Field-based description of near-surface crustal deformation in a high-strain shear zone: A case study in southern Kyushu,Japan

This study investigated geological evidence for near-surface crustal deformation in a high-strain shear zone that has been geodetically identified but which is not associated with obvious tectonic landforms. Fieldwork was conducted in the east–west-trending southern Kyushu high-strain shear zone (SKHZ), Japan, focusing mainly on occurrences of fracture zones, which are defined by a visible fracture density of >1 per 10 cm² and are commonly associated with cataclasite, fault breccia, and gouge. The area in which east–west-trending fracture zones are dominant is restricted to the east–west-trending, ~2-km-wide aftershock area of the 1997 Northwestern Kagoshima Earthquakes. Analysis of slip data from minor faults using the multiple inverse method, irrespective of whether the faults are in fracture zones, reveals that the area where the calculated main stress field is consistent with the current stress field estimated from focal-mechanism solutions of microearthquakes is restricted to the east–west-trending aftershock area. This finding for the SKHZ contrasts with the case of the Niigata–Kobe Tectonic Zone, which is a major strain-concentration zone with many exposed active faults in central Japan and for which the stress field estimated using fault-slip data is considered to be uniform and coincides with the current stress field. The cumulative amount of displacement estimated from the areal density of fracture zones in the SKHZ study area is smaller than that estimated from geodetically measured strain rates. Investigations based on slip data from minor faults and fracture-zone occurrence could help to identify concealed faults that are too small to generate tectonic landforms but which are sufficiently large to trigger major earthquakes.     

K-Ar Ages of Tin-Polymetallic Mineralization in the Oruro Mining District, Central Bolivian Tin Belt

Abstract. K-Ar age determinations were carried out on vein- and rock-forming minerals from five vein-type tin-polymetallic ore deposits of the Oruro mining district in the central part of the Bolivian tin belt. The sericite from vein selvedges and an altered host rock provides good estimates of the ages of hypogene mineralization, and supergene alunite and jarosite provide ages for erosional and weathering episodes. It is concluded that hypogene mineralization in the Oruro mining district took place during the early to middle Miocene: 15.8±0.8 Ma at San José, 20.1±l.l Ma at Morococala, 20.5±1.0 Ma at Avicaya, and 19.6±1.0 Ma at Llallagua. Fine grained supergene alunite (δ³⁴S = -10.1 960) and jarosite yield K-Ar ages of 6.7±0.7 Ma at Avicaya and 3.9±0.7 Ma at Bolivar, respectively, suggesting that erosion and chemical weathering were active at those times.     

Experimental and Numerical Investigations of Ground Deformation Using Chemical Grouting for Pipeline Foundation

Based on experimental and numerical investigations, the present paper focuses on under ground scope (UGS) chemical grouting method that can actually improve the pipeline surrounding foundation to solve pipeline saggy damage. According to the experimental results, a solution-type injection material could make lager soil deformation, using less total slurry amount than suspension-type injection material. Therefore, a suspension-type injection material with shorter gel time is more suitable for the UGS method, making it more effective to reinforce the pipeline foundation and restore pipelines. The results of some patterns of injection tests revealed relationship between the behavior of the grouting material and the deformation of the soil. It is found that the material can be injected into a foundation by fracture grouting if the permeation coefficient is lower than 1.00 × 10⁻³ mm/s. The situation was analyzed by using 2-D finite element method analysis software Phase2, and the analysis result proposes that the real data and simulation data are nearly the same in impermeable soil. Furthermore, even if the construction object is permeable soil, it can also be become impermeable soil by two phases grouting: soil improvement grouting and restoration grouting.     

A petrological and geochemical study on time-series samples from Klyuchevskoy volcano,Kamchatka arc

To understand the generation and evolution of mafic magmas from Klyuchevskoy volcano in the Kamchatka arc, which is one of the most active arc volcanoes on Earth, a petrological and geochemical study was carried out on time-series samples from the volcano. The eruptive products show significant variations in their whole-rock compositions (52.0–55.5 wt.% SiO₂), and they have been divided into high-Mg basalts and high-Al andesites. In the high-Mg basalts, lower-K and higher-K primitive samples (>9 wt.% MgO) are present, and their petrological features indicate that they may represent primary or near-primary magmas. Slab-derived fluids that induced generation of the lower-K basaltic magmas were less enriched in melt component than those associated with the higher-K basaltic magmas, and the fluids are likely to have been released from the subducting slab at shallower levels for the lower-K basaltic magmas than for higher-K basaltic magmas. Analyses using multicomponent thermodynamics indicates that the lower-K primary magma was generated by ~13% melting of a source mantle with ~0.7 wt.% H₂O at 1245–1260?°C and ~1.9 GPa. During most of the evolution of the volcano, the lower-K basaltic magmas were dominant; the higher-K primitive magma first appeared in AD 1932. In AD 1937–1938, both the lower-K and higher-K primitive magmas erupted, which implies that the two types of primary magmas were present simultaneously and independently beneath the volcano. The higher-K basaltic magmas evolved progressively into high-Al andesite magmas in a magma chamber in the middle crust from AD 1932 to ~AD 1960. Since then, relatively primitive magma has been injected continuously into the magma chamber, which has resulted in the systematic increase of the MgO contents of erupted materials with ages from ~AD 1960 to present.     

