Flux of nutrients and heavy metals from the Melai River sub-catchment into Lake Chini, Pekan, Pahang, Malaysia

This study was carried out to determine the flux of nutrients and heavy metals from the Melai sub-catchment into Lake Chini through the process of erosion. Melai River is one of the seven feeder rivers that contributed to the present water level of Lake Chini. Three properties of soils, such as particle size, organic matter content, and soil hydraulic conductivity and three chemical soil properties, such as available nutrients, dissolved nutrients, and heavy metals, were analyzed and interpreted. Potential soil loss was estimated using the revised universal soil loss equation model. The results show that the soil textures in the study area consist of clay, silty clay, clay loam, and sandy silt loam. The organic matter content ranges from 3.40 to 9.92 %, while the hydraulic conductivity ranges from 5.2 to 25.3 cm/h. Mean values of available P, K, and Mg amount was 8.5 ± 3.7 μg/g, 24.5 ± 3.4 μg/g, and 20.7 ± 18.6 μg/g, respectively. The highest concentration of soluble nutrients was SO ₄ ^?2 (815.8 ± 624.1 μg/g), followed by NO₃ ^?-N (295.5 ± 372.7 μg/g), NH₄ ⁺-N (24.5 ± 22.1 μg/g) and PO₄ ^3? (2.0 ± 0.8 μg/g). The rainfall erosivity value was 1658.7 MJ mm/ha/h/year. The soil erodibility and slope factor ranges from 0.06 to 0.26 ton h/MJ/mm and 7.63 to 18.33, respectively. The rate of soil loss from the Melai sub-catchment in the present condition is very low (0.0028 ton/ha/year) to low (18.93 ton/ha/year), and low level flow of nutrients and heavy metals, indicating that the Melai River was not the contaminant source of sediments, nutrients, and heavy metals to the lake.     

Assessment of seawater intrusion to the agricultural sustainability at the coastal area of Carey Island, Selangor, Malaysia

Groundwater suitability for agriculture in an island with limited recharge area may easily be influenced by seawater intrusion. The aim of this study was to investigate seawater intrusion to the suitability of the groundwater for oil palm cultivation at the ex-promontory land of Carey Island in Malaysia. This is the first study that used the integrated method of geo-electrical resistivity and hydro-geochemical methods to investigate seawater intrusion to the suitability of groundwater for oil palm cultivation at two different land cover condition. The relationship between earth resistivity, total dissolved solids and earth conductivity was derived with crop suitability classification according to salinity, used to identify water types and also oil palm tolerance to salinity. Results from the contour conductivity maps show that area facing severe coastal erosion and area still intact with mangrove forest exhibits unsuitable groundwater condition for oil palm at the unconfined aquifer thickness of 15 and 31 m, respectively. Based on local sea-level rise prediction and Ghyben–Herzberg assumption (sharp interface), the condition in the study area, especially in severe erosion area, by the twenty-first century will no longer be suitable for oil palm plantation. The application of geo-electrical method combined with geochemical data, aided with the information on environmental history and oil palm physiography, has demonstrated that the integration of techniques is an effective tool in defining the status of agricultural suitability affected by salinity at the coastal aquifer area.     

Landslide Mapping and Assessment by Integrating Landsat-8, PALSAR-2 and GIS Techniques: A Case Study from Kelantan State,Peninsular Malaysia

Integration of satellite remote sensing data and GIS techniques is an applicable approach for landslide mapping and assessment in highly vegetated regions with a tropical climate. In recent years, there have been many severe flooding and landslide events with significant damage to livestock, agricultural crop, homes, and businesses in the Kelantan river basin, Peninsular Malaysia. In this investigation, Landsat-8 and phased array type L-band synthetic aperture radar-2 (PALSAR-2) datasets and analytical hierarchy process (AHP) approach were used to map landslide in Kelantan river basin, Peninsular Malaysia. Landslides were determined by tracking changes in vegetation pixel data using Landsat-8 images that acquired before and after flooding. The PALSAR-2 data were used for comprehensive analysis of major geological structures and detailed characterizations of lineaments in the state of Kelantan. AHP approach was used for landslide susceptibility mapping. Several factors such as slope, aspect, soil, lithology, normalized difference vegetation index, land cover, distance to drainage, precipitation, distance to fault, and distance to the road were extracted from remotely sensed data and fieldwork to apply AHP approach. The excessive rainfall during the flood episode is a paramount factor for numerous landslide occurrences at various magnitudes, therefore, rainfall analysis was carried out based on daily precipitation before and during flood episode in the Kelantan state. The main triggering factors for landslides are mainly due to the extreme precipitation rate during the flooding period, apart from the favorable environmental factors such as removal of vegetation within slope areas, and also landscape development near slopes. Two main outputs of this study were landslide inventory occurrences map during 2014 flooding episode and landslide susceptibility map for entire Kelantan state. Modeled/predicted landslides with a susceptible map generated prior and post-flood episode, confirmed that intense rainfall throughout Kelantan has contributed to produce numerous landslides with various sizes. It is concluded that precipitation is the most influential factor for landslide event. According to the landslide susceptibility map, 65% of the river basin of Kelantan is found to be under the category of low landslide susceptibility zone, while 35% class in a high-altitude segment of the south and south-western part of the Kelantan state located within high susceptibility zone. Further actions and caution need to be remarked by the local related authority of the Kelantan state in very high susceptibility zone to avoid further wealth and people loss in the future. Geo-hazard mitigation programs must be conducted in the landslide recurrence regions for reducing natural catastrophes leading to loss of financial investments and death in the Kelantan river basin. This investigation indicates that integration of Landsat-8 and PALSAR-2 remotely sensed data and GIS techniques is an applicable tool for Landslide mapping and assessment in tropical environments.     

