The Australia Telescope 20-GHz (AT20G) Survey: the Bright Source Sample

The Australia Telescope 20-GHz (AT20G) Survey is a blind survey of the whole southern sky at 20 GHz (with follow-up observations at 4.8 and 8.6 GHz) carried out with the Australia Telescope Compact Array from 2004 to 2007.
The Bright Source Sample (BSS) is a complete flux-limited subsample of the AT20G Survey catalogue comprising 320 extragalactic     ) radio sources south of  δ=−15°  with      Jy. Of these, 218 have near simultaneous observations at 8 and 5 GHz.
In this paper we present an analysis of radio spectral properties in total intensity and polarization, size, optical identifications and redshift distribution of the BSS sources. The analysis of the spectral behaviour shows spectral curvature in most sources with spectral steepening that increases at higher frequencies (the median spectral index α, assuming   S ∝ν^α  , decreases from  α^8.6_4.8= 0.11  between 4.8 and 8.6 GHz to  α²⁰_8.6=−0.16  between 8.6 and 20 GHz), even if the sample is dominated by flat spectra sources (85 per cent of the sample has  α²⁰_8.6 > −0.5)  . The almost simultaneous spectra in total intensity and polarization allowed us a comparison of the polarized and total intensity spectra: polarized fraction slightly increases with frequency, but the shapes of the spectra have little correlation. Optical identifications provided an estimation of redshift for 186 sources with a median value of 1.20 and 0.13, respectively, for QSO and galaxies.     

GPU accelerated radio astronomy signal convolution

The increasing array size of radio astronomy interferometers is causing the associated computation to scale quadratically with the number of array signals. Consequently, efficient usage of alternate processing architectures should be explored in order to meet this computational challenge. Affordable parallel processors have been made available to the general scientific community in the form of the commodity graphics card. This work investigates the use of the Graphics Processing Unit in the parallelisation of the combined conjugate multiply and accumulation stage of a correlator for a radio astronomy array. Using NVIDIA’s Compute Unified Device Architecture, our testing shows processing speeds from one to two orders of magnitude faster than a Central Processing Unit approach.     

Applied focused ion beam techniques for sample preparation of astromaterials for integrated nanoanalysis

Abstract— Sample preparation is always a critical step in the study of micrometer‐sized astromaterials available for study in the laboratory, whether their subsequent analysis is by electron microscopy or secondary ion mass spectrometry. A focused beam of gallium ions has been used to prepare electron transparent sections from an interplanetary dust particle (IDP), as part of an integrated analysis protocol to maximize the mineralogical, elemental, isotopic, and spectroscopic information extracted from one individual particle. In addition, focused ion beam (FIB) techniques have been employed to extract cometary residue preserved on the rims and walls of microcraters in 1100 series aluminum foils that were wrapped around the sample tray assembly on the Stardust cometary sample collector. Non‐ideal surface geometries and inconveniently located regions of interest required creative solutions. These include support pillar construction and relocation of a significant portion of sample to access a region of interest. Serial sectioning, in a manner similar to ultramicrotomy, is a significant development and further demonstrates the unique capabilities of focused ion beam microscopy for sample preparation of astromaterials.     

Disputed South China Sea hydrocarbons in perspective

Maritime and territorial disputes have been a source of tension among the states bordering the South China Sea for decades. These disputes are often framed as being at least partially driven by the desire to gain access to much needed seabed hydrocarbon resources. Suggestions that major oil and gas riches are at stake in the South China Sea have arguably encouraged States to be inflexible in their claims and negatively impacted on bilateral relations. Indeed, controversial incidents relating to hydrocarbon exploration have occurred on multiple occasions, and as recently as mid-2011.This paper critically examines the South China Sea ‘hydrocarbon factor’. The wide range of estimates that circulate in the public domain are discussed in detail. Using a hypothetical and optimistic estimate of disputed oil and gas reserves based on the best possible interpretation of available data, depletion and production curve analysis is applied to determine the production profile of disputed reserves, and an evaluation of their potential benefit to energy security for each country with claims in the South China Sea is made. Analysis shows that constraints on production mean that disputed South China Sea oil and gas may only constitute a small part of the solution to Southeast Asia's growing energy security challenges, and does not have the capacity to reverse the trend of growing reliance on imports to the region. Escalating demand for imported hydrocarbons would instead reinforce the importance of sea-lane security to regional energy security.     