Model analysis of radar echo split observed in an artificial cloud seeding experiment

An artificial cloud seeding experiment was performed over the Japan Sea in winter to show how massive seeding could be effective to mitigate heavy snowfall damage. The results showed that 20 min after cloud seeding, a portion of the radar echo beneath the seeding track was weakened to divide the radar echo into two parts. In order to analyze the results, a numerical simulation was conducted by using the Weather Research and Forecasting model verion 3.5.1. In this simulation, the seeding effects were represented as phenomena capable of changing rain particles by accreting cloud ice and snow to form graupel particles and by changing cloud liquid water to snow particles. The graupel particles fell rapidly, thus temporarily intensifying the rainfall, which subsequently decreased. Therefore, the weakened radar echo in the field experiment is deemed to have been caused by the increase in rapidly falling graupel particles.     

Episodic exhumation of accretionary complexes: Fission-track thermochronologic evidence from the Shimanto Belt and its vicinities, southwest Japan

Abstract Apatite and zircon fission-track (FT) analyses of the Shimanto accretionary complex and its vicinities, southwest Japan, unraveled the episodic material migration of the deep interiors of the accretionary complex. Apatite data with 100°C closure temperature (T_e) generally indicate ~10 Ma cooling throughout the Shimanto complex. In contrast, zircon data with 260°C T_e exhibit a wide range of apparent ages as a consequence of paleotemperature increase to the zircon partial annealing zone. In the Muroto and Kyushu regions, maximum temperatures tend to have been higher in the northern, older part of the complex, with indistinguishable temperature differences between coherent and melange units adjacent to each other. It thus suggests, along with vitrinite reflectance data, that older accretionary units occurring to the north sustain greater maximum burial during the accretion-burial-exhumation process. Zircon data suggest two cooling episodes: ~70 Ma cooling at widespread localities in the Cretaceous Shimanto Belt and Sambagawa Belt, and ~15 Ma cooling in the central Kii Peninsula. The former is consistent with ⁴⁰Ar/³⁹Ar cooling ages from the Sambagawa Belt, whereas the latter slightly predates the widespread 10 Ma apatite cooling ages. These data imply that the extensive material migration and exhumation took place in and around the Shimanto complex in Late Cretaceous as well as in Middle Miocene. Considering tectonic factors to control evolution of accretionary complexes, the episodic migration is best explained by accelerated accretion of sediments due to increased sediment influx at the ancient Shimanto trench, probably derived from massive volcano-plutonic complexes contemporaneously placed inland. Available geo- and thermochronologic data suggest that extensive magmatism triggered regional exhumation twice in the past 100 Ma, shedding new light on the cordilleran orogeny and paired metamorphism concepts.     

Thermal structure of hot events and their possible role in maintaining the warm isothermal layer in the Western Pacific warm pool

Ocean Dynamics - The short-lived events of high SST are called hot events (HEs) and can only be generated under the conditions of large daily heat gain due to strong solar radiation and weak wind....     

A Raman spectroscopic study of shock-wave densification of vitreous silica

The densification processes in SiO₂ glass induced by shock-wave compression up to 43.4 GPa are investigated by Raman spectroscopy. At first, densification increases with increasing shock pressure. A maximum densification of 11% is obtained for a shock pressure of 26.3 GPa. This densification is attributed to the reduction of the average Si−O−Si angle, which occurs first by the collapse of the largest ring cavities, then by further reduction of the average ring size. For higher shock pressures, a different structural modification is observed, resulting in decreasing densification with increasing shock pressure. Indeed, the recovered densification becomes very small, with values of 1.8 and 0.5% at 32 and 43.4 GPa, respectively. This is attributed to partial annealing of the samples due to high after shock residual temperatures. The study of the annealing process of the most densified glass by in situ high temperature Raman spectroscopy confirms that relaxation of the Si−O−Si angle starts at a lower temperature (about 800 K) than that of the siloxane rings (about 1000 K), thus explaining the high intensity of the siloxane defect bands in the samples schocked at compressions of 32 and 43.4 GPa. The large intensity of the siloxane bands in the nearly undensified samples shocked by compressions above 30 GPa may be explained by the relaxation during decompression of five- and six-fold coordinated silicon species formed at high pressure and high temperature during the shock event. Received: March 30, 1998 / Revised, accepted: August 21, 1998