Gold-Related Sulfide Mineralization and Ore Genesis of the Penjom Gold Deposit, Pahang, Malaysia

The Penjom gold deposit lies on the eastern side of the Raub‐Bentong Suture line within the Central Belt of Permo‐Triassic rocks, near Kuala Lipis, Pahang, Malaysia. The geology of the deposit is dominated by a sequence of fine‐ to coarse‐grained rhyolitic to rhyodacitic tuff, tuff‐breccia and a minor rhyolitic–rhyodacitic volcanic series, associated with argillaceous marine sedimentary rocks consisting of shale with subordinate shalely limestone of Padang Tungku Formation and Pahang Volcanic Series. Fine‐ to coarse‐grained tonalite and quartz porphyry intruded this unit. The main structural features of the area are north–south‐trending left‐lateral strike‐slip faults and their subsidiaries, which generally strike north–south and dip moderately to the east (350°–360°/40°–60°). Mineralization at the Penjom gold deposit is structurally controlled and also erratic laterally and vertically. The gold mineralization can be categorized as (i) gold associated with carbonate‐rich zones hosted within dilated quartz veins carrying significant amount of sulfides; (ii) gold disseminated within stockwork of quartz–carbonate veins affiliated with tonalite; and (iii) gold often associated with arsenopyrite and pyrite in quartz–carbonate veins and stringers hosted within shear zones of brittle–ductile nature in all rock types and in brittle fractured rhyodacitic volcanic rocks. Sphalerite, chalcopyrite, tetrahedrite and pyrrhotite are the minerals accompanying the early stage of gold mineralization. These minerals also suffered from local brittle deformation. However, most of the gold mineralization took place after the deposition of these sulfides. Galena appears somewhat towards the end of gold mineralization, whereas tellurium and bismuth accompanied gold contemporaneously. The gold mineralization occurred most probably due to the metamorphogenic deformational origin concentrated mostly in the shear zone. The mineralization is strongly controlled by the wall rock (e.g. graphitic shale), the sulfide minerals and fluid–rock interaction.     

The role of meltwater in glacial processes

Water plays a dominant role in many glacial processes and the erosional, depositional and climatic significance of meltwaters and associated fluvioglacial processes cannot be overemphasized. At its maximum extent c. 20,000 years ago, the volume of the Laurentide ice sheet was 33 × 10⁶ km³ (about the same as the volume of all ice present today on planet Earth). The bulk of this was released as water in little more than 10,000 years. Pulses of meltwater flowing to the Atlantic Ocean from large ice dammed lakes altered thermohaline circulation of the world's oceans and global climate. One such discharge event via Hudson Bay at 8200 years BP released 160,000 km³ of water in 12 months. Global sea levels recovered from glacial maximum low stands reached at about 20,000 years ago at an average rate of 15 m per thousand years but estimates of shorter term rates suggest as much as 20 m sea level rise in 1000 years and for short periods, rates as high as 4 m per hundred years. Meltwaters played a key role in lubricating ice sheet motion (and thus areal abrasion) across the inner portions of the ice sheet where it slid over rigid crystalline bedrock of the Canadian Shield. The recharge of meltwater into the ice sheets bed was instrumental in generating poorly sorted diamict sediments (till) by sliding-induced shearing and deformation of overpressured sediment and soft rock. The transformation of overpressured till into hyperconcentrated slurries in subglacial channels may have generated a highly effective erosional tool for selective overdeepening and sculpting of bedrock substrates. Some workers credit catastrophic subglacial ‘megafloods’ with the formation of drumlins and flutes on till surfaces. Subglacial melt river systems were instrumental in reworking large volumes of glaciclastic sediment to marine basins; it has been estimated that less than 6% of the total volume of glaciclastic sediment produced during the Pleistocene remains on land. Fluvioglacial and glaciolacustrine sediments and landforms dominate large tracts of the ‘glacial’ landscape in North America. The recharge of subglacial meltwater into underlying bedrock and sediment aquifers created transient reversals in the long-term equilibrium flow directions of basinal fluids. With regard to pre-Pleistocene glacial record, meltwaters moved enormous volumes of terrestrial ‘glaciclastic’ sediment to marine basins and thus played a key role in preserving a record of glaciation, a record otherwise almost entirely lost on land.     

Iron oxides in comet 81P/Wild 2

Abstract– We have used synchrotron Fe‐XANES, XRS, microRaman, and SEM‐TEM analyses of Stardust track 41 slice and track 121 terminal area slices to identify Fe oxide (magnetite‐hematite and amorphous oxide), Fe‐Ti oxide, and V‐rich chromite (Fe‐Cr‐V‐Ti‐Mn oxide) grains ranging in size from 200 nm to ～10 μm. They co‐exist with relict FeNi metal. Both Fe‐XANES and microRaman analyses suggest that the FeNi metal and magnetite (Fe₂O₃FeO) also contain some hematite (Fe₂O₃). The FeNi has been partially oxidized (probably during capture), but on the basis of our experimental work with a light‐gas gun and microRaman analyses, we believe that some of the magnetite‐hematite mixtures may have originated on Wild 2. The terminal samples from track 121 also contain traces of sulfide and Mg‐rich silicate minerals. Our results show an unequilibrated mixture of reduced and oxidized Fe‐bearing minerals in the Wild 2 samples in an analogous way to mineral assemblages seen in carbonaceous chondrites and interplanetary dust particles. The samples contain some evidence for terrestrial contamination, for example, occasional Zn‐bearing grains and amorphous Fe oxide in track 121 for which evidence of a cometary origin is lacking.     

