Southern Turkey): evidence for diverse magma generations and their tectonic implications during Neotethyan-subduction

The SW Antalya Complex is an assemblage of Mesozoic carbonate platform, margin and ophiolitic rocks which record the formation and tectonic emplacement of a small Mesozoic ocean basin. The late Cretaceous ophiolitic rocks are located at two localities, namely the relatively intact Tekirova ophiolite to the east of Kemer zone and the dismembered Gödene ophiolite to the west of Kemer zone. The Tekirova (Antalya) ophiolite comprises harzburgitic tectonites, ultramafic to mafic cumulates, isotropic gabbros and sheeted dikes. Numerous isolated dikes, ranging in thickness from 5 cm to 10 m, intruded the crustal rocks at different structural levels. The isotropic gabbros are represented by gabbro, diorite and quartz diorite rocks with granular to ophitic–subophitic textures. The isolated dikes are characterized by dolerite, diabase and microdiorite with ophitic, intersertal and microgranular textures. These rocks exhibit tholeiitic to alkaline compositions. New geochemical data presented in this paper from the isolated dikes and isotropic gabbros suggest that there are three main types of parental basic magmas that form the oceanic crustal rocks of the Tekirova (Antalya) ophiolite. These are (1) IAT series which can be referred to the Group I isolated dikes and isotropic gabbros; (2) low-Ti boninitic series characterized by the Group II isolated dike and isotropic gabbros; and (3) OIB-type including the Group III isotropic gabbros. The geochemical evidence suggests that the crustal rocks of the Tekirova (Antalya) ophiolite were generated from a progressive source depletion from island arc tholeiites (IAT) to boninites. Therefore, a fore-arc tectonic setting seems likely for the generation of the crustal rocks from the Tekirova (Antalya) ophiolite in the southern branch of Neotethys during the Late Cretaceous. The OIB-type alkaline isotropic gabbros are thought to have resulted from either (1) a late-stage magmatic activity fed by melts that originated within an asthenospheric window due to slab break-off or (2) subduction of a ridge system which generated OIB source across the asthenospheric window that has been no influence of fluids from the subducted slab into the overlying mantle wedge, shortly before the emplacement of the Tekirova (Antalya) ophiolite onto the Tauride platform.     

A combined polarizing microscope,XRD, SEM,and specific gravity study of the petrified woods of volcanic origin from the Çamlıdere-Çeltikçi-Güdül fossil forest,in Ankara,Turkey

The fossil forest in the Çaml?dere-Çeltikçi-Güdül region of the province of Ankara in Turkey has a large number of petrified coniferous and oak tree remains. Petrification occurred in volcanic ashes and tuffs with permineralization, and Fe, Mg, Ca and Ni ions played important roles in the substitution of Si for C. However, the petrified wood samples are heterogeneous in colouration, weight, toughness, and durability, despite being obtained from the same source. Those features are very important for end-users because petrified woods, if cut and polished, are used widely as both decorative indoor tiles and gemstone objects, but heterogeneous materials suffer large wastage while they are being worked and used.Chemical analyses, specific gravity measurements, polarizing microscope studies, X-ray diffraction patterns, and scanning electron image evaluations were performed to classify and identify the homogenous material of the petrified woods relating to its physical and mineralogical characteristics.The different characteristics of the petrified wood samples are due to their varying inner structures, which depend on the replacement silica-building phases and their ratios, and silica particle sizes. Thin sections and XRD patterns revealed that petrified woods in the region were silicified by replacement with both chalcedonic quartz components, including chalcedony (length-fast quartz), moganite and orthorhombic-silica (length-slow quartz), and opalline quartz components including opal-CT and opal-C (length-slow quartz). The scanning electron microscope images were shown that the internal structures of the petrified woods consist of mostly submicron-sized (100–800 nm), and partially nano-sized (60–120 nm) silica-building particles.So, the petrified wood samples can be firstly classified into five main-groups based on their colourations and specific gravity values, then, into three sub-groups based on the principal chalcedonic and opalline quartz silica-building phases and related particle sizes, and also weighing, toughness, and durability. In the first group (samples 1, 2, and 3), the crystallinity gradation of the petrified woods can be classified as quasi-coarse crystalline because they include mainly chalcedony and moganite phases with 800–200 nm ranging in particle size. They are heavy, tough, and resistance as a material, as shown by specific gravity values of 2.60, 2.56, and 2.54, respectively. In the second group (sample 4), the crystallinity gradation of the petrified wood can be classified as quasi-fine crystalline because it includes mainly o-silica and moganite phases with 400–100 nm ranging in particle size. It is medium-heavy, semi-tough and quasi-resistance as a material, as shown by a specific gravity value of 2.42. In the third group (sample 5), the crystallinity gradation of the petrified wood can be classified as quasi-nano-crystalline because it includes mainly opal-CT and opal-C phases with 120–60 nm ranging in particle size. The material is slight, brittle, and weak as a material, as shown by a specific gravity value of 2.18.Ultimately, in the petrified wood found in the Çaml?dere-Çeltikçi-Güdül region of Ankara province in Turkey, it is revealed that samples 1, 2, and 3 represent flint and chalcedony quartz mineral species, samples 4 and 5 represent chalcedony and opal quartz mineral species.     

