Delineation of potential seismic sources for seismic zoning of Iran

A total of 235 potential seismic sources in Iran and neighboring regions are delineated based on available geological, geophysical, tectonic and earthquake data for seismic hazard assessment of the country. In practice, two key assumptions are considered; first, the assumption of earthquake repeatedness, implying that major earthquakes occur preferentially near the sites of previous earthquakes; second, the assumption of tectonic analogy, which implies that structures of analogous tectonic setting are capable of generating same size earthquakes. A two-step procedure is applied for delineation of seismic sources: first, demarcation of seismotectonic provinces; second, determination of potential seismic sources. Preferentially, potential seismic sources are modeled as area sources, in which the configuration of each source zone is controlled, mainly, by the extent of active faults, the mechanism of earthquake faultings and the seismogenic part of the crust.     

Integrated magnetic and gravity surveys for geothermal exploration in Central Iran

The Delijan region of Central Iran is a popular tourist spot due to the occurrence of hot springs and having the greatest geothermal fields in Iran. In the years 2011 and 2012, an integrated geophysical investigation, using magnetic and gravity methods, was conducted over the hot springs in order to characterize geophysical anomaly sources corresponding to the geothermal resources. The results of the geophysical investigations revealed the heat source and the reservoir of the Delijan geothermal system (DGS). Based on results of Euler depth estimation and 3D inversion of magnetic and gravity data, the depths and extension of the discovered structures were determined with a good correlation with the geological information. The results of magnetic interpretation show that the main source (heat source) of the geothermal system is located NE of the Delijan-Abgarm fault (DAf) zone at depths of 2500 to 5000 m, and the results of gravity interpretation show that the reservoir of the geothermal system is located along the DAf zone at depths of 1000 to 4000 m. Also, the horizontal gradients of gravity data reveal complex fault systems which are acting as the preferential paths to circulate the hydrothermal fluids.     

Modeling the strong ground motion and rupture characteristics of the March 31, 2006, Darb-e-Astane earthquake,Iran, using a hybrid of near-field SH-wave and empirical Green’s function method

We analyze the strong motion accelerograms of the moderate (M _w = 6.1), March 31, 2006, Darb-e-Astane earthquake of western Iran and also those of one of its prominently recorded, large (M _w = 5.1) foreshock and (M _w = 4.9) aftershock. (1) Using derived SH-wave spectral data, we first objectively estimate the parameters W _o\mathit{\Omega} _{\rm o} (long period spectral level), f _c (corner frequency) and Q(f) (frequency dependent, average shear wave quality factor), appropriate for the best-fit Brune ω ^− 2 spectrum of each of these three events. We then perform a non-linear least square analysis of the SH-wave spectral data to provide approximate near-field estimates of the strike, dip, and rake of the causative faults and also the seismic moment, moment magnitude, source size, and average stress drop of these three events. (2) In the next step, we use these approximate values and an empirical Green’s function approach, in an iterative manner, to optimally model the strong ground motion and rupture characteristics of the main event in terms of peak ground acceleration/velocity/displacement and duration of ground shaking and thereby provide improved, more reliable estimates of the causative fault parameters of the main event and its asperities. Our near-field estimates for both the main moderate event and the two smaller events are in good conformity with the corresponding far-field estimates reported by other studies.     

Region-specific <Emphasis Type="Italic">S</Emphasis>-wave attenuation for earthquakes in northwestern Iran

In this study, continuous wavelet transform is applied to estimate the frequency-dependent quality factor of shear waves, Q _S , in northwestern Iran. The dataset used in this study includes velocigrams of more than 50 events with magnitudes between 4.0 and 6.5, which have occurred in the study area. The CWT-based method shows a high-resolution technique for the estimation of S-wave frequency-dependent attenuation. The quality factor values are determined in the form of a power law as Q _S (f)?=?(147?±?16)f ^0.71?±?0.02 and (126?±?12)f ^0.73?±?0.02 for vertical and horizontal components, respectively, where f is between 0.9 and 12 Hz. Furthermore, in order to verify the reliability of the suggested Q _S estimator method, an additional test is performed by using accelerograms of Ahar-Varzaghan dual earthquakes on August 11, 2012, of moment magnitudes 6.4 and 6.3 and their aftershocks. Results indicate that the estimated Q _S values from CWT-based method are not very sensitive to the numbers and types of waveforms used (velocity or acceleration).     

Monitoring thermal field,humidity field and energy balance over heterogeneous surfaces in the typical valley-city

Journal of Geographical Sciences - Land use and land cover (LULC) alteration has changed original energy balance and heat fluxes between land and atmosphere, and thus affects the structure...     

