An Evaluation of Internet Versus Paper‐based Methods for Public Participation Geographic Information Systems (PPGIS)

Public participation geographic information systems (PPGIS) are an increasingly important tool for collecting spatial information about the social attributes of place. The availability of Internet‐based options for implementing PPGIS presents new opportunities for increased efficiency and new modes of access. Here we used a mixed‐mode approach to evaluate paper versus Internet mapping methods for the same PPGIS survey in Wyoming. We compared participant characteristics, mapping participation, and the spatial distribution of mapped attributes between participants who responded to the paper versus Internet option. The response rate for those who completed the paper version of the survey was nearly 2.5 times the response rate of the Internet version. Paper participants also mapped significantly more places than did Internet participants (43 vs. 18). Internet participants tended to be younger, more likely to have a college degree, and had lived in the region for less time than paper participants. For all but one attribute there was no difference in the spatial distribution of places mapped between Internet and paper methods. Using a paper‐based PPGIS survey resulted in a higher response rate, reduced participant bias, and greater mapping participation. However, survey mode did not influence the spatial distribution of the PPGIS data.     

Sea‐level markers identified in ground‐penetrating radar data collected across a modern beach ridge system in a microtidal regime

Sea‐level rise has been related to global warming. The modern system on the northern coast of Anholt, Denmark, may well be analogous to other beach ridge systems formed in microtidal regimes and our results should have impact on estimation of past sea‐level variation. Ground‐penetrating radar data collected across the modern (<30 years old) berm, beach ridge and swale deposits resolve downlapping reflections interpreted to mark sea level at the time of deposition. Existing time series of sea‐level data constrain actual sea‐level variation. Nineteen readings of sea‐level markers made along our profile fluctuate within ?0.42 and 0.57 m above present mean sea level, consistent with 95% of the sea‐level data. These fluctuations reflect tidal effects and meteorological conditions. Main data uncertainties are well‐known and the sea‐level markers may be identified with a high degree of confidence.     

Boulder shores in South Africa – a distinct but poorly documented coastal habitat type

This study compares the composition, species richness and biomass of macrofaunal and algal assemblages on intertidal boulder shores as compared with those on adjacent rock-platforms, at six sites along the southwest coast of South Africa. Of 214 species identified, 175 were recorded on boulder shores and 124 on rock-platform shores; of these, 99 species were common to both habitat types, 92 were exclusive to boulders, and 23 were exclusive to rock-platforms. Significant differences in community structure (F_(1,95) = 13.02, p < 0.01) (PERMANOVA test), species richness (F_(1,95) = 14.28, p < 0.01), biomass (F_(1,95) = 9.45, p < 0.01) and diversity (F_(1,95) = 578.83, p < 0.01) (two-way ANOVA) were detected between the two habitat types. Average dissimilarity of community structure between rock-platform and boulder shores was 87.96% (SIMPER analysis). The increased species richness and biomass on boulder shores extended across all tidal levels, but was most marked in the highshore. These results confirm that boulder shores along the southwestern Cape support a distinct biota, richer and very different from that on adjacent rock-platforms, and rich in boulder-dependent species. We propose that boulder shores merit separate management and conservation targets as compared to rock-platforms, though the ecology of boulder shores in the region remains very poorly known and requires further study.     

Adaptation to high light irradiances enhances the photosynthetic Cu resistance in Cu tolerant and non-tolerant populations of the brown macroalgae Fucus serratus

The relationship between light acclimation and Cu²⁺ tolerance was studied in two populations of Fucus serratus known to be naturally non-tolerant and tolerant to Cu²⁺. Acclimation to high irradiances increased the photosynthetic tolerance to Cu²⁺. The xanthophyll cycle was apparently not involved in protecting the photosynthetic apparatus against Cu²⁺ toxicity, as results showed that Cu²⁺ did not induce dynamic photoinhibition. The higher photosynthetic Cu²⁺ resistance of high light algae did not result in increased growth. The excess energy acquired by high light-adapted algae appeared to be utilized in Cu²⁺ defense mechanisms in the Cu²⁺ non-tolerant population. The polyphenol content of the algae was reciprocal to the Cu_T content, suggesting that polyphenol may be the primary Cu²⁺ defense of non-tolerant low light algae, acting through secretion and extracellular chelating of Cu²⁺, while the compounds do not seem to be involved in the primary Cu²⁺ tolerance mechanism in Cu²⁺ tolerant algae.     

