Cretaceous Environments of Afghanistan:A Synthesis Based on Selected Sections

1IntroductionThe Late Mesozoic sequences of Afghanistan are important in understanding the geodynamic evolu-tion of the northwestern part of South Asia, in par-ticular the transgressive and regressive history of the northwestern part of the Tethys connecting Iran to the west and the northern Indian Subcontinent to the east. Jurassic to Upper Cretaceous sedimentary seque-nces were initially studied by Griesbach (1885 ~1887) and Hayden (1880~1901) through several traverses in northern an…     

Impact of rangeland enclosure and seasonal grazing on protected and unprotected rangelands in Chakwal region,Pakistan

Scrub rangelands support livestock grazing and provide ecosystem services to their inhabitants.The present study was conducted in Chakwal,an important tract of ...     

National ocean policy—new opportunities for Malaysian ocean development

Being a littoral state, Malaysian maritime sectors provide the basis for the growth and development of marine-related activities. As the country enters the new millennium along with the ‘2020 Vision’ which serves as the basic template against which the economic performance of these sectors should be judged, it poses a new challenge for Malaysia in developing these sectors. This paper attempts to address three basic issues: Firstly, is there any national ocean policy in place? Secondly, are the maritime sectors adequately organized to play an important role in achieving the objectives? Thirdly, what are the opportunities available in developing the ocean?It can be seen that existing policies to develop comprehensive ocean governance have not received the full attention they deserve. Organizational structures governing the ocean for implementing national policies are well in place but in a fragmented and uncoordinated fashion. As a result, sectoral and intersectoral management problems were created such as multiple-use conflicts, overlapping of jurisdiction and duplication of efforts. Environmental problems have also not been properly addressed. A few sectors have been identified as offering opportunities to further develop the Malaysian maritime areas. Among these are marine education and human resources development, marine tourism and the seafood industry.     

The influence of physical and biological processes on the ichthyoplankton communities in the Gulf of Sirte (Southern Mediterranean Sea)

This paper reports on the first study on the ichthyoplankton community structure in the Gulf of Sirte and its spatial distribution in relation to environmental conditions and zooplankton abundance. The results make an important contribution to the future management of fisheries in this unexplored, but much exploited, area. Biological samples were collected in July 2008 using a Bongo40 net. In total, 1914 larvae were found and 1652 of these were identified. In particular, bathypelagic taxa were the most abundant, followed by demersal, mesopelagic, pelagic and epipelagic taxa. The ichthyoplankton community had a patchwork distribution influenced by oligotrophic conditions, the bottom depth and oceanographical features. The results suggest that environmental forcings were able to transport the ichthyoplankton to productive areas. Indeed, maximum fish egg densities were found in coastal stations in correspondence with the Atlantic Tunisian Current inflow, whereas larvae were mainly concentrated in the east side of the Gulf, probably as a result of advection by the anticyclonic circulation. Additionally, the distribution patterns of the total larvae density and the different assemblages were well matched with the abundance of the zooplankton, probably determining final larval survival, growth and recruitment.     

CFD simulation and experimental analysis of flow dynamics and grinding performance of opposed fluidized bed air jet mill

This paper presents a three dimensional Computational Fluid Dynamics (CFD) model to investigate the flow dynamics of solid–gas phases during fine grinding in an air jet mill. Alpine 100AFG fluidized bed air jet mill is considered for the study and the jet milling model is simulated using FLUENT 6.3.2 using a standard k-ε model. The model is developed in GAMBIT 2.3.16 and meshed by tet/hybrid (T-Grid) and Triangular (Pave) meshes. The effects of operating parameters such as solid feed rate, grinding air pressure and internal classifier speed on the performance of the jet mill are analyzed. The CFD simulation results are presented in the forms of dual phase vector plot, volume fraction of phases and particle trajectories during fine grinding process. The mass of ground feed entering and leaving the cyclone (underflow) is also computed by simulation. The proposed model gives realistic predictions of the flow dynamics within the jet mill. Experiments are conducted on the Alpine 100AFG jet mill to study the particle size, morphology and mass of the ground product. The numerical results are found in good agreement with the experimental results.     

