A study on the seismic behavior of a retrofitted building based on nonlinear static and dynamic analyses

This study describes the seismic performance of an existing five storey reinforced concrete building which represents the typical properties of low-rise non-ductile buildings in Turkey. The effectiveness of shear walls and the steel bracings in retrofitting the building was examined through nonlinear static and dynamic analyses. By using the nonlinear static analysis, retrofitted buildings seismic performances under lateral seismic load were compared with each other. Moreover, the performance points and response levels of the existing and retrofitting cases were determined by way of the capacity-spectrum method described in ATC-40 (1996). For the nonlinear dynamic analysis the records were selected torepresent wide ranges of duration and frequency content. Considering the change in the stiffness and the energy dissipation capacities, the performance of the existing and retrofitted buildings were evaluated in terms of story drifts and damage states. It was found that each earthquake record exhibited its own peculiarities, dictated by frequency content, duration, sequence of peaks and their amplitude. The seismic performance of retrofitted buildings resulted in lower displacements and higher energy dissipation capacity depending mainly on the properties of the ground motions and the retrofitting strategies. Moreover, severe structural damage (irreparable or collapse) was observed for the existing building. However, buildings with retrofit alternatives exhibited lower damage levels changing from no damage to irreparable damage states.     

An operational modal analysis method in frequency and spatial domain

A frequency and spatial domain decomposition method （FSDD） for operational modal analysis （OMA） is presented in this paper, which is an extension of the complex mode indicator function （CMIF） method for experimental modal analysis （EMA）. The theoretical background of the FSDD method is clarified, Singular value decomposition is adopted to separate the signal space from the noise space. Finally, an enhanced power spectrum density （PSD） is proposed to obtain more accurate modal parameters by curve fitting in the frequency domain. Moreover, a simulation case and an application case are used to validate this method.     

Rocky desertification and its causes in karst areas: a case study in Yongshun County,Hunan Province,China

Rocky desertification, a process of land degradation characterized by soil erosion and bedrock exposure, is one of the most serious land degradation problems in karst areas, and is regarded as an obstacle to local sustainable development. It is well known that human activities can accelerate rocky desertification; however, the effects of climate change on rocky desertification in karst areas are still unclear. This study focused on the effects of temperature and precipitation changes and human activities on rocky desertification in karst areas to determine the impacts of climate change and human disturbances on rocky desertification. Areas of different level of rocky desertification were obtained from Landsat TM (1987) and Landsat ETM+ (2000) images. The results show that, although the total desertification area increased by only 1.27% between 1987 and 2000, 17.73% of the slightly desertified land had degraded to a moderate or intense level, 2.01 and 15.71%, respectively. Meanwhile, between 1987 and 2000, the air temperature increased by 0.7°C, and precipitation increased by 170 mm. Statistical results indicate that the increase in precipitation was caused by heavy rainfall. In addition, under the interactive influences of heavy rainfall and temperature, the average karst dissolution rate was about 87 m³ km⁻² a⁻¹ during the 14 years in the study area. Further analysis indicated that rocky desertification was positively related with the increase in temperature and precipitation and especially with the heavy rainfall events. Climate change accelerated rocky desertification in the karst areas. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Erratum to: Geochemical and environmental magnetic characteristics of high arsenic aquifer sediments from Datong Basin,northern China

Geochemical and environmental magnetic studies were carried out to identify the effect of iron oxyhydroxides on arsenic mobilization in high arsenic aquifer system. Using high arsenic sediment samples from two boreholes, specifically drilled for this study, chemical composition and magnetic properties including magnetic susceptibility, saturation remnant magnetization, and isothermal remnant magnetization were measured. Results of correlation analysis of element contents show that arsenic and iron are closely associated with each other (r ² = 0.40, α = 0.05, n = 21). In contrast, the correlation of phosphorus with iron (r = 0.11, α = 0.05, n = 21) and arsenic (r ² = 0.18, α = 0.05, n = 21) was poor, which might result from competitive adsorption of phosphorus and arsenic on the surface of Fe-oxyhydroxides. The high correlation coefficients between arsenic contents and magnetic parameters suggest that the ferrimagnetic minerals including maghemite and hematite are the dominant carrier of arsenic in aquifer sediments. The results of sequential extraction experiments also revealed the association of arsenic with reducible iron oxides, such as maghemite and hematite in aquifer sediments. Therefore, under reducing conditions, reductive dissolution and desorption of arsenic from Fe-oxyhydroxides into the aqueous phase should be the dominant geochemical processes for its enrichment in groundwater at Datong. An erratum to this article can be found at     

Organic tracers in sediments from the coastal zone of Ras Abu el-Darag,Gulf of Suez

