Small-scale mantle flows and induced lithospheric stress near island arcs

Summary. This paper explores the middle ground between complex thermally-coupled viscous flow models and simple corner flow models of island arc environments. The calculation retains the density-driven nature of convection and relaxes the geometrical constraints of corner flow, yet still provides semianalytical solutions for velocity and stress. A novel aspect of the procedure is its allowance for a coupled elastic lithosphere on top of a Newtonian viscous mantle. Initially, simple box-like density drivers illustrate how vertical and horizontal forces are transmitted through the mantle and how the lithosphere responds by trench formation. The flexural strength of the lithosphere spatially broadens the surface topography and gravity anomalies relative to the functional form of the vertical flow stresses applied to the plate base. I find that drivers in the form of inclined subducting slabs cannot induce self-driven parallel flow; however, the necessary flow can be provided by supplying a basal drag of 1–5 MPa to the mantle from the oceanic lithosphere. These basal drag forces create regional lithospheric stress and they should be quantifiable through seismic observations of the neutral surface. The existence of a shallow elevated phase transition is suggested in two slab models of 300 km length where a maximum excess density of 0.2 g cm⁻³ was needed to generate an acceptable mantle flow. A North New Hebrides subduction model which satisfies flow requirements and reproduces general features of topography and gravity contains a high shear stress zone (75 MPa) around the upper slab surface to a depth of 150 km and a deviatoric tensional stress in the back arc to a depth of 70 km. The lithospheric stress state of this model suggests that slab detachment is possible through whole plate fracture.     

Correction to: Projection of Iron Ore Production

Natural Resources Research - The original version of this article unfortunately contained an error in Equation 3.     

An assessment of geologic sequestration potential in the panhandle of Florida USA

One alternative to reduce global greenhouse gas emissions is to store the emissions in underground geologic sequestration repositories. The efficacy of this approach has been favorably evaluated by numerous authors over the last 15 years. This paper discusses an assessment of the overall feasibility of storing emissions in three different repositories in the Florida panhandle located in the Southeastern United States. The feasibility assessment evaluates both saline aquifers and oil reservoirs located in the panhandle region. The overall feasibility is driven by the available geologic sequestration capacity, the transportation cost to deliver emissions to a respective repository, and other engineering and regulatory issues. The geologic sequestration capacity is generally controlled by the so-called storage efficiency, a variable dependent on the site-specific geology, reservoir conditions, and the injected fluid characteristics. For this paper, storage efficiency for saline repositories was assessed in more detail using numerical modeling. Based on the work completed, the 3 repositories studied have at least 4.55 gigatonnes of capacity to sequester CO₂.     

Temporal and geochemical evolution of the Cenozoic intraplate volcanism of Zealandia

In order to constrain better the distribution, age, geochemistry and origin of widespread Cenozoic intraplate volcanism on Zealandia, the New Zealand micro-continent, we report new ⁴⁰Ar/³⁹Ar and geochemical (major and trace element and Sr–Nd–Hf–Pb isotope) data from offshore (Chatham Rise, Campbell and Challenger Plateaus) and onland (North, South, Auckland, Campbell, Chatham and Antipodes Islands of New Zealand) volcanism on Zealandia. The samples include nephelinite, basanite through phonolite, alkali basalt through trachyte/rhyolite, and minor tholeiite and basaltic andesite, all of which have ocean island basalt (OIB)-type trace element signatures and which range in age from 64.8 to 0.17 Ma. Isotope ratios show a wide range in composition (⁸⁷Sr/⁸⁶Sr = 0.7027–0.7050, ¹⁴³Nd/¹⁴⁴Nd = 0.5128–0.5131, ¹⁷⁷Hf/¹⁷⁶Hf = 0.2829–0.2831, ²⁰⁶Pb/²⁰⁴Pb = 18.62–20.67, ²⁰⁷Pb/²⁰⁴Pb = 15.54–15.72 and ²⁰⁸Pb/²⁰⁴Pb = 38.27–40.34) with samples plotting between mid-ocean-ridge basalts (MORB) and Cretaceous New Zealand intraplate volcanic rocks.Major characteristics of Zealandia's Cenozoic volcanism include longevity, irregular distribution and lack of age progressions in the direction of plate motion, or indeed any systematic temporal or spatial geochemical variations. We believe that these characteristics can be best explained in the context of lithospheric detachment, which causes upwelling and melting of the upper asthenospheric mantle and portions of the removed lithosphere. We propose that a large-scale seismic low-velocity anomaly, that stretches from beneath West Antarctica to Zealandia at a depth of > 600 km may represent a geochemical reservoir that has been in existence since the Cretaceous, and has been supplying the upper mantle beneath Zealandia with HIMU-type plume material throughout the Cenozoic. In addition, the sources of the Cenozoic intraplate volcanism may be at least partially derived through melting of locally detached Zealandia lower lithosphere.     

Modelling the advance–retreat cycle of a tidewater glacier with simple sediment dynamics

We present a simple coupled glacier-sediment model to simulate the evolution of a tidewater glacier. The model is based on a consideration of the total mass budget of a glacier, whereas ice mechanics are fully parameterized. The calving rate at the glacier terminus is assumed to be proportional to the water depth. We show that the formation of a morainic shoal has a profound influence on the response of a tidewater glacier to climatic forcing. For a slow periodic forcing of the equilibrium-line altitude, the model glacier advances steadily into the estuary, builds up a submarine terminal moraine, and then retreats rapidly when a critical point is hit. For a slowly increasing equilibrium-line altitude, at a rate as low as 1 m per 5 years, we find terminus retreat rates of up to 10 km in 50 years. Our model suggests that, although the response of tidewater glaciers to external forcing is strongly nonlinear, the onset of retreat is controlled by climate change.     

