Development and validation of a regional coupled atmosphere lake model for the Caspian Sea Basin

We present a validation analysis of a regional climate model coupled to a distributed one dimensional (1D) lake model for the Caspian Sea Basin. Two model grid spacings are tested, 50 and 20 km, the simulation period is 1989–2008 and the lateral boundary conditions are from the ERA-Interim reanalysis of observations. The model is validated against atmospheric as well as lake variables. The model performance in reproducing precipitation and temperature mean seasonal climatology, seasonal cycles and interannual variability is generally good, with the model results being mostly within the observational uncertainty range. The model appears to overestimate cloudiness and underestimate surface radiation, although a large observational uncertainty is found in these variables. The 1D distributed lake model (run at each grid point of the lake area) reproduces the observed lake-average sea surface temperature (SST), although differences compared to observations are found in the spatial structure of the SST, most likely as a result of the absence of 3 dimensional lake water circulations. The evolution of lake ice cover and near surface wind over the lake area is also reproduced by the model reasonably well. Improvements resulting from the increase of resolution from 50 to 20 km are most significant in the lake model. Overall the performance of the coupled regional climate—1D lake model system appears to be of sufficient quality for application to climate change scenario simulations over the Caspian Sea Basin.     

The Influence of the Solar Coronal Radiation on Coronal Plasma Structures,I: Determination of the Incident Coronal Radiation

Coronal structures receive radiation not only from the solar disc, but also from the corona. This height-dependent incident radiation plays a crucial role in the excitation and the ionisation of the illuminated plasma. The aim of this article is to present a method for computing the detailed incident radiation coming from the solar corona, which is perceived at a point located at an arbitrary height. The coronal radiation is calculated by integrating the radiation received at a point in the corona over all of the corona visible from this point. The emission from the corona at all wavelengths of interest is computed using atomic data provided by CHIANTI. We obtain the spectrum illuminating points located at varying heights in the corona at wavelengths between 100 and 912 Å when photons can ionise H or He atoms and ions in their ground states. As expected, individual spectral lines will contribute most at the height within the corona where the local temperature is closest to their formation temperature. As there are many spectral lines produced by many ions, the coronal intensity cannot be assumed to vary in the same way at all wavelengths and so must be calculated for each separate height that is to be considered. This code can be used to compute the spectrum from the corona illuminating a point at any given height above the solar surface. This brings a necessary improvement to models where an accurate determination of the excitation and ionisation states of coronal plasma structures is crucial.     

Climate extremes in Loess of China coupled with the strength of deep-water formation in the North Atlantic

The loess-paleosol sequences of the last 1.2 Ma in China have recorded two kinds of climate extremes: the strongly developed S4, S5-1 and S5-3 soils (corresponding to the marine δ¹⁸O stages 11, 13, and 15, respectively) as evidence of three episodes of great warmth and two coarse-grained loess units (L9 and L15, corresponding to the marine δ¹⁸O stages 22, 23, 24 and 38, respectively) which indicate severest glacial conditions. The climatic and geographical significance of these events are still unclear, and their cause remains a puzzle.Paleopedological, geochemical and magnetic susceptibility data from three loess sections (Xifeng, Changwu and Weinan) suggest that the S4, S5-1 and S5-3 soils were formed under sub-tropical semi-humid climates with a tentatively estimated mean annual temperature (MAT) of at least 4–6°C higher and a mean annual precipitation (MAP) of 200–300 mm higher than for the present-day, indicating a much strengthened summer monsoon. The annual rainfall was particularly accentuated for the southern-most part of the Loess Plateau, suggesting that the monsoon rain belt (the contact of the monsoonal northward warm-humid air mass with the dry-cold southward one) might have stood at the southern part of the Plateau for a relatively long period each year. The loess units L9 and L15 were deposited under semi-desertic environments with a tentatively estimated MAT and MAP of only about 1.5–3°C and 150–250 mm, indicating a much strengthened winter monsoon, and that the summer monsoon front could rarely penetrate into the Loess Plateau region.Correlation with marine carbon isotope records suggests that these climate extremes have large regional, even global, significance rather than being local phenomena in China. They match the periods with greatest/smallest Atlantic–Pacific δ¹³C gradients, respectively, indicating their relationships with the strength of Deep Water (NADW) production in the North Atlantic. These results suggest that the monsoon climate in the Loess Plateau region was significantly linked with the North Atlantic thermohaline circulation on timescales of 10⁴ years.     