Towards spatially distributed quantitative assessment of tsunami inundation models

This paper presents a framework and data for spatially distributed assessment of tsunami inundation models. Our associated validation test is based upon the 2004 Indian Ocean tsunami, which affords a uniquely large amount of observational data for events of this kind. Specifically, we use eyewitness accounts to assess onshore flow depths and speeds as well as a detailed inundation survey of Patong City, Thailand to compare modelled and observed inundation. Model predictions matched well the detailed inundation survey as well as altimetry data from the JASON satellite, eyewitness accounts of wave front arrival times and onshore flow speeds. Important buildings and other structures were incorporated into the underlying elevation model and are shown to have a large influence on inundation extent.     

Local and regional variation of MORB parent magmas: evidence from melt inclusions from the Endeavour Segment of the Juan de Fuca Ridge

The development of petrogenetic models of igneous processes in the mantle is dependent on a detailed knowledge of the diversity of magmas produced in the melting regime. These primary magmas, however, undergo significant mixing and fractionation during transport to the surface, destroying much of the evidence of their primary diversity. To circumvent this problem and to determine the diversity of melts produced in the mantle, we used melt inclusions hosted in primitive plagioclase phenocrysts from eight mid-ocean ridge basalts from the axial and West Valleys of the Endeavour Segment, Juan de Fuca Ridge. This area was selected for study because of the demonstrated close association of enriched (E-MORB) lavas and incompatible element enriched depleted (N-MORB) lavas. Rehomogenized melt inclusions from E-MORB, T-MORB, and N-MORB lavas have been analyzed by electron and ion microprobe for major and trace elements. The depleted and enriched lavas, as well as their melt inclusions, have very similar compatible element concentrations (major elements, Sr, Ni and Cr). Inclusion compositions are more primitive than, yet collinear with, the host lava suites. In contrast, the minor and trace element characteristics of melt inclusions from depleted and enriched lavas are different both in range and absolute concentration. N-MORB lavas contain both depleted and enriched melt inclusions, and therefore exhibit the largest compositional range (K₂O: 0.01 to 0.4 oxide wt%, P₂O₅: <0.01 to 0.2 oxide wt%, La_N: 7 to 35, Yb_N: 1 to 13, and Ti/Zr: <100 to 1300). E-MORB lavas contain only enriched inclusions, and are therefore relatively homogeneous (K₂O: 0.32 to 0.9 oxide wt %, P₂O₅: 0.02 to 0.35 oxide wt%, La_N: 11 to 60, Yb_N: 4 to 21, and Ti/Zr: ∼100). In addition, the most primitive E-32 inclusions are similar in composition to the most enriched inclusions from the depleted hosts. Major element data for melt inclusions from both N-MORB and E-MORB lavas suggest that the magmas lie on a low pressure cotectic, consistent with a petrogenesis including fractional crystallization. However, the minor and trace element compositions in melt inclusions vary independently of the major element composition implying an alternative history. When fractionation-corrected, inclusion compositions correlate with their host glass composition. Hence, the degree of enrichment of the lavas is a function of the composition of aggregated melts, not of processing in the upper mantle or lower crust. Based on this fact, the lava suites are not produced from a single parent magma, but from a suite of primary magmas. The chemistry of the melt inclusions from the enriched lavas is consistent with a derivation from variable percentages of partial melting within the spinel stability field by a process of open system (continuous or critical) melting assuming a depleted lherzolite source veined with clinopyroxenite. The low percentage melts are dominantly enriched melts of the clinopyroxenite. In contrast, the depleted lavas were created by melting of a harzburgite source, possibly fluxed with a fluid enriched in K, Ba and the LREE. Such a source was likely melted up to or past the point at which all of its clinopyroxene was consumed. This set of characteristics is consistent with a scenario by which diverse melts produced at different depths travel through the melting regime to the base of the crust without homogenizing en route. The homogeneous major element characteristics are created in the lower crust by fractional crystallization and reaction with lower crustal gabbros. Therefore, the degree of decoupling between major and trace element characteristics of the melt inclusions (and lavas) is dictated by the reaction rate of the melts with the materials in the conduit walls, as well as the residence times and flux rate, in the upper mantle and lower crust. Received: 2 December 1997 / Accepted: 27 August 1998     

