On the Existence of Coverage and Integration Time Regimes in Bistatic SAR Configurations

Bistatic synthetic aperture radar (SAR) is an extension of traditional monostatic SAR, which increases the flexibility in designing SAR missions. We describe a scheme for the computation of integration time and azimuth coverage of bistatic SARs based on space-time diagrams. A classification of bistatic SAR configurations is introduced in terms of size and velocity on the ground of antenna footprints. Bistatic SAR regimes are also identified.     

The REMIND-R model: the role of renewables in the low-carbon transformation—first-best vs. second-best worlds

Can near-term public support of renewable energy technologies contain the increase of mitigation costs due to delays of implementing emission caps at the global level? To answer this question we design a set of first and second best scenarios to analyze the impact of early deployment of renewable energy technologies on welfare and emission timing to achieve atmospheric carbon stabilization by 2100. We use the global multiregional energy?Ceconomy?Cclimate hybrid model REMIND-R as a tool for this analysis. An important design feature of the policy scenarios is the timing of climate policy. Immediate climate policy contains the mitigation costs at less than 1% even if the CO₂ concentration target is 410?ppm by 2100. Delayed climate policy increases the costs significantly because the absence of a strong carbon price signal continues the carbon intensive growth path. The additional costs can be decreased by early technology policies supporting renewable energy technologies because emissions grow less, alternative energy technologies are increased in capacity and their costs are reduced through learning by doing. The effects of early technology policy are different in scenarios with immediate carbon pricing. In the case of delayed climate policy, the emission path can be brought closer to the first-best solution, whereas in the case of immediate climate policy additional technology policy would lead to deviations from the optimal emission path. Hence, technology policy in the delayed climate policy case reduces costs, but in the case of immediate climate policy they increase. However, the near-term emission reductions are smaller in the case of delayed climate policies. At the regional level the effects on mitigation costs are heterogeneously distributed. For the USA and Europe early technology policy has a positive welfare effect for immediate and delayed climate policies. In contrast, India looses in both cases. China loses in the case of immediate climate policy, but profits in the delayed case. Early support of renewable energy technologies devalues the stock of emission allowances, and this effect is considerable for delayed climate policies. In combination with the initial allocation rule of contraction and convergence a relatively well-endowed country like India loses and potential importers like the EU gain from early renewable deployment.     

Spatial resolution of transport parameters in a subtropical karst conduit system during dry and wet seasons

Karst aquifers are characterized by a high degree of hydrologic variability and spatial heterogeneity of transport parameters. Tracer tests allow the quantification of these parameters, but conventional point-to-point experiments fail to capture spatiotemporal variations of flow and transport. The goal of this study was to elucidate the spatial distribution of transport parameters in a karst conduit system at different flow conditions. Therefore, six tracer tests were conducted in an active and accessible cave system in Vietnam during dry and wet seasons. Injections and monitoring were done at five sites along the flow system: a swallow hole, two sites inside the cave, and two springs draining the system. Breakthrough curves (BTCs) were modeled with CXTFIT software using the one-dimensional advection-dispersion model and the two-region nonequilibrium model. In order to obtain transport parameters in the individual sections of the system, a multi-pulse injection approach was used, which was realized by using the BTCs from one section as input functions for the next section. Major findings include: (1) In the entire system, mean flow velocities increase from 183 to 1,043 m/h with increasing discharge, while (2) the proportion of immobile fluid regions decrease; (3) the lowest dispersivity was found at intermediate discharge; (4) in the individual cave sections, flow velocities decrease along the flow direction, related to decreasing gradients, while (5) dispersivity is highest in the middle section of the cave. The obtained results provide a valuable basis for the development of an adapted water management strategy for a projected water-supply system.     

Methodology and use of tensor invariants for satellite gravity gradiometry

Although its use is widespread in several other scientific disciplines, the theory of tensor invariants is only marginally adopted in gravity field modeling. We aim to close this gap by developing and applying the invariants approach for geopotential recovery. Gravitational tensor invariants are deduced from products of second-order derivatives of the gravitational potential. The benefit of the method presented arises from its independence of the gradiometer instrument’s orientation in space. Thus, we refrain from the classical methods for satellite gravity gradiometry analysis, i.e., in terms of individual gravity gradients, in favor of the alternative invariants approach. The invariants approach requires a tailored processing strategy. Firstly, the non-linear functionals with regard to the potential series expansion in spherical harmonics necessitates the linearization and iterative solution of the resulting least-squares problem. From the computational point of view, efficient linearization by means of perturbation theory has been adopted. It only requires the computation of reference gravity gradients. Secondly, the deduced pseudo-observations are composed of all the gravitational tensor elements, all of which require a comparable level of accuracy. Additionally, implementation of the invariants method for large data sets is a challenging task. We show the fundamentals of tensor invariants theory adapted to satellite gradiometry. With regard to the GOCE (Gravity field and steady-state Ocean Circulation Explorer) satellite gradiometry mission, we demonstrate that the iterative parameter estimation process converges within only two iterations. Additionally, for the GOCE configuration, we show the invariants approach to be insensitive to the synthesis of unobserved gravity gradients.     

