Selenium distribution in the Rhône delta and the Gulf of Lions

Total dissolved selenium and selenium species have been measured in the Rhône river delta and the Gulf of Lions within the framework of the EROS-2000 project. The Rhône river concentration of total selenium averages 2.30 nM with important variations related to river discharge. During estuar-ine mixing, the concentrations of total dissolved selenium, selenite and selenate (calculated as the difference between total dissolved and selenite) decrease linearly with increasing salinity, without significant interconversion between selenium species. In the open Mediterranean waters of the Gulf of Lions the total dissolved selenium increases from 0.5 nM in the surface waters to 0.9 nM in the deep waters. Organic selenium has been observed in Mediterranean deep water, an observation which is different from those from the Atlantic and the Pacific Oceans. The distributions of total inorganic selenium (Σ5e), selenite and selenate are strongly related to phosphate and silicate concentrations as observed previously for the major oceans.     

Particle-bound phosphorus along an urbanized coastal plain estuary

The distribution of particle-bound phosphorus in the suspended sediment of the Delaware Estuary was examined with a sequential chemical leaching technique. The phosphorus content of particles was highest in the tidal river (140–250 μmol g⁻¹) near major anthropogenic inputs. Despite this enrichment of river particles with phosphorus, suspended particles within the salinity gradient had a phosphorus content more similar to the world's average. Sequential chemical leaches revealed that particulate phosphorus was associated with organic matter, aluminum oxides, iron oxides, and apatite in all areas of the estuary. However, ‘excess’ particle-bound phosphorus in the tidal river was associated mainly with iron oxides (27%), aluminum oxides (23%), and organic matter (50%). Within the salinity gradient, particulate phosphorus associated with iron oxides, aluminum oxides, and apatite all decreased with increasing salinity. Estuarine mixing was simulated to determine whether the observed decreases in particle-bound phosphorus pools in field samples were due to release into solution. During simulated mixing, particulate phosphorus associated with iron and aluminum oxides decreased, but no change was observed in apatite-bound phosphorus. The results of the mixing study combined with the observed particle-bound phosphorus distributions suggest that phosphate concentrations along the Delaware Estuary may be partially ‘buffered’ by aluminum and iron oxide phases.     

Dynamics of ship collisions

This paper described a procedure for simulation of the outer dynamics in ship collisions.The simulation procedure is derived using the transient equations for the horizontal motion of a ship. The hydrodynamic forces acting on the ships' hull during the collision are calculated by a strip method, where the forces acting on each section are described by means of unit response functions. These functions are determined by cosine transformation of the sectional dampings. The sectional added masses and dampings, and thereby also the sectional unit response functions, are calculated by an approximate method. The deformations of the slip structures during the collisions are modelled as non-linear springs.The resulting system of non-linear equations is solved using a numerical time-integration procedure.A number of different collision situations are simulated by means of the procedure.     

Rapid visualization of plankton abundance and taxonomic composition using the Video Plankton Recorder

Traditional methods for determining spatial distributions of planktonic taxa involve net, pump, and bottle collections followed by the tedious and time-consuming task of plankton sample analysis. Thus, plankton ecologists often require months or even years to process samples from a single study. In this paper, we present a method that allows rapid visualization of the distribution of planktonic taxa while at sea. Rapid characterization of plankton distributions is essential in the dynamic physical environment, where biological and physical patterns can change quickly. Such a “sample-and-observe” capability is necessary for mapping ephemeral features (such as patches, eddies, jets, plumes) and determining appropriate locations to conduct more localized sampling, including in situ observational studies. We describe the techniques used in imaging the plankton, analyzing the video, and visualizing the data. We present an example of at-sea data analysis conducted aboard R.V. Columbus Iselin on Georges Bank in May 1994 and visualizations of the 3-dimensional distribution of selected planktonic taxa in a 2 × 2 km × 90 m volume of seawater. A video of the image processing and visualization is included on the CD-ROM accompanying this volume and is an essential part of this paper.     