Development of a GIS-based monitoring and management system for underground coal mining safety

Coal mine safety is of paramount concern to mining industry. Mine accidents have various causes and consequences including catastrophic failure of mine, substantial economic losses and most notably loss of lives. Therefore, any initiative in mine monitoring is of vital importance for progressing safety surveillance and maintenance.This paper presents the development of a geographic information system (GIS)-based monitoring and management system for underground mine safety in three levels as constructive safety, surveillance and maintenance, and emergency. The developed model integrates the database design and management to the monitoring system implementation which encompasses query and analysis operations with the help of web and desktop applications. Interactive object-oriented graphical user interfaces (GUIs) were developed to visualize information about the entities gathered from the model and also to provide analysis operations based on the graphical representations and demonstrations using data tables and map objects.The research methodology essentially encompasses five main stages: (i) designing a conceptual database model; (ii) development of a logical model in terms of entity-relationship (ER) diagrams; (iii) development of a physical model based on physical constraints and requirements; (iv) development of GUIs and implementation of the developed model, analysis and queries; (v) verification and validation of the created model for Ömerler underground coal mine in Turkey. The proposed system is expected to be an efficient tool for improving and maintaining healthy standards in underground coal mines which can possibly be extended to a national GIS infrastructure.     

Effects of land-based sources on water quality in the Omerli reservoir (Istanbul,Turkey)

The Omerli reservoir is located on the northeastern side of the Istanbul City. It is one of the most important sources of drinking water with a surface area of 23.1 km² and a volume of 220 × 10⁶ m³ in the Marmara Region. Water quality characteristics of the lake investigated from May 2002 to April 2003 enabled us to identify the effect of waste loads on water quality of Omerli Lake. The following parameters were measured in the lake water: temperature (16.1°C), conductivity (250 μS/cm), secchi disk depth (1.9 m), dissolved oxygen (DO) (9.36 mg/L), nutrients [ortho-phosphate (78.9 μg/L), nitrate + nitrite (707.5 μg/L) and ammonia-nitrogen (264 μg/L)], chlorophyll a (9.43 μg/L), total organic carbon (3.33 mg/L), total suspended solids (4.54 mg/L), total poly aromatic hydrocarbon (t-PAH) (0.69 μg/L) and copper (24.5 μg/L). T-PAH (16.5 mg/g-dry-w), Cu (96.5 μg/g-dry-w), organic carbon (org-C) (2.0%) and N (0.44%) were determined in the surface sediment. The values of chlorophyll a and DO in the upper layer were relatively high and low secchi disk depths indicates eutrophic state. There are five channels discharging water, including waste water, into the lake. All channels were sampled during six occasions in order to cover variations between seasons. The following parameters were measured: total organic carbon, total phosphorus, total kjeldahl nitrogen, ammonia and total suspended solids with the flow rates. The Göçbeyli stream has the highest flow into the lake (1.5 × 10⁸ m³/year) but most of the nutrients were discharged from the Pa?aköy channel. It is accounting for 81% of ammonia and 80% of total phosphorus into the lake. Three scenarios were run using AQUATOX model: (1) all existing inflows are discharging into the lake (present situation); (2) none is discharging; (3) all are discharging except the Pa?aköy channel. The first scenario produced concentrations consistent with measurements in the lake. In all stations, a phytoplankton peak value was predicted during November and December 2002, and January 2003. In the second scenario, as expected, a significant decrease in the concentrations was predicted. In the third scenario, a small improvement in the water quality was obtained. To significantly improve the state of the lake, instead of entering Pa?aköy channel, wastewater should bypass the lake.     

