Direct evidence of the feedback between climate and weathering

Long-term climate moderation is commonly attributed to chemical weathering; the higher the temperature and precipitation the faster the weathering rate. Weathering releases divalent cations to the ocean via riverine transport where they promote the drawdown of CO₂ from the atmosphere by the precipitation and subsequent burial of carbonate minerals. To test this widely-held hypothesis, we performed a field study determining the weathering rates of 8 nearly pristine north-eastern Iceland river catchments with varying glacial cover over 44 years. The mean annual temperature and annual precipitation of these catchments varied by 3.2 to 4.5 °C and 80 to 530%, respectively during the study period. Statistically significant linear positive correlations were found between mean annual temperature and chemical weathering in all 8 catchments and between mean annual temperature and both mechanical weathering and runoff in 7 of the 8 catchments. For each degree of temperature increase, the runoff, mechanical weathering flux, and chemical weathering fluxes in these catchments are found to increase from 6 to 16%, 8 to 30%, and 4 to 14% respectively, depending on the catchment. In contrast, annual precipitation is less related to the measured fluxes; statistically significant correlations between annual precipitation and runoff, mechanical weathering, and chemical weathering were found for 3 of the least glaciated catchments. Mechanical and chemical weathering increased with time in all catchments over the 44 year period. These correlations were statistically significant for only 2 of the 8 catchments due to scatter in corresponding annual runoff and average annual temperature versus time plots. Taken together, these results 1) demonstrate a significant feedback between climate and Earth surface weathering, and 2) suggest that weathering rates are currently increasing with time due to global warming.     

A lateral model parameter correlation procedure for one-dimensional inverse modelling

We present a new, fast and versatile method, the lateral parameter correlation method, of invoking lateral smoothness in model sections of one-dimensional (1D) models. Modern, continuous electrical and electromagnetic methods are capable of recording very large data sets and except for a few cases, standard inversion methodology still relies on 1D models. In environments where the lateral rate of change of resistivity is small, 1D inversion can be justified but model sections of concatenated 1D models do not necessarily display the expected lateral smoothness.
The lateral parameter correlation method has three steps. First, all sounding data are inverted individually. Next, a laterally smooth version of each model parameter, one at a time, is found by solving a simple constrained inversion problem. Identity is postulated between the uncorrelated and correlated parameters and the equations are solved including a model covariance matrix. As a last step, all sounding data are inverted again to produce models that better fit the data, now subject to constraints by including the correlated parameter values as a priori values. Because the method separates the inversion from the correlation it is much faster than methods where the inversion and correlation are solved simultaneously, typically with a factor of 200–500.
Theoretical examples show that the method produces laterally smooth model sections where the main influence comes from the well-determined parameters in such a way that problems with equivalence and poor resolution are alleviated. A field example is presented, demonstrating the improved resolution obtained with the lateral parameter correlation method. The method is very flexible and is capable of coupling models from inversion of different data types and information from boreholes.     

Distribution of erosion across bedrock channels

Lateral erosion in bedrock rivers is an important control on the shape of channel cross‐sections, and the coupling of channels and hillslopes. Recent observations link lateral erosion to the variability of flow. We propose two mechanisms to explain this. One is based on changing shear stress distributions within the channel with varying flood level, the other on the competition between cover and tool effects in fluvial bedrock erosion. We assess these processes for the Liwu River, Taiwan, and conclude that cover and tool effects dominate the partitioning of lateral and vertical erosion in this case. Copyright © 2007 John Wiley & Sons, Ltd.     

A priori models and inversion of gravity gradient data in hilly terrain

The increased popularity of airborne measurements of the gravity gradient tensor for resource studies and geological mapping has resulted in a new awareness of the importance of terrain effects. In these measurements, the terrain effect often overwhelms that of the underlying crust and it becomes important to formulate a strategy for taking it into account when presenting the data and when inverting the data into density models. Using newly acquired data from Northern Sweden, we first attempted to estimate a variable terrain density model by inverting the data using a terrain model with a laterally varying density. Using data weights related to the topography variations, we find the best estimate of the lateral variation of the terrain density. We translate this model into a full three-dimensional model such that all columns have the same vertical centre of mass as estimated from inspecting the radially averaged power spectrum of the area. This then defines a reference model for subsequent three-dimensional inversion of the gravity gradient tensor dataset. We tested this approach first on synthetic data calculated from the measured topography including two density anomalies before we applied it to the measured data. The result is a model in which the surface density variations are propagated downwards in a systematic manner now in better agreement with measured densities of rock samples in the area.     

Tectonic,sedimentary and diagenetic controls on sediment maturity of lower Cambrian quartz arenite from southwestern Baltica

Lower Cambrian quartz arenitic deposits have a worldwide occurrence. In this study, petrographic and mineralogical analyses were carried out on samples from the quartz‐rich Ringsaker Member of the Vangsås Formation from southern Norway and the corresponding Hardeberga Formation from southern Sweden and on the Danish island of Bornholm. The quartz arenite is almost completely quartz cemented and has an average intergranular volume of 30%. The quartz cement is the dominating cause for porosity loss. Dissolution along stylolites and microstylolites is suggested to be the primary and secondary source for the quartz cement respectively. The quartzose sandstone from southern Norway was severely cemented prior to the Caledonian Orogeny, thus limiting the tectonic influence on diagenesis during thrusting. For most samples, authigenic clay minerals and detrital phyllosilicates represent ca. 5% of the present‐day composition. This, together with a low feldspar content, of on average 4%, indicates that the sediment was extremely quartz‐rich already during deposition. The low amount of feldspar prior to burial and the formation of early diagenetic kaolinite point to weathering, sediment reworking and early diagenesis act as important controls on sediment maturity. The large variation in clay‐mineral and feldspar content between the localities, as well as within the sandstone successions, can be explained by different palaeogeography on the shelf during deposition and subsequently dissimilar subjection to reworking and early diagenetic processes. Weathering in the provenance area, reworking in the depositional shallow‐marine environment and meteoric flushing during the burial stage are suggested to explain the high mineralogical maturity of the lower Cambrian sandstone from southwestern Baltica. These processes may generally account for similar quartz‐rich shallow‐marine sandstone units, deposited as a result of intensive continental denudation and during temperate to subtropical and moderately humid conditions.     