Geochemical and hydrodynamic constraints on the distribution of trace metal concentrations in the lagoon of Nouméa, New Caledonia

Seawater samples were collected in the lagoon of Nouméa (southwest New Caledonia) along two transects from eutrophic coastal bays to the oligotrophic barrier reef. Land-based emissions to the lagoon were measured with dissolved and particulate concentrations of chromium (Cr) and nickel (Ni), used as tracers of both terrigenous and industrial (Ni ore treatment) activities, as well as dissolved and particulate concentrations of zinc (Zn), used as a tracer of urban effluents. The spatial variability of metal concentrations was related to geochemical and hydrodynamic conditions, i.e., respectively: (1) natural and anthropogenic emission sources, and chemical processes occurring in the water column; and (2) water residence times. The parameter used to describe the residence time of water masses was the local e-flushing time, i.e. the time required for a tracer mass contained within a given station to be reduced by a factor 1/e. High metal concentrations were found in coastal areas (up to 9000 ng dissolved Ni L⁻¹), and steeply decreased with distance from the coast (down to 101 ng dissolved Ni L⁻¹ near the barrier reef) to reach levels similar to those found in remote Pacific waters, suggesting a rapid renewal of waters close to the barrier. Distributions of metals in the lagoon are controlled upstream by land-based emission sources and later chemical processes. Then hydrodynamics constrain metal distributions, as shown by the observed relationship between local e-flushing times and the spatial variability of metal concentrations. In addition, a change in the direction of prevailing winds yielded a decrease of dissolved metal concentrations at the same site by a factor of 2.5 (Cr and Ni) and 2.9 (Zn). It is suggested that the residence time is a key parameter in the control of elemental concentrations in the lagoon waters, as much as land-based emission sources.     

Community turnover provides insight into variable invertebrate recovery between restored streams with different integrated catchment management plans

ABSTRACT

Understanding temporal patterns in restored environments is important for identifying potential barriers to recovery and improved management of degraded habitats. In this paper, we use temporal beta diversity analyses to compare invertebrate community recovery trajectories in three restored agricultural stream sites under different integrated catchment plans, a native forest reference site, and two unmodified pasture control stream sites over 24 years. The restored sites diverged from their initial community composition over time and became more similar to the reference site community, which was relatively stable over time. Variation partitioning showed that prior to restoration beta diversity was primarily associated with environmental and spatial drivers, whereas post-restoration beta diversity was more influenced by temporal and environmental drivers, including changes in substrate size, fine sediments, water clarity, and nutrients, as well as temperature and flow regime. Species’ contributions to beta diversity varied between sites and years, with sensitive EPT taxa contributing more in reference and control sites. However, contributions of some EPT species, particularly mayflies, increased in restored sites post-ICM. In summary, after nearly two decades of ICM, restored stream sites show recovery towards reference conditions, yet differences persist, indicating that rehabilitation may take longer, depending on the restoration goals.     

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.     

Habitat characteristics and spatial arrangement affecting the diversity of fish and decapod assemblages of seagrass (Zostera marina) beds around the coast of Jersey (English Channel)

Recent research and management plans for seagrass habitats have called for landscape level approaches. The present study examines the spatial utilisation of subtidal seagrass beds by fish and decapods around the coast of Jersey (49°N 02° W). A hierarchical scale of landscape configuration and the plant characteristics of eight seagrass beds were measured and the contributions of these variables as predictors of the properties of the fish and decapod assemblages were evaluated using multiple linear regression models. The results indicated that total diversity had a negative relationship with transect heterogeneity and total species number had a weak negative association with increasing fragmentation. Both total diversity and total species number showed a positive relationship with depth. In fact, in all models of species number and densities, values were higher in deeper seagrass beds. Total decapod density increased with aggregation of seagrass patches within a landscape. In addition to landscape configuration, smaller-scale structural changes in both canopy height and epiphyte load appeared to influence densities of decapod crustaceans. At night, fewer patterns could be explained by the independent variables in the model.     

A new bathymetric model for the central Fram Strait

Based on data from R/V Polarstern multibeam sonar surveys between 1984 and 1997 high resolution bathymetry has been generated for the central Fram Strait. The area insonified covers approx. 36,500 km² between 78–80°N and 0–7.5°E allowing the creation of a Digital Terrain Model (DTM) with 100 m grid spacing. The DTM was utilized for contouring and generation of a new series of bathymetric charts (AWI Bathymetric Charts of the Fram Strait, AWI BCFS) at a scale of 1:100,000. The paper starts with a brief introduction to the regional setting of the study area comprising information on the local links between bathymetry, sea ice transport and water mass exchange. The bathymetric feature names used in this article and how they were chosen is outlined. Next, the input data and processing applied are described. Thereafter the newly created grid and contour data are put into context with existing data sets. Finally the main bathymetric features of the area are characterized and the generated data products available for public disposal are specified.