New friends in new places: Network formation during the migration process among Poles in the UK

This paper contributes to on-going work that seeks to understand the dynamic nature of immigrant social network formation. We explore three propositions, derived from the literature, that might be expected to characterise the ways in which migrant associational ties evolve during and immediately after arrival in their destination country. Evidence is drawn from 42 interviews conducted between January and December 2008 with predominantly Polish migrants to the UK (28) as well as domestic service providers (14). In agreement with the existing literature on immigrant social network formation we find that weak associational ties between migrants are locally dense and rapidly formed. More surprisingly, we also find that the Poles in our sample from lower socio-economic groups tended to rely heavily upon weak associational ties while higher socio-economic group Poles tended to rely on associations made through their employing institutions. This illustrates the importance of socio-economic status in framing co-ethnic migrant network formation. This is significant because we also find that weak associational ties are not unambiguously beneficial to lower socio-economic group migrants who tend to (have to be) more compromising about, and therefore more compromised by, the social ‘friendships’ that result.     

Mineralogy and major-element geochemistry of the lower Permian Greta Seam,Sydney Basin,Australia

The mineralogy of the high-volatile bituminous coals and associated strata from the Greta seam, Sydney Basin, Australia, has been evaluated in this study. Although the seam is not immediately overlain by marine strata, percolation of marine water into the original peat bed is indicated by the petrological, mineralogical and geochemical characteristics, which resemble those of coals with marine roof strata. The upper and lower sections of the seam have contrasting mineralogy. Pyrite typically comprises 40 to 56 wt% of the mineral assemblage in the marine-influenced upper part of the seam section. The lower part contains much less pyrite (typically <5 wt%, organic-free basis), and also relatively abundant dawsonite (up to 14 wt%, organic-free basis). The minerals within most coal plies are largely of authigenic origin. These include pyrite, siderite, clay minerals (mainly kaolinite and Na-rich mixed-layer illite/smectite), and quartz, most of which have a relatively early, syngenetic origin. Minor Ti-bearing minerals, anatase or rutile, and phosphate minerals, fluorapatite and goyazite, were probably also formed during early diagenesis. Other minerals have features that indicate late-stage precipitation. These include abundant cleat- and fracture-filling dawsonite, which may be the result of reactions between earlier-precipitated kaolinite and Na₂CO₃- or NaHCO₃-bearing fluids. Minor albite may also be epigenetic, possibly precipitated from the same Ca–Al bearing fluids that formed the dawsonite. The most abundant detrital minerals in the Greta coals are quartz, poorly ordered kaolinite, illite and mixed-layer illite/smectite (I/S). These occur mainly in the floor, roof and other epiclastic horizons of the seam, reflecting periods of greater clastic influx into those parts of the original peat-forming environment. Detrital minerals are rare in the coals away from the epiclastic horizons, probably owing to almost complete sediment bypassing in the depositional system. Alternatively, any detrital minerals that were originally present may have been leached from the peat bed by diagenetic or post-diagenetic processes.     

Cosmochemical and spectroscopic properties of Northwest Africa 7325—A consortium study

This work is part of a project to build an infrared database in order to link IR data of planetary materials (and therefore possible Mercury material) with remote sensing observations of Mercury, which will probably be obtained by the MERTIS instrument on the forthcoming BepiColombo mission. The unique achondrite Northwest Africa (NWA) 7325, which has previously been suggested to represent the first sample from Mercury, was investigated by optical and electron microscopy, and infrared and Raman spectroscopy. In addition, the oxygen, strontium, xenon, and argon isotopes were measured and the abundance of selected trace elements determined. The meteorite is a cumulate rock with subchondritic abundances of HFSE and REE and elevated Sr contents, which underwent a second heating and partial remelting process. Oxygen isotope measurements show that NWA 7325 plots in the ureilite field, close to the ALM‐A trachyandesitic fragment found in the unique Almahata Sitta meteorite breccia. On the other hand, mineralogical investigations of the pyroxenes in NWA 7325 provide evidence for similarities to the lodranites and acapulcoites. Furthermore, the rock is weakly shocked and argon isotope data record ancient (~4.5 Ga) plateau ages that have not been reset. The sample records a cosmogenic exposure age of ~19 Ma. Systematics of Rb‐Sr indicate an extreme early volatile depletion of the precursor material, similar to many other achondrite groups. However, despite its compositional similarities to other meteorite groups, our results suggest that this meteorite is unique and unrelated to any other known achondrite group. An origin for NWA 7325 as a sample from the planet Mercury is not supported by the results of our investigation. In particular, the evidence from infrared spectroscopy indicates that a direct relationship between NWA 7325 and the planet Mercury can be ruled out: no acceptable spectral match between laboratory analyses and remote sensing observations from Mercury has been obtained. However, we demonstrate that infrared spectroscopy is a rapid and nondestructive method to characterize mineral phases and thus an excellent tool for planetary surface characterization in space missions.