Hydrogeologic-structure and groundwater-movement imaging in tideland using electrical sounding resistivity: a case study on the Ariake Sea coast, southwest Japan

Groundwater flow exerts a crucial control on the boundary between the sea and freshwater and is thus a key factor for preserving groundwater resources and preventing seawater intrusion in coastal areas. Although it is highly probable that geological faults in coastal areas affect groundwater flow patterns, the effect has not been described yet in detail. This study is aimed at detecting and imaging groundwater flow and its temporal change around a fault in a coastal area through resistivity and chargeability distributions using electrical sounding. The Okoshiki area in central Kyushu, southwest Japan, was selected as a case study area, because of the presence of Kamiouda Fault. The measurements were conducted along six lines of both parallel and perpendicular orientations to the coastline. A feature suggesting a fault zone was evident on two lines. Through the temporal change of resistivity, movement and mixing processes of the seawater and freshwater during the ebb, low and flood tides were interpreted. A conceptual model of the processes was constructed in which a fault zone and the configuration of bedrock are dominant elements by acting as a selective path and a barrier to the groundwater flow, respectively.     

Thermal conductivity of NaCl,MgO, coesite and stishovite up to 40 kbar

The thermal conductivity of NaCl, MgO, coesite and stishovite have been measured as a function of pressures up to 40 kbar (4 Gpa) at room temperature. Polycrystalline coesite and stishovite were synthesized under high pressures and temperatures at our laboratory. An improved version of the comparative method suitable for the thermal conductivity measurement of small samples under high pressures was designed. The zero-pressure values are 0.0189 and 0.0412 cal. cm^?1 s^?1 °C^?1 for coesite and stishovite, respectively. The thermal conductivities were found to increase linearly with pressure, and the increase rates relative to their zero-pressure values were 3.1, 0.68, 0.39 and 0.90% per kbar for NaCl, MgO, coesite and stishovite, respectively. On the thermal conductivity of coesite, the pressure dependence is small and the zero-pressure value is almost the same as that of polycrystalline quartz. On the other hand, the zero-pressure value of stishovite is 2.2 times as large as that of coesite.     

Case study of wind jet transition and localized responses of wind wave along the pacific coast of Northern Japan by synergetic use of satellite and in situ observations

We present a case study of low-level wind jets induced in sequence by orographic effects off the Pacific coast of northern Japan during 7–11 June 2003, and demonstrate that the transition of the wind jets causes areal differences of wave height variations along the coast. First, we describe evolution and structure of the wind jet by analyzing SeaWinds scatterometer wind measurements. Under the easterly wind, a strong wind jet formed after passing by Cape Erimo. As the wind shifted to the southeast, the wind jet started to decay. In turn, the southerly wind along the coast led to another wind jet in the lee of the easternmost tip of the Sanriku coast. We then identify onsets and decays of the wind jets from time series of wind speed at meteorological stations. Finally, we demonstrate that the transition of the wind jets has local impacts on wave height variations. Significant wave heights measured by altimeters were correlated positively with local wind energy, i.e., squares of wind speeds. Accompanying the wind jet formation/decline, significant differences of wave height variations became marked among wave observation stations located along the coast at intervals of up to 50 km.     

Interannual variability of Pacific Winter Water inflow through Barrow Canyon from 2000 to 2006

We examined the interannual variability of Pacific Winter Water (PWW), both upstream in the northeastern Chukchi Sea and Barrow Canyon using mooring observations from 2000 to 2006, and downstream in the Canada Basin using hydrographic data acquired in 2002–2006. The interannual variation of PWW salinity is governed by two factors: (1) variability in the salinity of Pacific Water that flows northward through Bering Strait in winter; and (2) the input of salt associated with sea ice formation during winter in an intermittent coastal polynya located along the Alaskan coast between Cape Lisburne and Point Barrow. During the winters of 2000/2001 and 2001/2002 an increased transport of cold and saline PWW (S?>?33.5) to the basin via Barrow Canyon was observed. In 2000/2001 enhanced ice formation in the polynya contributed to the increased salinity of PWW, whereas in 2001/2002 the salinity of water entering through the Bering Strait was higher, and this resulted in more saline PWW being delivered to the basin. In the following four winters (2002/2003, 2003/2004, 2004/2005 and 2005/2006) the transport of cold and saline PWW in winter to the basin was less than that in the two preceding winters. In three of these four winters (2003/2004 being the exception) the coastal polynya was less active, thus reducing the input of salt due to brine enrichment. In the winter of 2003/2004, however, warmer water within the polynya region constrained ice formation and thus less cold and saline PWW was produced, despite the fact that the coastal polynya was active and frequently open.     

Individual exposure to particulate matter in urban and rural Chinese households: estimation of exposure concentrations in indoor and outdoor environments

Natural Hazards - According to the World Health Report, an estimated 540,000 people in China died prematurely due to indoor air pollution in 2009. The major source of indoor air pollution is the...     