Wave climate simulation for southern region of the South China Sea

This study investigates long-term variability and wave characteristic trends in the southern region of the South China Sea (SCS). We implemented the state-of-the art WAVEWATCH III spectral wave model to simulate a 31-year wave hindcast. The simulation results were used to assess the inter-annual variability and long-term changes in the SCS wave climate for the period 1979 to 2009. The model was forced with Climate Forecast System Reanalysis winds and validated against altimeter data and limited available measurements from an Acoustic Wave and Current recorder located offshore of Terengganu, Malaysia. The mean annual significant wave height and peak wave period indicate the occurrence of higher wave heights and wave periods in the central SCS and lower in the Sunda shelf region. Consistent with wind patterns, the wave direction also shows southeasterly (northwesterly) waves during the summer (winter) monsoon. This detailed hindcast demonstrates strong inter-annual variability of wave heights, especially during the winter months in the SCS. Significant wave height correlated negatively with Niño3.4 index during winter, spring and autumn seasons but became positive in the summer monsoon. Such correlations correspond well with surface wind anomalies over the SCS during El Nino events. During El Niño Modoki, the summer time positive correlation extends northeastwards to cover the entire domain. Although significant positive trends were found at 95 % confidence levels during May, July and September, there is significant negative trend in December covering the Sunda shelf region. However, the trend appears to be largely influenced by large El Niño signals.     

Non-Poisson probabilistic seismic hazard assessment

The development of the new seismic hazard map of metropolitan Tehran is based on probabilistic seismic hazard computation using the non-Poisson recurrence time model. For this model, two maps have been prepared to indicate the earthquake hazard of the region in the form of iso-acceleration contour lines. They display the non-Poisson probabilistic estimates of peak ground accelerations over bedrock for 10 and 63 % probability of exceedance in 50 years. To carry out the non-Poisson seismic hazard analysis, appropriate distributions of interoccurrence times of earthquakes were used for the seismotectonic provinces which the study region is located and then the renewal process was applied. In order to calculate the seismic hazard for different return periods in the probabilistic procedure, the study area encompassed by the 49.5–54.5°E longitudes and 34–37°N latitudes was divided into 0.1° intervals generating 1,350 grid points. PGA values for this region are estimated to be 0.30–0.32 and 0.16–0.17 g for 10 and 63 % probability of exceedance, respectively, in 50 years for bedrock condition.     

Interaction between tachyon dark energy and modified Chaplygin gas

In the present work we assume that the universe is dominated with a two component mixture which do not evolve separately but interact non-gravitationally with one another. we consider the issue of the tachyon as a source of the dark energy and modified Chaplygin gas as background fluid. So we study the interacting between tachyon field and modified Chaplygin gas in different forms of interactions term Q in both flat and non-flat FRW universe. Then we reconstruct the potential and the dynamics of the tachyon field which describe tachyon cosmology. Also we find a equivalence potential for MCG in this model. Next we study two dark components respect to redshift and we find the conditions that are required for the stability of this model.     

Contamination and ecological risk assessment of heavy metals in street dust of Tehran,Iran

Heavy metals are introduced in human tissue through breathing air, food chain and human skin. They can cause damage to the nervous system and internal organs. In the present study, sixty street dust samples were collected from the central area of Tehran and were digested in the laboratory to determine the content of Zn, Ni, Cd, Cr, Cu and Pb, using inductively coupled plasma optical emission spectrometry (ICP-OES). The level of contamination with the analyzed metals was determined according to the following indices: geo-accumulation index (I _geo), enrichment factor (EF), pollution index (PI), integrated pollution index (IPI) and potential ecological risk index (RI). The average concentration of heavy metals found was in the order of Zn > Cu > Pb > Ni > Cr > Cd. The average I _geo values for Cd, Cr, Cu, Ni, Pb and Zn were 1.53, ?1.88, 2.68, ?0.67, 1.62 and 2.70, respectively. Among the investigated heavy metals, zinc and copper had the maximum average EF values and were placed into the “very severe enrichment” class. Potential ecological risk factor (E _r) also indicated that Cd had the highest risk, and it was classified as of considerable potential ecological risk. Therefore, it is necessary to pay more attention to the appearance of Cd in the human environment. The calculated potential ecological risk index values also illustrated that the street dust samples presented a “moderate ecological risk.” The calculated IPI values showed that the pollution levels of the street dust samples ranged from high to extremely high.     

Seismicity in Major Seismotectonic Provinces of Iran

Seismicity parameters,i.e.,seismic activity rate,X,the so-called Gutenberg-Richter b value(orβ),and maximum possible magnitude,Mmax,for major seismotectonic provinces of Iran are estimated through the application of Kijko and SellevolPs uncertainty models.The uncertainty models facilitated the estimation of seismic activity parameters from incomplete and uncertain data files in the catalog of earthquakes in major seismotectonic provinces of Iran.Zagros has the highest seismic activity rate,and is characterized by the occurrence of mainly small-and mid-sized earthquakes.Kopeh Dagh has the lowest activity rate but is characterized by a greater occurrence of major earthquakes.However,the Makran and Alborz-Azarbayejan seismotectonic provinces are most likely the regions which are capable of generating great earthquakes.