3-D reconstruction of coastal bathymetry from AIRSAR/POLSAR data

This paper introduces a new method for reconstructing three-dimensional (3D) coastal bathymetry changes from Airborne AIRSAR/POLSAR synthetic aperture data. The new method is based on integration between fuzzy B-spline and Volterra algorithm. Volterra algorithm is used to simulate the ocean surface current from AIRSAR/POLSAR data. Then, the ocean surface current information used as input for continuity equation to estimate the water depths from AIRSAR/POLSAR data. This study shows that 3D ocean bathymetry can be reconstructed from AIRSAR/POLSAR data with root mean square error of ±0.03 m.     

Evaluation of ICA and CEM algorithms with Landsat-8/ASTER data for geological mapping in inaccessible regions

Many regions remain poorly studied in terms of geological mapping and mineral exploration in inaccessible regions especially in the Arctic and Antarctica due to harsh conditions and logistic difficulties. Application of specialized image processing techniques is capable of revealing the hidden linear mixing spectra in multispectral and hyperspectral satellite images. In this study, the applications of Independent component analysis (ICA) and Constrained Energy Minimization (CEM) algorithms were evaluated for Landsat-8 and Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) remote sensing data for geological mapping in Morozumi Range and Helliwell Hills areas, Northern Victoria Land (NVL), Antarctica. The results of this investigation demonstrate the capability of the two algorithms in distinguishing pixel and subpixel targets in the multispectral satellite data. The application of the methods for identifying poorly exposed geologic materials and subpixel exposures of alteration minerals has invaluable implications for geological mapping and mineral exploration in inaccessible regions.     

A Preliminary Genetic Investigation of Rastrelliger Kanagurta Based on Random Amplified Polymorphic DNA and Mitochondrial ND2 Gene

In a preliminary investigation, Random Amplified Polymorphie DNA (RAPD) analysis and partial mitochon-drial ND2 gene sequencing were conducted to study the genetic variation of the Indian mackerel, Rastrelliger kanagurta along a 450 km stretch of its distribution on the west coast of Peninsular Malaysia. A total of 53 individuals from 6 popu-lations were analyzed using 4 RAPD primers and a sub-sample of 15 individuals was chosen for sequencing of partial ND2 gene. Comparison between the 2 markers revealed genetic structuring in the RAPD results but genetic homogeneity for ND2 gene. Based on the former there may be at least 2 genetically differentiated groups of Rastrelliger kanagurta a-long this stretch.     

Malachite Green Adsorption onto Chitosan Coated Bentonite Beads: Isotherms,Kinetics and Mechanism

The removal of Malachite green (MG) from aqueous solutions by cross‐linked chitosan coated bentonite (CCB) beads was investigated and the CCB beads were characterized by Fourier Transform Infrared (FTIR) spectroscopy, scanning electron microscopy (SEM) coupled with energy dispersive spectroscopy (EDS) and X‐ray diffraction (XRD) analysis. Solubility and swelling tests were performed in order to determine the stability of the CCB beads in acidic solution, basic solution and distilled water. The amount of MG adsorbed was shown to be influenced by the initial pH of the solution, contact time and the initial MG concentration. A kinetic study indicated that a pseudo‐second‐order model agreed well with the experimental data. From the Langmuir isotherm model, the maximum adsorption capacity of MG was found to be 435.0 mg g^–1. Desorption tests were carried out at different concentrations of EDTA, H₂SO₄ and NaOH. However, all desorbing solutions showed zero recovery of MG at all concentrations.