Heliocentric evolution of the degradation of polyoxymethylene: Application to the origin of the formaldehyde (H2CO) extended source in Comet C/1995 O1 (Hale-Bopp)

The H₂CO production rates measured in Comet C/1995 O1 (Hale-Bopp) from radio wavelength observations [Biver, N., and 22 colleagues, 2002a. Earth Moon Planets 90, 5-14] showed a steep increase with decreasing heliocentric distance. We studied the heliocentric evolution of the degradation of polyoxymethylene (formaldehyde polymers: (CH₂O)_n, also called POM) into gaseous H₂CO. POM decomposition can indeed explain the H₂CO density profile measured in situ by Giotto spacecraft in the coma of Comet 1P/Halley, which is not compatible with direct release from the nucleus [Cottin, H., Bénilan, Y., Gazeau, M.-C., Raulin, F., 2004. Icarus 167, 397-416]. We show that the H₂CO production curve measured in Comet C/1995 O1 (Hale-Bopp) can be accurately reproduced by this mechanism with a few percents by mass of solid POM in grains. The steep heliocentric evolution is explained by the thermal degradation of POM at distances less than 3.5 AU. This study demonstrates that refractory organics present in cometary dust can significantly contribute to the composition of the gaseous coma. POM, or POM-like polymers, might be present in cometary grains. Other molecules, like CO and HNC, might also be produced by a similar process.     

Analytical description of physical librations of saturnian coorbital satellites Janus and Epimetheus

Janus and Epimetheus are famously known for their distinctive horseshoe-shaped orbits resulting from a 1:1 orbital resonance. Every 4 years these two satellites swap their orbits by a few tens of kilometers as a result of their close encounter. Recently Tiscareno et al. (Tiscareno, M.S., Thomas, P.C., Burns, J.A. [2009]. Icarus 204, 254-261) have proposed a model of rotation based on images from the Cassini orbiter. These authors inferred the amplitude of rotational librational motion in longitude at the orbital period by fitting a shape model to Cassini ISS images. By a quasi-periodic approximation of the orbital motion, we describe how the orbital swap impacts the rotation of the satellites. To that purpose, we have developed a formalism based on quasi-periodic series with long- and short-period librations. In this framework, the amplitude of the libration at the orbital period is found proportional to a term accounting for the orbital swap. We checked the analytical quasi-periodic development by performing a numerical simulation and find both results in good agreement. To complete this study, the results obtained for the short-period librations are studied with the help of an adiabatic-like approach.     

Polarimetric NIR reflectance measurements of regolith simulants at zero phase angle

Polarimetric reflectance measurements have been made at a wavelength of for a suite of predominantly lunar regolith simulants in support of development efforts for the BepiColombo Laser Altimeter (BELA). Measurements were made using an instrument at the University of Bern, Switzerland, that has been modified to accommodate photometric characterizations of laboratory samples down to 0^° phase angle (g) with linearly polarized illumination and a linearly polarized receiver. The data reveal opposition surges that are dominated by polarization state-conserving reflectance terms for all samples. Relative strengths of the trans-state reflectance terms are lowest for the darkest samples, suggesting that multiple scattering is responsible for state conversions. Normal albedo measurements of the lunar simulants range from 0.13 to 0.22 at zero illumination angle (i=0^°). The total reflectance of the regolith simulants at g=0^° were found to decrease with increasing i, which is inconsistent with predictions of reflectance models for Mercury. However, the g=0^° reflectance remains higher at i>0^° than would be expected for a gray Lambert surface that is scaled to the g=i=0^° reflectance value. Polarization ratios for reflectance under polarized illumination but unconstrained emission show that the samples scatter light in the in-plane polarization state more efficiently than in the transverse state at g=0^° and i>0^°. The opposite is true for g>0^° polarization ratios, which indicate that transverse polarized illumination scatters more efficiently at high g. The polarization effect appears to correlate with the sample's characteristic grain size, but the statistical basis of this trend is weak. The implications of these measurements upon the performance of the BELA instrument are discussed.     

TNOs are Cool: A Survey of the Transneptunian Region

Over one thousand objects have so far been discovered orbiting beyond Neptune. These trans-Neptunian objects (TNOs) represent the primitive remnants of the planetesimal disk from which the planets formed and are perhaps analogous to the unseen dust parent-bodies in debris disks observed around other main-sequence stars. The dynamical and physical properties of these bodies provide unique and important constraints on formation and evolution models of the Solar System. While the dynamical architecture in this region (also known as the Kuiper Belt) is becoming relatively clear, the physical properties of the objects are still largely unexplored. In particular, fundamental parameters such as size, albedo, density and thermal properties are difficult to measure. Measurements of thermal emission, which peaks at far-IR wavelengths, offer the best means available to determine the physical properties. While Spitzer has provided some results, notably revealing a large albedo diversity in this population, the increased sensitivity of Herschel and its superior wavelength coverage should permit profound advances in the field. Within our accepted project we propose to perform radiometric measurements of 139 objects, including 25 known multiple systems. When combined with measurements of the dust population beyond Neptune (e.g. from the New Horizons mission to Pluto), our results will provide a benchmark for understanding the Solar debris disk, and extra-solar ones as well.     