Sediment samples from the coastal zone of the Gulf of Suez contain a variety of organic compounds from anthropogenic and natural sources. A total of 12 surface samples of bottom sediments were collected with an Ekman grab sampler along an off-shore transect south of Ras Abu el-Darag. The samples were extracted with a mixture of dichloromethane and methanol (3:1 v/v) after drying and sieving through 250 μm mesh. The extracts were derivatized and analyzed by gas chromatography–mass spectrometry in order to characterize the chemical composition and sources of the organic components. Marine with minor terrestrial biota were the major natural sources of organic tracers and included n-alkanoic acids, sterols and saccharides (5.7–76.7%). Anthropogenic sources, from petroleum related activities, detergent usage for spill cleaning and littering, are indicated by the presence of n-alkanes with carbon preference index ≤1.0, hopanes, steranes, unresolved complex mixture of branched and cyclic hydrocarbons, alkyl nitriles, alkamides and plasticizers. Their total relative concentrations ranged from 23.3 to 97.3% of the total extracts. Petroleum residues from natural seepage may also be part of these hydrocarbons. The levels of anthropogenic inputs decrease from about 94% in coastal zone sediments to about 20% in sediments from the reef front.     

Computerised development control and approval system for City Hall of Kuala Lumpur

This paper will discuss the computerised development control and approval system being developed for the Planning and Development Control Department, City Hall of Kuala Lumpur, with stress on the GIS architecture developed within the system. The prospects and challenges towards implementation of the system are also discussed.     

Seismic response control of a complex structure using multiple MR dampers： experimental investigation

This paper presents an experimental investigation on semi-active seismic response control of a multistory building with a podium structure using multiple magnetorheological (MR) dampers manipulated by a logic control algorithm. The experiments are performed in three phases on a seismic simulator with a slender 12-story building model representing a multi-story building and a relatively stiff 3-story building model typifying a podium structure. The first phase of the investigation is to assess control performance of using three MR dampers to link the 3-story building to the 12-story building, in which seismic responses of the controlled two buildings are compared with those of the two buildings without any connection and with rigid connection. The second phase is to investigate reliability of the semi-active control system and robustness of the logic control algorithm when 2 out of 3 MR dampers fail and when the electricity supply to MR dampers is completely stopped. The last phase is to examine sensitivity of semi-active control performance of two buildings to change in ground excitation. The experimental results show that multiple MR dampers with the logic control algorithm can achieve a significant reduction in seismic responses of both buildings. The proposed semi-active control system is of high reliability and good robustness.     

Dynamic responses under the excitation of pulse sequences

This paper studies the dynamic responses of SDOF system under pulse-dominant excitations. The purpose of the study is to prepare for scrutiny of some near-field pulse-dominant ground motions and their potential to cause structural damage. Extending the single pulse dynamics, we consider the effect of pulse sequences. This kind of excitation was particularly obvious in some of previous earthquakes such as Northridge (1994) and Chi-Chi (1995). Based on the duration,peak and rise and decay era of the main pulse as well as its relationship with the predecessor and successor pulses, we propose a classification for the pulse sequences. Consequent studies have been carried out for acceleration, velocity and displacement response spectra of the main pulse with either a predecessor or a successor pulse. The analysis also includes general response behaviors in different fundamental period segments and special aspects of response at certain points (e.g., the corresponding peak points).     

Liquefaction mitigation in silty soils using composite stone columns and dynamic compaction

The objective of this study is to develop an analytical methodology to evaluate the effectiveness ofvibro stone column (S. C.) and dynamic compaction (D.C.) techniques supplemented with wick drains to densify and mitigate liquethctionin saturated sands and non-plastic silty soils. It includes the following: (i) develop numerical models to simulate and analyze soil densification during S.C. installation and D.C. process, and (ii) identify parameters controlling post-improvement soil density in both cases, and (iii) develop design guidelines for densification of silty soils using the above techniques. An analytical procedure was developed and used to simulate soil response during S.C. and D.C. installations, and the results were compared with available case history data. Important construction design parameters and soil properties that affect the effectiveness of these techniques, and construction design choices suitable for sands and non-plastic silty soils were identified. The methodology is expected to advance the use of S.C. and DC. in silty soils reducing the reliance on expensive field trials as a design tool. The ultimate outcome of this research will be design charts and design guidelines for using composite stone columns and composite dynamic compaction techniques in liquefaction mitigation of saturated silty soils.     

Comparison of seismic actions and structural design requirements in Chinese code GB 50011 and international standard ISO 3010

This paper presents a comparison between the Chinese Code GB50011-2001 and the International Standard ISO3010: 2001(E), emphasizing the similarities and differences related to design requirements, seismic actions and analytical approaches. Similarities include: earthquake return period, conceptual design, site classification, structural strength and ductility requirements, deformation limits, response spectra, seismic analysis procedures, isolation and energy dissipation, and nonstructural elements. Differences exist in the following areas: seismic levels, earthquake loading, mode damping factors and structural control.