Internal stratigraphic relationships in the Etendeka group in the Huab Basin, NW Namibia: understanding the onset of flood volcanism

The Etendeka Igneous Province in NW Namibia forms the eastern most extent of the Paraná–Etendeka Flood Basalt Province and, despite only covering about 5% of the Paraná–Etendeka, has been the focus of much interest, due to its extremely well exposed nature. The Huab Basin in NW Namibia forms the focus of this study, and formed a connected basin with the Paraná throughout Karoo times (late Palaeozoic) into the Lower Cretaceous. It contains a condensed section of the Karoo deposits, which indicate early periods of extension, and Lower Cretaceous aeolian and volcanic Etendeka deposits, which have their correlatives in the Paraná. In the Huab Basin, the volcanic rocks of the Etendeka Group consists of the Awahab and Tafelberg Formations, which are separated by a disconformity. Detailed examination of the Awahab Formation reveals an additional disconformity, which separates olivine-phyric basalts (Tafelkop-type) from basalt/basaltic andesites (Tafelberg-type) marking out a shield volcanic feature which is concentrated in an area to the SE of the Huab River near to the Doros igneous centre. Early volcanism consisted of pahoehoe style flows of limited lateral extent, which spilled out onto aeolian sands of an active aeolian sand sea 133 million years ago. This sand sea is equivalent to the sands making up the Botucatu Formation in the Paraná basin. The early expression of flood volcanism was that of laterally discontinuous, limited volume, pahoehoe flows of Tafelkop-type geochemistry, which interleaved with the aeolian sands forming the Tafelkop–Interdune Member basalts. These basalts are on-lapped by more voluminous, laterally extensive, basalt/basaltic andesite flows indicating a step-up in the volume and rate of flood volcanism, leading to the preservation of the shield volcanic feature. These geochemically distinct basalts/basaltic andesites form the Tsuhasis Member, which are interbeded with the Goboboseb and Sprinkbok quartz latite flows higher in the section. The Tsuhasis Member basalts, which form the upper parts of the Awahab Formation, are of Tafelberg-type geochemistry, but are stratigraphically distinct from the Tafelberg lavas, which are found in the Tafelberg Formation above. Thus, the internal stratigraphy of the flood basalt province contains palaeo-volcanic features, such as shield volcanoes, and other disconformities and is not that of a simple layer-cake model. This complex internal architecture indicates that flood volcanism started sporadically, with low volume pahoehoe flows of limited lateral extent, before establishing the more common large volume flows typical of the main lava pile.     

Recognition of Regional Water Table Patterns for Estimating Recharge Rates in Shallow Aquifers

We propose a new method for groundwater recharge rate estimation in regions with stream-aquifer interactions, at a linear scale on the order of 10 km and more. The method is based on visual identification and quantification of classically recognized water table contour patterns. Simple quantitative analysis of these patterns can be done manually from measurements on a map, or from more complex GIS data extraction and curve fitting. Recharge rate is then estimated from the groundwater table contour parameters, streambed gradients, and aquifer transmissivity using an analytical model for groundwater flow between parallel perennial streams. Recharge estimates were obtained in three regions (areas of 1500, 2200, and 3300 km²) using available water table maps produced by different methods at different times in the area of High Plains Aquifer in Nebraska. One region is located in the largely undeveloped Nebraska Sand Hills area, while the other two regions are located at a transition zone from Sand Hills to loess-covered area and include areas where groundwater is used for irrigation. Obtained recharge rates are consistent with other independent estimates. The approach is useful and robust diagnostic tool for preliminary estimates of recharge rates, evaluation of the quality of groundwater table maps, identification of priority areas for further aquifer characterization and expansion of groundwater monitoring networks prior to using more detailed methods.     