Hydrological thresholds of soil surface properties identified using conditional inference tree analysis

There has been limited success in determining critical thresholds of ground cover or soil characteristics that relate to significant changes in runoff or sediment production at the microscale (<1 m²), particularly in semi‐arid systems where management of ground cover is critical. Despite this lack of quantified thresholds, there is an increasing research focus on the two‐phase mosaic of vegetation patches and inter‐patches in semi‐arid systems. In order to quantify ground cover and soil related thresholds for runoff and sediment production, we used a data mining technique known as conditional inference tree analysis to determine statistically significant values of a range of measured variables that predicted average runoff, peak runoff, sediment concentration and sediment production at the microscale. On Chromic Luvisols across a range of vegetation states in semi‐arid south‐eastern Australia, large changes in runoff and sediment production were related to a hierarchy of different variables and thresholds, but the percentage of bare soil played a primary role in predicting runoff and sediment production in most instances. The identified thresholds match well with previous thresholds found in semi‐arid and temperate regions (including the approximate values of 30%, 50% and 70% total ground cover). The analysis presented here identified the critical role of soil surface roughness, particularly where total ground cover is sparse. The analysis also provided evidence that a two‐phase mosaic of patches and inter‐patches identified via rapid visual assessment could be further delineated into distinct groups of hydrological response, or a multi‐phase rather than a two‐phase system. The approach used here may aid in assessing scale‐dependent responses and address data non‐linearity in studies of semi‐arid hydrology. Copyright © 2012 John Wiley & Sons, Ltd.     

Stratigraphic and structural control on the distribution of gas hydrates and active gas seeps on the Posolsky Bank, Lake Baikal

The distribution and origin of shallow gas seeps in the vicinity of the Posolsky Bank in Lake Baikal were studied based on the integration of detailed seismic, multibeam, and hydro-acoustic water-column investigations. In all, 65 acoustic flares have been detected on the Posolsky Fault scarp near the crest of the bank and in a similar, nearby setting at water depths of ?43 to ?332?m. The seismic data reveal BSRs (bottom-simulating reflectors) occurring up to water depths of ?300?m. Calculations involving hydrate stability, heat flow, and topographic modulation based on BSR occurrence and multibeam bathymetry enabled prediction of a methane–ethane gas mixture and heat-flow values that would account for gas hydrate stability in the lake sediments under prevailing ambient conditions. These predictions are supported by ground truth data. The findings suggest that seeps concentrated along the crest of the Posolsky Bank are fed mainly by gas coming from below the base of the gas hydrate stability zone, which would migrate updip via permeable stratigraphic pathways beneath the bank. Gas would ultimately be released into the water column where these pathways are cut off by faults.

Fumarole monitoring with a handheld infrared camera: Volcán de Colima,Mexico, 2006–2007

This paper describes a methodology for the monitoring of fumarole temperatures at medium ranges (~ 6 km) using a handheld infrared camera (wavelength range: 8–13.5 µm). As a relationship between fumarole temperatures, gas flux and volcanic activity has been demonstrated by a number of studies, fumarole temperature data has a potential use as a monitoring tool. Volcán de Colima is an andesitic stratovolcano with a 300 m diameter summit crater formed by the destruction of the 2004 lava dome by a series of explosions in 2005. Between January 2006 and August 2007, sequences of thermal images were recorded from a viewpoint 6 km to the north during regular 24–48 hour monitoring excursions. The temperatures of fumaroles on the crater rim and the ground surface on the volcano's flanks were measured. A methodology was developed to remove data affected by clouds or volcanic water vapour based on rates of temperature change and scatter within the data. For the remaining data, it is demonstrated mathematically that at this range, typical variations in atmospheric transmissivity will affect the apparent temperatures by +/− 2 °C, while a 25% change in fumarole heat flux would change it by 5–10 °C. The mean night-time apparent temperature of the fumaroles was calculated for each excursion and showed an irregular decline over the 19 month period. Subtracting the radiant heat flux of flank rocks from those of the fumaroles removes seasonal variations and gives the clearest view of trends in the fumarole heat flux. A sharp drop in fumarole temperature during February 2007 coincided with the emergence of a lava dome in the crater. The declining fumarole temperature is interpreted to reflect decreasing gas flux from the crater in line with a change in eruptive regime from frequent, small, ash-rich explosions to slow effusion of lava.     