The petrogenesis of leucogranitic dykes intruding the northern Semail ophiolite, United Arab Emirates: field relationships, geochemistry and Sr/Nd isotope systematics

The Khawr Fakkan block of the Semail ophiolite (United Arab Emirates) exhibits a suite of 10–100 m scale metaluminous to peraluminous granitic intrusions, ranging from cordierite-andalusite-biotite monzogranites to garnet-tourmaline leucogranites, which intrude mantle sequence harzburgites and lower crustal sequence cumulate gabbros. Structural constraints suggest that the subduction of continental sedimentary material beneath the hot proto-ophiolite in an intra-oceanic arc environment led to granulite facies metamorphism at the subduction front and the generation of granitic melts which were emplaced up to the level of the ophiolite Moho. Compositions indicate the analysed granitoids were largely minimum melts that crystallised at variable a _H2O and pressures of 3 to 5 kbar. The LILE (Sr, Rb and Ba) covariation modelling suggests that the granitoids formed largely by the dehydration melting of muscovite rich metasediments. Initial ⁸⁷Sr/⁸⁶Sr ratios of analysed dykes vary between 0.710 and 0.706 at initial ɛ_Nd values of between −6.3 and −0.5. Cogenetic units of a composite sill from Ra's Dadnah yield a Sm-Nd isochron age of 98.8 ± 9.5 Ma (MSWD = 1.18). Geochemical and isotopic characteristics of the analysed granitic intrusions indicate that the subducted continental material was derived from oceanic trench fill (Haybi complex) sediments, preserved as greenschist (Asimah area) to granulite facies (Bani Hamid area) ophiolitic metamorphic sole terranes. The Sr-Nd isotope systematics suggest that hybrid granitic melts were derived from pre-magmatic mixing of two contrasting subduction zone sources. Received: 17 December 1998 / Accepted: 19 July 1999     

Effect of ship structure and size on grounding and collision damage distributions

It has been argued that a major shortcoming in the International Maritime Organization (IMO) Interim Guidelines for Approval of Alternative Methods of Design and Construction of Oil Tankers in Collision and Grounding is that grounding and collision damages normalized by the main dimensions of the ship have the same probability density distributions regardless of a particular structural design and ship size.The present paper explores analytical methods for assessing the overall effect of structural design on the damage distributions in accidental grounding and collisions. The results are expressed in simple expressions involving structural dimensions and the building material of the ships. The study shows that the density distribution for collision and grounding damages normalized by the main dimensions of the ship depends on the size of the ship. A larger ship has a higher probability of a larger relative damage length than that of a smaller ship in grounding damage. On the other hand, the damages to the side structure caused by ship collisions are found to be relatively smaller for large ships.The main conclusion is that the existing IMO damage distributions will severely underestimate the grounding damages to the bottom structure of larger vessels and to a lesser extent overestimate collision damages to the side structure of the hull.     

Crustal structure of the ultra-slow spreading Knipovich Ridge,North Atlantic,along a presumed ridge segment center

A combined ocean bottom seismometer, multichannel seismic reflection and gravity study has been carried out along the spreading direction of the Knipovich Ridge over a topographic high that defines a segment center. The youngest parts of the crust in the immediate vicinity of the ridge reveal fractured Oceanic Layer 2 and thermally expanded and possibly serpentinized Oceanic Layer 3. The mature part of the crust has normal thickness and seismic velocities with no significant crustal thickness and seismic velocity variations. Mature Oceanic Layer 2 is in addition broken into several rotated fault blocks. Comparison with a profile acquired ~40 km north of the segment center reveals significant differences. Along this profile, reported earlier, periods of slower spreading led to generation of thin crust with a high P-wave velocity (Vp), composed of a mixture of gabbro and serpentinized mantle, while periods of faster spreading led to generation of more normal gabbroic crust. For the profile across the segment center no clear relation exists between spreading rate and crustal thickness and seismic velocity. In this study we have found that higher magmatism may lead to generation of oceanic crust with normal thickness even at ultra-slow spreading rates.     

Comparing pristine and depleted ecosystems: The Sørfjord, Norway versus the Gulf of St. Lawrence, Canada. Effects of intense fisheries on marine ecosystems

The Sørfjord, Norway, and the Gulf of St. Lawrence, Canada, are two sub-arctic ecosystems with similar trophic structure. However, in the Gulf of St. Lawrence, severe exploitation of groundfish stocks has lead to important shifts in the trophic structure. In the Sørfjord, the situation is different: fishing pressure is much lighter. Our hypothesis is that overexploitation leads to changes in the trophic structure and severely alters the resilience of ecosystems. Based on the same modelling approach (Ecopath with Ecosim) the food web structure was compared, using different ecosystem indicators. Patterns of food web structure and trophodynamics were contrasted. Cod was the keystone species in both ecosystems, and forage fish were also important. Even after similar environmental changes in both ecosystems, and after a reduction of fishing pressure in the Gulf of St. Lawrence, there is no recovery of cod stocks in this ecosystem. In the Sørfjord, after different perturbations (but not from the fishery), the ecosystem seems to return to its equilibrium.