The zoogeomorphology of case-building caddisfly: Quantifying sediment use

Caddisfly (Trichoptera) larvae are an abundant and widespread aquatic insect group characterized by the construction of silk structures, including nets and cases. Case-building caddisfly have the potential to modify the sorting and mobility of sand and fine gravel via: (1) case construction, resulting in altered sediment properties; (2) transporting sediment incorporated into cases over the river bed; and (3) changing the structure of river beds via burrowing activity. To investigate these mechanisms, it is necessary to understand the mass, size distribution and spatial variability of sediment use by case-building caddisfly larvae. We quantified the mineral sediment used by individuals and communities of case-building caddisfly in 27 samples, from three sites on a gravel-bed stream. The mass and size distribution of sediment in individual cases varied between taxa (mass = 0.001–0.83 g, D₅₀ = 0.17–4 mm). The mean mass of sediment used by the caddisfly community was 38 g m⁻² and varied locally. Sediment use was predominantly coarse sand (D₅₀ = 1 mm). 64% of sediment use was attributable to Agapetus fuscipes (Glossosomatidae). Due to within-species variability in case mass, the abundance of most taxa, including A. fuscipes, was only weakly associated with the mass of sediment used by this species, at the river scale. Whilst the caddisfly community used a small percentage of the total sediment available (average 2.99% of the 1–1.4 mm size fraction), A. fuscipes used more fine sediment in their cases at sites where it was more available. Despite variability in local habitat, all sites supported diverse case-building caddisfly communities utilizing mineral sediment. Consequently, geomorphological effects of case-building caddisfly are potentially widespread. The results provide novel insights into the specific grain sizes and quantities of fine sediment used by caddisfly larvae, which represents an important step towards understanding their zoogeomorphic activities. © 2019 The Authors. Earth Surface Processes and Landforms Published by John Wiley & Sons Ltd.     

Scroll bars are inner bank levees along meandering river bends

Scroll bars across a 65-km stretch of the Trinity River in Texas, USA were studied using LiDAR data as well as with a series of 11 trenches spread out across the survey area. We conclude that scroll bars are levees that are deposited along the inner banks of these meandering river bends. Scroll bar crests were found to have similar elevations to those of outer bank levee crests, implying that they are constructional features that create positive topographic relief above the elevation of the floodplain. Trenches reveal that scroll bars are built from reworked suspended sediment, with common ripple-scale cross stratification, planar laminations and muddy bioturbated layers – characteristics often associated with levee sedimentation in other systems. LiDAR observation of the erosion of scroll bars by bed material transport during flood implies that scroll bar spacing is an imperfect proxy for estimating overall channel migration rates. In addition, interspersed lenses of coarser sediment with dune-scale cross stratification represent the stratigraphic record of these erosional events and suggest that erosion of the channel-ward edge of the scroll bar is not uncommon. Preservation of scroll bars is unlikely, given that they are responsible for an average of only the uppermost 12% of the total inner bank relief. We suggest that misidentification of point bar lateral accretion surfaces as scroll bars is common and can lead to issues with reconstructing channel properties due to systematic differences between point bar and scroll bar planform geometries. © 2019 John Wiley & Sons, Ltd. © 2019 John Wiley & Sons, Ltd.     

Solar Eclipses and the Surface Properties of Water

Earth, Moon, and Planets - During four solar eclipse events (two annular, one total and one partial) a correlation was observed between a change in water surface tension and the magnitude of the...     

Anatomy and facies distribution of terminal lobes in ephemeral fluvial successions: Jurassic Tordillo Formation,Neuquén Basin,Argentina

In terminal fluvial-fan systems, characteristic proximal to distal variations in sedimentary architectures are recognized to arise from progressive downstream loss of water discharge related to both infiltration and evaporation. This work aims to elucidate downstream trends in facies and architecture across the medial and distal zones of terminal-fan systems, which record transitions from deposits of channel elements to lobe-like and sheet-like elements. This is achieved via a detailed characterization of ancient ephemeral fluvial deposits of the well-exposed Kimmeridgian Tordillo Formation (Neuquén Basin, Argentina). The fine sand-prone and silt-prone succession associated with the medial to distal sectors of the system has been studied to understand relationships between depositional processes and resulting architectures. Facies and architectural-element analyses, and quantification of resulting sedimentological data at multiple scales, have been undertaken to characterize sedimentary facies, facies transitions, bed types, architectural elements and larger-scale architectural styles. Eight bed types with distinct internal facies transitions are defined and interpreted in terms of different types of flood events. Channelized and non-channelized architectural elements are defined based on their constituent bed types and their external geometry. The most common elements are terminal lobes, which are composite bodies within which largely unconfined sandy deposits are stacked in a compensational manner; a hierarchical arrangement of internal components is recognized. Proximal feeder-channel avulsion events likely controlled the evolution of terminal-lobe elements and their spatiotemporal shifts. Stratigraphic relations between architectural elements record system-wide trends, whereby a proximal sector dominated by channel elements passes downstream via a gradational transition to a medial sector dominated by sandy terminal-lobe elements, which in turn passes further downstream to a distal sector dominated by silty terminal lobe-margin and fringing deposits. This work enhances current understanding of the stratigraphic record of terminal fluvial systems at multiple scales, and provides insight that can be applied to predict the facies and architectural complexity of terminal fluvial successions.     