Probing the IRC+10 ° 216 circumstellar envelope using spectroscopic observations of background stars

A unique and novel set of observations has been undertaken to study the circumstellar envelope (CSE) of the nearby (130 pc) carbon star IRC +10° 216 using optical absorption spectroscopy towards twobackground stars lying beyond the envelope.The primary aim of the observations is to search for diffuse band (DIB)carriers in the CSE. The circumstellar H+2H₂column density expected along the line of sight towards the targets islarge compared to that derived from the small interstellar reddening inthis region, E _B-V< 0.03 mag. We summarise our mainfindings, already reported in Kendall et al. (2002): The 6284Å DIB is detected in the VLT/UVES spectrum of one target, but clearly arises inthe foreground ISM. No other DIB is seen. Hence the DIB carriers, if present in the CSE, have a low abundance relative to H in the C-rich envelope of IRC +10°216, in comparison with this ratio in theISM. An important new result, previously unreported, concerns the detectionof circumstellar C₂ via absorption of the Phillips bandnear 8760Å.     

Mass‐dependent fractionation of nickel isotopes in meteoritic metal

Abstract— We measured nickel isotopes via multicollector inductively coupled plasma mass spectrometry (MC‐ICPMS) in the bulk metal from 36 meteorites, including chondrites, pallasites, and irons (magmatic and non‐magmatic). The Ni isotopes in these meteorites are mass fractionated; the fractionation spans an overall range of ～0.4‰ amu^?1. The ranges of Ni isotopic compositions (relative to the SRM 986 Ni isotopic standard) in metal from iron meteorites (～0.0 to ～0.3‰ amu^?1) and chondrites (～0.0 to ～0.2‰ amu^?1) are similar, whereas the range in pallasite metal (～–0.1 to 0.0‰ amu^?1) appears distinct. The fractionation of Ni isotopes within a suite of fourteen IIIAB irons (～0.0 to ～0.3‰ amu^?1) spans the entire range measured in all magmatic irons. However, the degree of Ni isotopic fractionation in these samples does not correlate with their Ni content, suggesting that core crystallization did not fractionate Ni isotopes in a systematic way. We also measured the Ni and Fe isotopes in adjacent kamacite and taenite from the Toluca IAB iron meteorite. Nickel isotopes show clearly resolvable fractionation between these two phases; kamacite is heavier relative to taenite by ～0.4‰ amu^?1. In contrast, the Fe isotopes do not show a resolvable fractionation between kamacite and taenite. The observed isotopic compositions of kamacite and taenite can be understood in terms of kinetic fractionation due to diffusion of Ni during cooling of the Fe‐Ni alloy and the development of the Widmanstätten pattern.     

GETEMME—a mission to explore the Martian satellites and the fundamentals of solar system physics

GETEMME (Gravity, Einstein??s Theory, and Exploration of the Martian Moons?? Environment), a mission which is being proposed in ESA??s Cosmic Vision program, shall be launched for Mars on a Soyuz Fregat in 2020. The spacecraft will initially rendezvous with Phobos and Deimos in order to carry out a comprehensive mapping and characterization of the two satellites and to deploy passive Laser retro-reflectors on their surfaces. In the second stage of the mission, the spacecraft will be transferred into a lower 1500-km Mars orbit, to carry out routine Laser range measurements to the reflectors on Phobos and Deimos. Also, asynchronous two-way Laser ranging measurements between the spacecraft and stations of the ILRS (International Laser Ranging Service) on Earth are foreseen. An onboard accelerometer will ensure a high accuracy for the spacecraft orbit determination. The inversion of all range and accelerometer data will allow us to determine or improve dramatically on a host of dynamic parameters of the Martian satellite system. From the complex motion and rotation of Phobos and Deimos we will obtain clues on internal structures and the origins of the satellites. Also, crucial data on the time-varying gravity field of Mars related to climate variation and internal structure will be obtained. Ranging measurements will also be essential to improve on several parameters in fundamental physics, such as the Post-Newtonian parameter ?? as well as time-rate changes of the gravitational constant and the Lense-Thirring effect. Measurements by GETEMME will firmly embed Mars and its satellites into the Solar System reference frame.