Delineation of shallow resistivity structure in the city of Burdur,SW Turkey by vertical electrical sounding measurements

The city of Burdur, which is built on an alluvium aquifer, is located in one of the most seismically active zones in southwestern Turkey. The soil properties in the study site are characterized by unconsolidated and water-saturated sediments including silty, clayey and sandy units, and shallow groundwater level is the other characteristic of the site. Thus, the city is under soil liquefaction risk during a large earthquake. A resistivity survey including 189 vertical electrical sounding (VES) measurements was carried out in 2000 as part of a multi-disciplinary project aiming to investigate settlement properties in Burdur city and its vicinity. In the present study, the VES data acquired by using a Schlumberger array were re-processed with 1D and 2D inversion techniques to determine liquefaction potential in the study site. The results of some 1D interpretations were compared to the data from several wells drilled during the project. Also, the groundwater level map that was previously obtained by hydrological studies was extended toward north by using the resistivity data. 2D least-squares inversions were performed along nine VES profiles. This provided very useful information on vertical and horizontal extends of geologic units and water content in the subsurface. The study area is characterized by low resistivity distribution (<150 Ωm) originating from high fluid content in the subsurface. Lower resistivity (3–30 Ωm) is associated with the Quaternary and the Tertiary lacustrine sediments while relatively high resistivity (40–150 Ωm) is related to the Quaternary alluvial cone deposits. This study has also shown that the resistivity measurements are useful in the estimation of liquefaction risk in a site by providing information on the groundwater level and the fluid content in the subsurface. Based on this, we obtained a liquefaction hazard map for the study area. The liquefaction potential was classified by considering the resistivity distributions from 2D inversion of the VES profiles, the types of the sediments and the extended groundwater level map. According to this map, the study area was characterized by high liquefaction hazard risk.     

Landscape planning and management strategies for the Zir Valley,near Ankara,Turkey

This paper proposes a landscape planning and management method for river basins within the context of the European Landscape Convention (ELC) and European Water Framework Directive (WFD). This method has been applied to the Zir Valley in Ankara, Turkey. Landscape planning is identified by the ELC (European Treaty Series No. 176, 2000) as an important, forward-looking action to enhance, restore or create landscapes. The ELC also states that landscape management should promote sustainable development to ensure the non-degradation of landscapes and to help harmonize inevitable changes. The WFD (Directive 2000/60/EC of the European Parliament and of the Council, 2000) is a set of guidelines for managing large bodies of water. Its principle directive is to identify water bodies and the adjacent land areas that influence, and are influenced by, those water bodies. These are called River Basin Districts, and act as essential physiographic landscape units. While several regulations related to environmental planning, and used on a national as well as European basis, tend to utilize the same tools in practice, there are dissimilarities in how they are specifically applied and little effort is being made to promote a cooperative approach. In this paper, a National Approach for River Basin Management is proposed. This approach, which includes a landscape planning and management method based on landscape form and function, was developed to address the common purposes of the ELC and WFD.     

Modelling Last Glacial Maximum ice cap with the Parallel Ice Sheet Model to infer palaeoclimate in south-west Turkey

Modelling palaeoglaciers in mountainous terrain is challenging due to the need for detailed ice flow computations in relatively narrow and steep valleys, high-resolution climate estimations, knowledge of pre-ice topography, and proxy-based palaeoclimate forcing. The Parallel Ice Sheet Model (PISM), a numerical model that approximates glacier sliding and deformation to simulate large ice sheets such as Greenland and Antarctica, was recently adapted to alpine environments. In an attempt to reconstruct the climate conditions during the Last Glacial Maximum (LGM) on Mount Dedegöl in SW Turkey, we used PISM and explored palaeoglacier dynamics at high spatial resolution (100 m) in a relatively small domain (225 km²). Palaeoice-flow fields were modelled as a function of present temperature and precipitation. Nine different palaeoclimate simulations were run to reach the steady-state glacier extents and the modelled glacial areas were compared with the field-based and chronologically well-established ice extents. Although our results provide a non-unique solution, best-fit scenarios indicate that the LGM climate on Mount Dedegöl was between 9.2 and 10.6 °C colder than today, while precipitation levels were the same as today. More humid (20% wetter) or arid (20% drier) conditions than today bring the palaeotemperature estimates to 7.7–8.8 or 11.5–13.2 °C lower than present, respectively.