Remote sensing of intertidal morphological change in Morecambe Bay,U.K., between 1991 and 2007

Tidal Flats are important examples of extensive areas of natural environment that remain relatively unaffected by man. Monitoring of tidal flats is required for a variety of purposes. Remote sensing has become an established technique for the measurement of topography over tidal flats. A further requirement is to measure topographic changes in order to measure sediment budgets. To date there have been few attempts to make quantitative estimates of morphological change over tidal flat areas. This paper illustrates the use of remote sensing to measure quantitative and qualitative changes in the tidal flats of Morecambe Bay during the relatively long period 1991–2007. An understanding of the patterns of sediment transport within the Bay is of considerable interest for coastal management and defence purposes. Tidal asymmetry is considered to be the dominant cause of morphological change in the Bay, with the higher currents associated with the flood tide being the main agency moulding the channel system. Quantitative changes were measured by comparing a Digital Elevation Model (DEM) of the intertidal zone formed using the waterline technique applied to satellite Synthetic Aperture Radar (SAR) images from 1991–1994, to a second DEM constructed from airborne laser altimetry data acquired in 2005. Qualitative changes were studied using additional SAR images acquired since 2003. A significant movement of sediment from below Mean Sea Level (MSL) to above MSL was detected by comparing the two Digital Elevation Models, though the proportion of this change that could be ascribed to seasonal effects was not clear. Between 1991 and 2004 there was a migration of the Ulverston channel of the river Leven north-east by about 5 km, followed by the development of a straighter channel to the west, leaving the previous channel decoupled from the river. This is thought to be due to independent tidal and fluvial forcing mechanisms acting on the channel. The results demonstrate the effectiveness of remote sensing for measurement of long-term morphological change in tidal flat areas. An alternative use of waterlines as partial bathymetry for assimilation into a morphodynamic model of the coastal zone is also discussed.     

Charting the territory: Exploring stakeholder reactions to the prospect of seafloor exploration and mining in Australia

Geological surveys of Australia’s marine territory have revealed significant potential for development of a marine resource industry. As onshore mineral deposits become harder to find, less accessible to their market and more challenging to extract, seafloor exploration and mining becomes an economically viable option. However, evidence from industry and environmental literature suggests that social acceptance will be important in determining the future of this industry in Australia. This paper reports on findings from research investigating the social viability of seafloor mining in Australia. A combination of interviews and focus groups were used to explore industry and community reactions to the possible development of seafloor mining in Australia. Although stakeholders’ reactions were variable, the majority of the participants were reluctant to see development of seafloor mining in Australia, primarily because of concerns about the industry’s potential environmental impact. All stakeholders sought further information about the benefits and costs associated with the industry suggesting that they did not yet have a fixed attitude towards the industry. Stakeholders favoured a precautionary approach towards the industry, supported by rigorous scientific analysis of the potential environmental impacts, transparent and socially responsive management processes and meaningful engagement with stakeholders.     

Regional assessment of landslide impact in the Three Gorges area, China, using ASTER data: Wushan-Zigui

This paper is focussed on the hazard impact of landslides in the Three Gorges, and represents the progression of our ongoing study on regional land instability assessment in the Three Gorges area using imagery data from the Advanced Spaceborne Thermal Emission Radiometer (ASTER). The key development here is the establishment of a model that integrates land instability with several factors that can relate hazard to human life, such as slope failures occurring in proximity to built-up areas and roads, and areas of high landslide risk along the bank of Yangtze and its major tributaries. The method correctly identifies some of the known destructive landslides in the region, like Qianjiangping and Huangtupo, as belonging to areas of potentially high landslide impact. Our results suggest that several population centres, including the towns of Wushan and Badong, are rated at high landslide hazard levels. This study highlights the importance of differentiating between landslide types within susceptibility assessment, and identifies those locations in the Three Gorges where the probability of landslide occurrence with negative impact to life and property is greatest.