A quantitative study of the energy release in the aftershocks of the Bhuj earthquake, 2001, India, using Lg phase

The devastating earthquake on 26 January 2001 at Bhuj, India, resulted in large-scale death and destruction of properties of several million US dollars. The moment magnitude of the earthquake was 7.7 and its maximum focal intensity exceeded X in MM scale. The rate of aftershocks of this earthquake, recorded at Gauribidanur seismic array station (GBA), shows a monotonic decay with time superposed with oscillations. For the Indian continent the Lg phase is a prominent arrival at regional distances. The estimate of Lg amplitude is obtained by optimally fitting the Lg wave train to a exponential decay curve. The logarithm of these amplitudes and logarithm of root mean square (rms) value of actual amplitudes of the Lg are calibrated with USGS m_b to create a local m_bLg magnitude scale. The energy released from these aftershocks is calculated from the rms value of Lg phase. The plot of cumulative energy release with time follows the power law of the form t^p, superposed with oscillations. The exponent of the power law, p, is estimated both by a time-window scanning method and by an interpolation method. The value of p is 0.434 for time-window scanning method and 0.432 for the interpolation method. The predominant periods found in the oscillatory part of the cumulative energy, obtained by differencing the observed from the power law fit, are 10.6, 7.9, 5.4, 4.6 and 3.5 h for time-window scanning method. The corresponding periods for interpolation method are 13.4, 11.5, 7.4, 4.2, 3.5, 2.6 and 2.4 h.     

Coupled ‘storm‐flood’ depositional model: Application to the Miocene–Modern Baram Delta Province,north‐west Borneo

The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (10² to 10⁵ km²) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma⁻¹), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.     

Assessment of Trace Metal Contamination of Drinking Water in the Pearl Valley,Azad Jammu and Kashmir

The aim of this study was to assess trace metal contamination of drinking water in the Pearl Valley, Azad Jammu and Kashmir (Pakistan). The objectives were to determine physical properties and the dissolved concentration of five trace metals, i. e., lead, copper, nickel, zinc, and manganese, in drinking water samples collected from various sites of municipal water supply, natural water springs and wells in the valley. Concentrations of the metals in the water samples were determined by flame atomic absorption spectrometry. Results showed physical parameters, i. e., appearance, taste and odor within acceptable limits and pH was between 5.5 and 7.0. The observed concentrations of the metals varied between sources of water samples and between sampling sites. Maximum dissolved concentration observed was 4.7 mg/L for Pb and Mn, 4.6 mg/L for Zn, 2.9 mg/L for Ni and 2.8 mg/L for Cu. The observed concentrations of the metals were compared with the World Health Organization's guideline values for drinking water. Overall, the quality of water samples taken from the water springs at Mutyal Mara and Bonjosa was good; however, the water quality was unsuitable for drinking in Kiraki, Kharick, and Pothi Bala localities particularly. Finally, the authors discuss possible causes for increased concentrations of the trace metals in drinking water in the study area.     

An automated 3D modeling of topological indoor navigation network

Indoor navigation is important for various applications such as disaster management, building modeling, safety analysis etc. In the last decade, indoor environment has been a focus of wide research that includes development of indoor data acquisition techniques, 3D data modeling and indoor navigation. In this research, an automated method for 3D modeling of indoor navigation network has been presented. 3D indoor navigation modeling requires a valid 3D model that can be represented as a cell complex: a model without any gap or intersection such that two cells (e.g. room, corridor) perfectly touch each other. This research investigates an automated method for 3D modeling of indoor navigation network using a geometrical model of indoor building environment. In order to reduce time and cost of surveying process, Trimble LaserAce 1000 laser rangefinder was used to acquire indoor building data which led to the acquisition of an inaccurate geometry of building. The connection between surveying benchmarks was established using Delaunay triangulation. Dijkstra algorithm was used to find shortest path in between building floors. The modeling results were evaluated against an accurate geometry of indoor building environment which was acquired using highly-accurate Trimble M3 total station. This research intends to investigate and propose a novel method of topological navigation network modeling with a less accurate geometrical model to overcome the need of required an accurate geometrical model. To control the uncertainty of the calibration and of the reconstruction of the building from the measurements, interval analysis and homotopy continuation will be investigated in the near future.