Onboard experiment investigating metal leaching of fresh hydrothermal sulfide cores into seawater

We observed the initial release rate of metals from four fresh (i.e., without long time exposure to the atmosphere) hydrothermal sulfide cores into artificial seawater. The sulfide samples were collected by seafloor drilling from the Okinawa Trough by D/V Chikyu, powdered under inert gas, and immediately subjected to onboard metal-leaching experiments at different temperatures (5 °C and 20 °C), and under different redox conditions (oxic and anoxic), for 1–30 h. Zinc and Pb were preferentially released from sulfide samples containing various metals (i.e., Mn, Fe, Cu, Zn, Cd, and Pb) into seawater. Under oxic experimental conditions, Zn and Pb dissolution rates from two sulfide samples composed mainly of iron disulfide minerals (pyrite and marcasite) were higher than those from two other sulfide samples with abundant sphalerite, galena, and/or silicate minerals. Scanning electron microscopy confirmed that the high metal-releasing sample contained several galvanic couples of iron disulfide with other sulfide minerals, whereas the low metal-releasing sample contained fewer galvanic couples or were coated by a silicate mineral. The experiments overall confirmed that the galvanic effects with iron disulfide minerals greatly induce the initial release of Zn and Pb from hydrothermal sulfides into seawater, especially under warm oxic conditions.     

The Hinode (Solar-B) Mission: An Overview

The Hinode satellite (formerly Solar-B) of the Japan Aerospace Exploration Agency’s Institute of Space and Astronautical Science (ISAS/JAXA) was successfully launched in September 2006. As the successor to the Yohkoh mission, it aims to understand how magnetic energy gets transferred from the photosphere to the upper atmosphere and results in explosive energy releases. Hinode is an observatory style mission, with all the instruments being designed and built to work together to address the science aims. There are three instruments onboard: the Solar Optical Telescope (SOT), the EUV Imaging Spectrometer (EIS), and the X-Ray Telescope (XRT). This paper provides an overview of the mission, detailing the satellite, the scientific payload, and operations. It will conclude with discussions on how the international science community can participate in the analysis of the mission data. T. Kosugi deceased 26 November 2006.     

Physical basis of earthquake magnitudes: an extreme value of seismic amplitudes from incoherent fracture of random fault patches

A relation between surface-wave magnitude M_s and fault area S for great earthquakes has been proposed

log S 2M_{s − 11.5 (}M_{s > 7.5)}

A similar formula has been also derived for body-wave magnitude m_b^* redetermined from maximum amplitudes of short-period P-wavetrains

log S ∝ 1.7 m_b^*

These are quite different from a theoretical relation expected on the basis of long-wave approximation. Because wavelengths of seismic waves used for the above magnitudes are very short compared to the size of earthquake sources, these relations represent the short-period nature of the earthquake process. The statistical theory of extreme values has been applied to understand the relations considering that the component waves which constitute the wavetrains for m_b^* and M_s determinations originate from the random fracture of fault heterogeneities.     

实验变形岩石低温破裂作用的微观机制

通过对湿度和压力分别达300℃和3GPa干条件下实验变形的一系列花岗岩样品的系统光学和扫描电镜显微构造分析,识别出了几种具有不同特点及不同变形机制的显微破裂型式:a.微破碎带;b.微透镜带;c.短程破裂;d.扭折带破裂;e.粒内破裂;f.颗粒边界破裂。评价了它们与高压型和低压型破裂的显微构造对应性,认为a和f是低压破裂的特征性构造型式;b、c和d在高压破裂中最为典型;而e则可以出现在两种破裂型式中。本文阐述了破裂作用的微观机制,包括破裂的成核、扩展、生长和连接。破裂作用、由破裂诱发的脆性破裂和碎裂流动在目前实验变形条件下占主导地位,而在相对较高温条件下晶质塑性也起着一定的作用。破裂作用的成核可以始于颗粒边界,而引起摩擦颗粒边界滑移,也可以始于相邻颗粒或晶内包体颗粒的一些端点,或始于晶内双晶和解理面。破裂的生长和扩展一般是由于一些破裂的侧向延伸、相近破裂系统的联合和不同破裂系统的转变。低压样品的最终破裂一般归咎于一些贯穿性微断层的出现及主断层附近微破裂群的产生,微破碎角砾岩是其主要构造岩类型,类似于天然张性断层带构造;而沿主高压破裂附近却从未见到这种微破裂群的出现,主要表现为主破裂面及一些均匀分布的短程破裂构造, 典型构造岩为构造透镜体, 类似于天然压性与压扭性断层构造。两种破裂在成核、扩展与位移发育诸方面表现出的差别有助理解它们在声发射方面的差异。