Rangeland management and climate hazards in drylands: dust storms,desertification and the overgrazing debate

This paper examines the theory and supporting evidence for links between desertification, drought and dust storms with a particular focus on studies undertaken in and around the Gobi Desert. Overgrazing of rangeland by pastoralists has been the most commonly cited cause of desertification in global drylands for more than 30 years, but the evidence supporting this link is not always convincing. Nonetheless, overgrazing, desertification and dust storms are frequently connected, regardless. Drought is another well-known and important driver of vegetation cover change. Distinguishing between vegetation cover adversely affected by drought and that reduced by grazing is imperative for policy makers because identifying the incorrect driver of vegetation change risks the development of inappropriate policy.     

Syn‐rift mass flow generated ‘tectonofacies’ and ‘tectonosequences’ of the Kingston Peak Formation,Death Valley,California, and their bearing on supposed Neoproterozoic panglacial climates

The Kingston Peak Formation of the Pahrump Group in the Death Valley region of the Basin and Range Province, USA, is the thick (over 3 km) mixed siliciclastic–carbonate fill of a long‐lived structurally‐complex Neoproterozoic rift basin and is recognized by some as a key ‘climatostratigraphic’ succession recording panglacial Snowball Earth events. A facies analysis of the Kingston Peak Formation shows it to be largely composed of ‘tectonofacies’ which are subaqueous mass flow deposits recording cannibalization of older Pahrump carbonate strata exposed by local faulting. Facies include siltstone, sandstone and conglomerate turbidites, carbonate megabreccias (olistoliths) and related breccias, and interbedded debrites. Secondary facies are thin carbonates and pillowed basalts. Four distinct associations of tectonofacies (‘base‐of‐scarp’; FA1, ‘mid‐slope’; FA2, ‘base‐of‐slope’; FA3, and a ‘carbonate margin’ association; FA4) reflect the initiation and progradation of deep water clastic wedges at the foot of fault scarps. ‘Tectonosequences’ record episodes of fault reactivation resulting in substantial increases in accommodation space and water depths, the collapse of fault scarps and consequent downslope mass flow events. Carbonates of FA4 record the cessation of tectonic activity and resulting sediment starvation ending the growth of clastic wedges. Tectonosequences are nested within regionally‐extensive tectono‐stratigraphic units of earlier workers that are hundreds to thousands of metres in thickness, recording the long‐term evolution of the rifted Laurentian continental margin during the protracted breakup of Rodinia. Debrite facies of the Kingston Peak Formation are classically described as ice‐contact glacial deposits recording globally‐correlative panglacials but they result from partial to complete subaqueous mixing of fault‐generated coarse‐grained debris and fine‐grained distal sediment on a slope conditioned by tectonic activity. The sedimentology (tectonofacies) and stratigraphy (tectonosequences) of the Kingston Peak Formation reflect a fundamental control on local sedimentation in the basin by faulting and likely earthquake activity, not by any global glacial climate.     

Systematics of crack controlled mechanical properties for a suite of Conway granites from the White Mountains, New Hampshire

The Conway granite of New Hampshire is a highly radioactive intrusive into which a 1-km deep borehole was drilled and continuously cored. The formation is composed of two major granitic units, the Osceola and the Conway; and it is cut by three lamprophyre dikes. The suite of rocks used in this paper contained eight granitic and two lamprophyre samples on which acoustic and strain measurements were performed over the pressure range of 1 atm. to 0.4 GPa. The V_p data were subjected to cluster analyses to determine what, if any, similarities in pressure-dependence existed among the samples. Three distinct similarity groupings were found: the lamprophyre dike rocks and two groups each of which contains samples from both granitic units. These groupings by V_p behavior were also found to correlate exactly with sample similarity groupings formed by dynamic and static moduli data, crack spectra, and rock texture. Such sample similarities in the functional forms of the pressure-dependence were found not to correlate with mineral modes nor with original in situ depth, but rather with grain size and the degree to which the mineral phases were homogeneously mixed. A consideration of the results suggests that for these rocks, grain size and mineral phase homogeneity exerted a dominant influence on crack population formation. Further, it appears that the exhumation and coring of these samples may have intensified the amount of cracking over that in situ but it did not necessarily introduce any individual distinct crack populations.     

Ottawa: the knowledge city and a labyrinth of obstacles

This research provides a comparative examination of Ottawa as an archetype of a knowledge city. Among Canada’s four largest cities, Ottawa is unique in terms of the characteristics of its labor force, the nature of its employment mix, and its infrastructure. Since the high-tech downturn of 2001, some of Ottawa’s options as a knowledge city seem to be contracting, despite some simultaneously encouraging signs (like recovering employment levels in the high-tech sector). This raises a question about Ottawa’s potential longevity as a knowledge center. The challenge is to understand the inventory of obstacles faced by the city, and address the sort of alchemy required to maintain and improve its competitiveness as a knowledge city.     

Using Sealed Wells to Measure Water Levels Beneath Streams and Floodplains

The design of wells beneath streams and floodplains has often employed with tall standpipes to prevent incursion of surface water into the well during flood events. Here, an approach has been presented to minimise the infrastructure demands in these environments by sealing the well top (e.g., prevent water entering the well) and monitor the total pressure in the water column using an absolute (non‐vented) pressure transducer. The sealed well design was tested using a laboratory experiment where the total pressure responses were monitored in both an unsealed and sealed well, while the water level was varied. It is observed that, whether the well is sealed or not, the total pressure at a given depth in the aquifer will be equal to that within the well. This indicates that the sealed well design is a viable alternative to tall standpipes and also facilitates installation of wells beneath streams and floodplains.