Multi-scale characterization of a complex karst and alluvial aquifer system in southern Germany using a combination of different tracer methods

Water suppliers face major challenges such as climate change and population growth. To prepare for the future, detailed knowledge of water resources is needed. In southern Germany, the state water supplier Zweckverband Landeswasserversorgung provides 3 million people with drinking water obtained from a complex karst and alluvial aquifer system and the river Danube. In this study, a combination of different tracing techniques was used with the goal of a multi-scale characterization of the aquifer system and to gain additional knowledge about groundwater flow toward the extraction wells in the Danube Valley. For the small-scale characterization, selected groundwater monitoring wells were examined using single-borehole dilution tests. With these tests, a wide range of flow behavior could be documented, including fast outflow within just a few hours in wells with good connection to the aquifer, but also durations of many weeks in low-permeability formations. Vertical flow, caused by multiple flow horizons or uprising groundwater, was detected in 40% of the tested wells. A regional multi-tracer test with three injections was used to investigate the aquifer on a large scale. For the highly karstified connection between a swallow hole and a spring group, high flow velocities of around 80 m/h could be documented. Exceptionally delayed arrivals, 250 and 307 days after the injection, respectively showing maximum velocities of 0.44 and 0.39 m/h, were observed in an area where low-permeability sediments overlay the karst conduits. With the chosen methods, a distinct heterogeneity caused by the geological setting could be documented on both scales.

     

SN 2009ip and SN 2010mc as dual-shock Quark-Novae

In recent years a number of double-humped supernovae （SNe） have been discovered. This is a feature predicted by the dual-shock Quark-Nova （QN） model where an SN explosion is followed （a few days to a few weeks later） by a QN explo- sion. SN 2009ip and SN 2010mc are the best observed examples of double-humped SNe. Here, we show that the dual-shock QN model naturally explains their light curves including the late time emission, which we attribute to the interaction between the mixed SN and QN ejecta and the surrounding circumstellar matter. Our model applies to any star （O-stars, luminous blue variables, Wolf-Rayet stars, etc.） provided that the mass involved in the SN explosion is ~ 20 Mo which provides good conditions for forming a QN.     

Analysis of seafloor backscatter strength dependence on the survey azimuth using multibeam echosounder data

The sediment backscatter strength measured by multibeam echosounders is a key feature for seafloor mapping either qualitative (image mosaics) or quantitative (extraction of classifying features). An important phenomenon, often underestimated, is the dependence of the backscatter level on the azimuth angle imposed by the survey line directions: strong level differences at varying azimuth can be observed in case of organized roughness of the seabed, usually caused by tide currents over sandy sediments. This paper presents a number of experimental results obtained from shallow-water cruises using a 300-kHz multibeam echosounder and specially dedicated to the study of this azimuthal effect, with a specific configuration of the survey strategy involving a systematic coverage of reference areas following “compass rose” patterns. The results show for some areas a very strong dependence of the backscatter level, up to about 10-dB differences at intermediate oblique angles, although the presence of these ripples cannot be observed directly—neither from the bathymetry data nor from the sonar image, due to the insufficient resolution capability of the sonar. An elementary modeling of backscattering from rippled interfaces explains and comforts these observations. The consequences of this backscatter dependence upon survey azimuth on the current strategies of backscatter data acquisition and exploitation are discussed.     

Review: Microbial biocenoses in pristine aquifers and an assessment of investigative methods

The current knowledge of microbial biocenoses (communities) in pristine aquifers is presented in a review, which also discusses their relevance for questions of groundwater protection. Aquifers are heterogeneous on all scales and structured in a variety of habitats. The void spaces in many aquifers are small. The biocenoses are thus predominantly composed of microorganisms and, often, microinvertebrates. Larger voids and macroorganisms occur in karst cavities. Due to the absence of light, the biocenoses depend on chemical energy resources, which are, however, scarce in non-contaminated groundwater. The microorganisms thus show small cell sizes, low population densities and reduced activity; they developed specific strategies to survive oligotrophic conditions. The review also discusses the impact of contamination on the biocenoses, and the potential use of the biocenoses or specific organisms as indicators for groundwater quality, and the limits of this approach. Bacteria are either planktonic or attached to aquifer material, which requires both fluid and solid phase sampling. Most groundwater bacteria are viable but non-culturable. Consequently, cultivation techniques give an incomplete picture of the biocenoses, while methods from molecular microbiology provide genetic fingerprints of the entire community. Different analytical methods are available to count microorganisms, identify species, characterise microbial diversity, and measure activity.     

Review: Thermal water resources in carbonate rock aquifers

The current knowledge on thermal water resources in carbonate rock aquifers is presented in this review, which also discusses geochemical processes that create reservoir porosity and different types of utilisations of these resources such as thermal baths, geothermal energy and carbon dioxide (CO₂) sequestration. Carbonate aquifers probably constitute the most important thermal water resources outside of volcanic areas. Several processes contribute to the creation of porosity, summarised under the term hypogenic (or hypogene) speleogenesis, including retrograde calcite solubility, mixing corrosion induced by cross-formational flow, and dissolution by geogenic acids from deep sources. Thermal and mineral waters from karst aquifers supply spas all over the world such as the famous bath in Budapest, Hungary. Geothermal installations use these resources for electricity production, district heating or other purposes, with low CO₂ emissions and land consumption, e.g. Germany’s largest geothermal power plant at Unterhaching near Munich. Regional fault and fracture zones are often the most productive zones, but are sometimes difficult to locate, resulting in a relatively high exploration uncertainty. Geothermal installations in deep carbonate rocks could also be used for CO₂ sequestration (carbonate dissolution would partly neutralise this gas and increase reservoir porosity). The use of geothermal installations to this end should be further investigated.