Seepage erosion in layered stream bank material

Current stream restoration practices often require anthropogenic manipulation of natural field soils to reconstruct stream banks in the absence of stabilizing vegetation. For this study, researchers conducted laboratory experiments on reconstructed, non‐vegetated stream banks with layered soils experiencing seepage. The objective of the study was to determine the effect of seepage, pore water pressure, and bank geometry on erosion and bank stability of layered streambanks. The experimental design consisted of an intermediate‐size soil lysimeter packed with a sandy clay loam top soil and an underlying fine sand layer at three bank slopes (90°, 45° and 26°). Shallow groundwater flow and seepage resulted in bank failure of geometrically stable banks. Pop out failures, liquid deformation, and piping were all observed failure mechanisms in the underlying sand material, dependent on the bank angle. Groundwater seepage processes created small‐scale failures of the underlying sand leading to larger‐scale failures of the overlying sandy clay loam. The underlying sand layer eroded according to the initial bank angle and change in overburden loading. The overlying loam layer failed along linear failure planes. The gradually sloped bank (i.e. 26° slope) failed faster, hypothesized to be due to less confining pressure and greater vertical seepage forces. Researchers analyzed the laboratory experiments using the Bank Stability and Toe Erosion Model, version 4·1. The model calculated an accurate shear surface angle similar to the failure angle observed in the lysimeter tests. The model predicted failure only for the undercut 90° bank slope, and indicated stable conditions for the other geometries. Steeper initial bank slopes and undercut banks decreased the bank factor of safety. The observed failure mechanisms and measured saturation data indicated an interaction between overburden pressure, seepage forces, and bank slope on bank stability. Future bank stability modeling would benefit by incorporating lateral seepage erosion and soil liquefaction prediction calculations. Copyright © 2009 John Wiley & Sons, Ltd.     

Long-period seismicity during magma movement at Volcán de Colima

During the period from February to September 2005, Volcán de Colima produced 30 Vulcanian explosions of sufficient magnitude to produce pyroclastic flows of variable size, with a total volume of at least 2.5 × 10⁶ m³. Swarms of long-period events were associated with each event, their duration ranging from about 6 h to 3 days and each swarm containing up to 886 events. The characteristics of the swarms have been studied to understand the source mechanism and their relationship with the Vulcanian explosions. In total, 12,548 long-period events were analysed using various comparative and statistical methods. Patterns were not apparent in the data with no correlation between different properties of the swarms (duration, magnitude or frequency of occurrence of LP events) and the magnitude of the associated Vulcanian explosion, whether recorded by seismicity, volume of pyroclastics or altitude of the eruption column. This, along with other characteristics of the swarms, such as the continuation of the swarm after the explosion, with an increase in long-period event amplitude in some cases, suggests that the mechanism is not merely associated with the pressurization under an impermeable cap and resulting pressure differentials between adjacent volumes within the system. It is more likely that the production of long-period events is dominated by brittle fracturing on the margins of an ascending magma body. A model is proposed whereby the unloading above the ascending magma column produced by a Vulcanian explosion resulted in an increase in ascent rate, reflected in the increasing amplitude of long-period events. The results reflect the complexity of non-linear processes involved during magma ascent, degassing, crystallization and rupture of the impermeable plug during the Vulcanian process. At Volcán de Colima, as at many volcanoes, long-period events represent a useful precursor for eruptive activity. For monitoring, this paper highlights some useful analyses that can be carried out, which could illustrate certain characteristics of an eruptive episode. A preliminary model is presented of the conduit processes at work during the cyclic extrusive and explosive activity during 2005.