The Vakkejokk Breccia: An Early Cambrian proximal impact ejecta layer in the North‐Swedish Caledonides

The ≤27 m thick Vakkejokk Breccia is intercalated in autochthon Lower Cambrian along the Caledonian front north of Lake Torneträsk, Lapland, Sweden. The spectacular breccia is here interpreted as a proximal ejecta layer associated with an impact crater, probably ~2–3 km in size, located below Caledonian overthrusts immediately north of the main breccia section. The impact would have taken place in a shallow‐marine environment ~520 Ma ago. The breccia comprises i) a strongly disturbed lower polymict subunit with occasional, in themselves brecciated, crystalline mega‐clasts locally exceeding 50 m surrounded by contorted sediments; ii) a middle, commonly normally graded, crystalline‐rich, polymict subunit, in turn locally overlain by iii) a thin fine‐grained quartz sandstone, <30 cm thick. The upper sandstone is sporadically either overlain, or replaced, by a conglomerate. In progressively more distal parts of the ejecta layer, the lower subunit is better described as only slightly disturbed strata. The lower subunit is suggested to have formed by ejecta bombardment of the strata surrounding the impact crater, even causing some net outwards mobilization of the sediments. The middle subunit and the uppermost quartz sandstone are considered resurge deposits. The top conglomerate may be caused by subsequent wave reworking and slumping of material from the elevated rim. Quartz grains showing planar deformation features are present in the graded polymict subunit and the upper sandstone, that is, the inferred resurge deposits.     

Statistical simulation of wave climate and extreme beach erosion

Recent developments in extreme values modelling have been used to develop a framework for determining the coastal erosion hazard on sandy coastlines. This framework quantitatively reproduced the extreme beach erosion volumes obtained from field measurements at Narrabeen Beach, Australia. This encouraging finding was achieved using Kriebel and Dean's [Kriebel, D.L. and Dean, R.G., 1993. Convolution method for time-dependent beach profile response. Journal of Waterway, Port, Coastal and Ocean Engineering, 119(2): 204–226.] simple beach erosion and accretion model. The method includes allowances for joint probability between all basic erosion variates including; wave height, period and direction, event duration, tidal anomalies and event spacing. A new formulation for the dependency between wave height and period has been developed. It includes the physical wave steepness limitation. Event grouping, where significantly more erosion can occur from two closely spaced storms is handled by temporally simulating the synthetic wave climate and the resulting beach erosion and accretion.     

Three‐dimensional modelling of differential railway track settlement using a cycle domain constitutive model

A method for simulation of differential (spatially varying) track settlement in a ballasted railway track is presented. It employs a cycle domain constitutive model to determine accumulated plastic (permanent) deformation of the granular layers supporting the track. The constitutive model is adopted for both the ballast and the sub‐ballast but with different parameter sets. The proposed framework can be used to predict differential track settlement accounting for heterogeneous (space‐variant) track characteristics and loading conditions. Here, it is demonstrated for three‐dimensional continuum modelling of a railway crossing panel subjected to a large number of axle passages. Because of the design of the crossing panel and the transient character of the impact loads on the crossing, the load transferred into the track bed is not uniform along the track, and the resulting differential settlement leads to vertical irregularities in track geometry. The spatial variation of track settlement is calculated both along the sleepers and along the rails. The influences of the number of adjacent sleepers accounted for in the model and the stiffness of the subgrade on the predicted settlement at the crossing are studied. Copyright © 2016 John Wiley & Sons, Ltd.